Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
168,566 matching · page 101/3372Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-82390(opens NVD record) | Low | 3.7 | The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation handlers aes_ecb_op(), aes_cbc_op() and aes_ctr_op() then ran aes_hal_transform_block() against whatever key and direction the registers happened to hold. As a result, once a second session is opened with a different key, every subsequent operation on the first session silently uses the second session's key and direction, and no error is reported. Because the key programming happened outside the lock, the correct usage pattern of "each thread does begin, then op, then free on its own session" also races: a second thread's cipher_begin_session() landing between the first thread's begin and its operation makes that operation run under the second thread's key. An attacker who can induce session creation on the device — for example a protocol peer whose connection causes a session key to be installed — can influence which key is resident when a victim operation runs. The impact is a cryptographic failure rather than memory corruption: data the application believed it was protecting under one key is encrypted or decrypted under another. Where the resident key is one the attacker knows or supplied, the affected plaintext becomes recoverable by that attacker, and the operation's direction (encrypt versus decrypt) can likewise be inverted. Exposure requires an application that holds two or more concurrent sessions with different keys against this driver; no in-tree Zephyr subsystem does so today (the 802.15.4 security layer, which does open two sessions, uses CCM mode, which this driver rejects), so the risk falls on application code that uses the documented multi-session API. The fix removes all hardware access from aes_begin_session() and reprograms the key and direction at the top of every operation, inside aes_lock, so the chip-global registers can no longer be observed stale by another session. | Oct 26, 2026 |
| CVE-2026-82389(opens NVD record) | Medium | 6.5 | In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed. The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer's SDP record requires no pairing, and the peer can also trigger the failure by dropping the ACL or racing an RFCOMM DLC on the same DLCI at the right moment. When the SDP client next advances its request list, sdp_client_discover() dereferences the zeroed parameters — net_buf_alloc(param->pool, …) with a NULL pool and param->uuid->type — and the result-notification paths call through the NULL params->func. Zeroing a linked node also truncates the request list behind a stale tail pointer, and re-arming the freed AG slot re-appends the same node and can produce a self-looping list that hangs the Bluetooth RX thread. The impact is a crash or hang of the Bluetooth stack; the written value is a constant zero at a fixed static address, so no attacker-controlled write is available. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_AG that use the Audio Gateway role are affected. | Oct 26, 2026 |
| CVE-2026-82388(opens NVD record) | Medium | 5.3 | bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation. The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, so a remote device advertising an HFP AG record with an RFCOMM channel outside 1-30 makes bt_rfcomm_dlc_connect() return -EINVAL and drives the local device into the wipe. The same branch is reached without any application misuse when the remote peer controls connection timing, for example when the RFCOMM session is in BT_RFCOMM_STATE_DISCONNECTING or the ACL is dropped between object creation and the RFCOMM call. Once the object has been wiped, the Bluetooth host continues to use it: sdp_client_alloc_buf() dereferences session->param->pool, which is now NULL, and the SDP receive paths call session->param->func() through a null function pointer, neither of which is NULL-checked. Because the wipe also clears hf->acl, the pool slot is considered free and a retry or an incoming HFP connection re-appends the same still-linked list node, turning session->reqs into a self-referential list that the host's list walkers never leave. The result is a fault or an unrecoverable hang in the Bluetooth host thread; the stray indirect call is through an all-zero pointer whose target the attacker does not control, so the practical impact is denial of service. The fix keeps the object allocated and marks it with a new BT_HFP_HF_FLAG_RELEASING flag, letting bt_hfp_hf_discover_cb() release it once the discovery completes instead of destroying it under the SDP client. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_HF enabled are affected. | Oct 26, 2026 |
| CVE-2026-81039(opens NVD record) | Medium | 4.3 | The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution. The undirected set's own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() — the only path that returns a reservation to the pool — is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected. | Oct 26, 2026 |
| CVE-2026-81038(opens NVD record) | High | 7.1 | The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path. On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations. | Oct 26, 2026 |
| CVE-2026-71456(opens NVD record) | Unscored | — | Use of hard-coded cryptographic key vulnerability in Johnson Controls Kantech Entrapass allows Padding Oracle Crypto Attack. This issue affects Kantech Entrapass: before 9.20. | Oct 26, 2026 |
| CVE-2026-71455(opens NVD record) | Unscored | — | Cleartext storage of sensitive information in memory vulnerability in Johnson Controls Kantech Entrapass allows Retrieve Embedded Sensitive Data. This issue affects Kantech Entrapass: before 9.20. | Oct 26, 2026 |
| CVE-2026-19742(opens NVD record) | Low | 3.7 | The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests entirely on it. Depending on the platform, sys_rand_get() resolves either to a hardware entropy device or, on boards whose entropy driver sets CONFIG_ENTROPY_NEEDS_PRNG, to the non-cryptographic xoshiro128++ generator in subsys/random/random_xoshiro128.c, which keeps a single global 128-bit state shared with every other sys_rand_get() consumer. Many of those consumers put their output directly on the wire (ephemeral source ports, DNS query IDs, CoAP message IDs and tokens, DHCPv6 transaction IDs, WebSocket masking keys), and the xoshiro state transition is invertible, so an observer of a device's traffic can recover the generator state and reconstruct the IID secret key. Additionally, with the entropy-device backend sys_rand_get() silently falls back to k_cycle_get_32() samples when the entropy driver fails, and returns no error, so the key could be derived from the cycle counter without the caller noticing. With the key known, stable IIDs become directly computable for any prefix (the remaining HMAC inputs — prefix, interface index, interface name, DAD counter — are guessable), and temporary IIDs become linkable after a cheap search over the mixed-in k_uptime_get_32() value. This defeats the properties both features exist to provide: an attacker can track a device across networks and prefixes, and can predict its address inside a /64 without scanning, removing the usual barrier to directly targeting the host. There is no memory-safety, integrity, or availability impact. The fix generates the key with sys_csrand_get() and aborts IID generation with -EIO when no cryptographic randomness is available, instead of silently deriving addresses from a predictable key. Both CONFIG_NET_IPV6_IID_STABLE and CONFIG_NET_IPV6_PE are experimental and disabled by default; builds using CONFIG_TEST_RANDOM_GENERATOR remain predictable by design, as sys_csrand_get() is deliberately routed back to the test generator there. | Oct 26, 2026 |
| CVE-2026-116612(opens NVD record) | High | 7.8 | A flaw was found in GStreamer Editing Services (gst-editing-services). A GES project file can embed an arbitrary GStreamer pipeline description as an effect definition. When such a file is loaded, either explicitly by an editing application or automatically by a media player or file-manager thumbnailing service that uses GStreamer autoplugging, the pipeline description is parsed and instantiated without restriction on which elements may be used or which properties may be set. A remote attacker who can deliver a crafted project file to a victim's system can trigger reading or writing of arbitrary local files, issue outbound network requests to attacker-controlled servers, or cause the application to crash. Under certain conditions the file-write capability may be leveraged to achieve code execution. | Oct 26, 2026 |
| CVE-2026-116596(opens NVD record) | Unscored | — | Pyrus Sync for Windows contains a local privilege escalation vulnerability caused by missing authorization controls in its PyrusSyncService Windows service, which allow an attacker with unprivileged access to create files using the ISyncService contract. | Oct 26, 2026 |
| CVE-2026-116403(opens NVD record) | Medium | 5.9 | Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Awesomemotive Easy Digital Downloads easy-digital-downloads allows Leveraging Race Conditions.This issue affects Easy Digital Downloads: from n/a through 3.7.1. | Oct 26, 2026 |
| CVE-2026-116396(opens NVD record) | Medium | 6.5 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in TMS Amelia ameliabooking allows Stored XSS.This issue affects Amelia: from n/a through 2.4.12. | Oct 26, 2026 |
| CVE-2026-116395(opens NVD record) | Medium | 6.5 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in bPlugins LightBox Block lightbox-block allows Stored XSS.This issue affects LightBox Block: from n/a through 1.2.0. | Oct 26, 2026 |
| CVE-2026-116388(opens NVD record) | Medium | 5.3 | Missing Authorization vulnerability in TMS Amelia ameliabooking allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Amelia: from n/a through 2.4.10. | Oct 26, 2026 |
| CVE-2026-116384(opens NVD record) | Medium | 6.3 | A weakness has been identified in Bdtask Garage 24 Garage Management Software 1.0. This vulnerability affects unknown code of the component Backend. Executing a manipulation can lead to improper authorization. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | Oct 26, 2026 |
| CVE-2026-116371(opens NVD record) | Medium | 6.3 | A weakness has been identified in Akuvox Akubela HyPanel PS51 51.130.40.26. The impacted element is an unknown function of the file /login. Executing a manipulation of the argument engrmode with the input admin can lead to improper authentication. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. | Oct 26, 2026 |
| CVE-2026-116370(opens NVD record) | Medium | 6.3 | A security flaw has been discovered in 2K Games Sid Meier's Civilization VI 1.0.12.68. The affected element is the function loadstring of the component Lua sandbox. Performing a manipulation results in type confusion. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure. | Oct 26, 2026 |
| CVE-2026-115913(opens NVD record) | Medium | 6.5 | vLLM is an inference and serving engine for large language models. Prior to 0.32.0, the Phi-4 multimodal audio encoder in phi4mm_audio.py and phi4mm_utils.py uses eager attention by default, allowing a remote client to submit one legal long audio clip that causes MultiHeadedAttention.forward_attention to materialize and retain full attention matrices in self.attn. The scaled dot-product attention branch does not materialize these matrices. The resulting quadratic GPU-memory use can cause an out-of-memory condition and terminate EngineCore for all users. This issue is fixed in version 0.32.0. | Oct 26, 2026 |
| CVE-2026-115912(opens NVD record) | High | 7.5 | vLLM is an inference and serving engine for large language models. Prior to 0.32.0, an authenticated caller can place forged shared-memory address and monotonic_id values in public multimodal features.kwargs_data. In scale-out deployments with shared-memory multimodal caching enabled, workers trust those values and pass attacker-selected bytes to pickle.loads(), allowing arbitrary Python execution even when insecure serialization is disabled. This issue is fixed in version 0.32.0. | Oct 26, 2026 |
| CVE-2026-115911(opens NVD record) | Medium | 6.5 | vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0. | Oct 26, 2026 |
| CVE-2026-115910(opens NVD record) | Medium | 6.8 | Python Social Auth is a social authentication and registration mechanism. Prior to 6.2.0, OpenIdConnectAuth in social_core/backends/open_id_connect.py uses get_and_store_nonce to place the OpenID Connect nonce in a shared OpenIdConnectAssociation table, and get_nonce and validate_claims verify only that the nonce exists and has not expired rather than binding it to the browser session and OAuth state that initiated the login. An attacker who obtains a victim's unused authorization code can start a separate login to obtain valid state for the attacker's browser, submit the victim's code with that state, and pass nonce validation because the victim nonce is globally available. With DEFAULT_USE_PKCE disabled in the default OpenIdConnectAuth configuration, the attacker can be logged in as the victim. This issue is fixed in version 6.2.0. | Oct 26, 2026 |
| CVE-2026-115909(opens NVD record) | High | 7.5 | zip is a zip library for Rust that supports reading and writing simple ZIP files. From 1.3.0 until 9.0.0, ZipArchive::extract in src/read/mod.rs calls Vec::with_capacity for a symbolic link target using the attacker-controlled ZIP64 uncompressed_size before reading entry data. A small archive can request an impossible capacity, causing the infallible allocation path to abort the process before the entry is validated. The failure cannot be contained with catch_unwind or a worker thread, allowing repeated denial of service in archive-processing applications. This issue is fixed in version 9.0.0. | Oct 26, 2026 |
| CVE-2026-115908(opens NVD record) | High | 7.4 | zip is a zip library for Rust that supports reading and writing simple ZIP files. From 7.2.0 until 9.0.0, ZipArchive::extract and ZipArchive::extract_unwrapped_root_dir use safe_prepare_path in src/read/zipfile.rs and simplified_components in src/path.rs to validate symbolic link targets with a lexical prefix comparison rather than resolving each intermediate link. An attacker who knows or can guess the absolute extraction destination can create a chain whose apparent target remains under the destination while an intermediate symlink resolves outside it, allowing attacker-controlled files to be created or overwritten with the extracting process's privileges. On Windows, discarded drive and UNC prefixes can permit a single-link escape when the process has SeCreateSymbolicLinkPrivilege, such as through administrator rights or Developer Mode. This regression is distinct from CVE-2025-29787. This issue is fixed in version 9.0.0. | Oct 26, 2026 |
| CVE-2026-115907(opens NVD record) | High | 7.5 | zip is a zip library for Rust that supports reading and writing simple ZIP files. From 5.1.0 until 9.0.0, applications built with the legacy-zip feature can reserve output capacity from an attacker-controlled ZIP64 uncompressed size before validating the compressed stream. The ShrinkDecoder path in src/legacy/shrink.rs can panic with a capacity overflow during ZipArchive::extract, and the Reduce and Implode decoders contain the same unbounded preallocation pattern. An unhandled panic can terminate an archive-processing service. This issue is fixed in version 9.0.0. | Oct 26, 2026 |
| CVE-2026-115906(opens NVD record) | Medium | 6.5 | zip is a zip library for Rust that supports reading and writing simple ZIP files. From 0.6.0 until 9.0.0, the AES entry reader in src/aes.rs verifies its HMAC only when the attacker-controlled data counter reaches zero. If the underlying bounded reader reaches the real end of the archive while data_remaining is still positive, or if an encrypted entry has no payload, the reader can return a clean end of stream without reading and comparing the authentication tag. Applications using by_index_decrypt, by_name_decrypt, by_path_decrypt, or password-enabled by_index_with_options can therefore accept modified plaintext without an authentication error. This issue is fixed in version 9.0.0. | Oct 26, 2026 |
| CVE-2026-115905(opens NVD record) | Unscored | — | zip is a zip library for Rust that supports reading and writing simple ZIP files. Through 9.0.4, ZipArchive treats Central Directory File Header filenames as authoritative while ZipStreamReader extracts using Local File Header filenames without reconciling the duplicate metadata in src/read/stream.rs. A crafted archive can therefore appear benign to a component that inspects the central directory but cause a streaming extractor to write a different attacker-selected path and content, potentially overwriting files used by a downstream service. This issue is fixed in version 9.0.5. | Oct 26, 2026 |
| CVE-2026-115598(opens NVD record) | Medium | 5.3 | Missing Authorization vulnerability in ThimPress LearnPress learnpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects LearnPress: from n/a through 4.4.11. | Oct 26, 2026 |
| CVE-2026-115597(opens NVD record) | Medium | 5.4 | Missing Authorization vulnerability in ThimPress LearnPress learnpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects LearnPress: from n/a through 4.4.11. | Oct 26, 2026 |
| CVE-2026-115418(opens NVD record) | High | 7.3 | SQL injection in the database-query custom resource handlers in the Amazon Web Services (AWS) Cloud Development Kit (CDK) @aws-cdk/aws-redshift-alpha module before 2.274.0-alpha.0 could allow a third party who can influence construct property values to run SQL statements with Amazon Redshift superuser privileges, including granting access to all cluster users. The statements are reachable through crafted user names, comments, or passwords. To remediate this issue, users should upgrade to version 2.274.0-alpha.0 or later and review existing table grants to PUBLIC. | Oct 26, 2026 |
| CVE-2026-114710(opens NVD record) | Medium | 6.5 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Chill Gallery PhotoBlocks photoblocks-grid-gallery allows Stored XSS.This issue affects Gallery PhotoBlocks: from n/a through 1.3.7. | Oct 26, 2026 |
| CVE-2026-107091(opens NVD record) | High | 7.8 | An issue in HUION Inspiroy Frego S (L310) Windows Driver 20.0.1.118 allows a local attacker to execute arbitrary code via the HUION driver installer DLL-loading logic | Oct 26, 2026 |
| CVE-2026-106677(opens NVD record) | High | 7.1 | Homestay3 homestay-backend 0.0.1-SNAPSHOT contains an IDOR in ChatServiceImpl. An authenticated user can view conversations, read messages, send messages, and mark messages as read for arbitrary conversation ids because the service does not verify that the caller is a conversation participant. | Oct 26, 2026 |
| CVE-2026-106676(opens NVD record) | Medium | 5.4 | qiujie mall-server 0.0.1-SNAPSHOT contains an integer overflow in CartServiceImpl that allows an authenticated user to wrap a cart quantity to a negative value. The order creation flow does not validate the resulting quantity and passes it to the stock update query, increasing inventory and creating negative-value orders. | Oct 26, 2026 |
| CVE-2013-10077(opens NVD record) | Medium | 5.3 | A weakness has been identified in OctoPrint 1.0.0. This impacts the function getSettings of the file src/octoprint/server/ajax/settings.py of the component API Key Handler. This manipulation causes information disclosure. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.1.0-rc1 will fix this issue. Patch name: eccc9d6fbde0c46cdd6e255fd5ce9a30077ba954. You should upgrade the affected component. Affected is a 2013 release where access control was not yet implemented and the endpoint was part of first-run setup). The API key has been admin-gated since 1.2.0 and GET /api/settings is protected by Permissions.SETTINGS_READ plus reauthentication in all current releases. | Oct 26, 2026 |
| CVE-2026-93846(opens NVD record) | Low | 3.8 | Mattermost versions 11.7.x <= 11.7.10 fail to restrict which built-in roles can be assigned to a team member via the API, which allows a team admin to grant a team member permissions beyond those permitted by the configured permission scheme via the {{update-team-member-roles}} REST API.. Mattermost Advisory ID: MMSA-2026-00734 | Oct 26, 2026 |
| CVE-2026-85297(opens NVD record) | Unscored | — | Bucket Squatting in Google Cloud Run MCP versions prior to 1.11.0 on Google Cloud Platform allows an attacker to intercept and access proprietary source code, execute arbitrary code and exfiltrate data. Users must upgrade to Cloud Run MCP version 1.11.0 or later. | Oct 26, 2026 |
| CVE-2026-65226(opens NVD record) | Unscored | — | Rejected reason: This CVE ID has been rejected by runZero as unused. | Oct 26, 2026 |
| CVE-2026-65222(opens NVD record) | Unscored | — | Rejected reason: The reported issue could not be reproduced, and the affected products are end-of-life. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65221(opens NVD record) | Unscored | — | Rejected reason: The reported issue was assessed as intended functionality. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65218(opens NVD record) | Unscored | — | Rejected reason: The reported issue is tracked under CVE-2026-18451. This CVE ID is rejected as a duplicate. | Oct 26, 2026 |
| CVE-2026-65217(opens NVD record) | Unscored | — | Rejected reason: The reported issue could not be reproduced. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65216(opens NVD record) | Unscored | — | Rejected reason: The reported issue is tracked under CVE-2026-18450. This CVE ID is rejected as a duplicate. | Oct 26, 2026 |
| CVE-2026-65215(opens NVD record) | Unscored | — | Rejected reason: The reported issue could not be reproduced. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65214(opens NVD record) | Unscored | — | Rejected reason: The reported issue is tracked under CVE-2026-18449. This CVE ID is rejected as a duplicate. | Oct 26, 2026 |
| CVE-2026-65212(opens NVD record) | Unscored | — | Rejected reason: The reported issue was assessed as intended functionality. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65203(opens NVD record) | Unscored | — | Rejected reason: The reported issue could not be reproduced. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-65202(opens NVD record) | Unscored | — | Rejected reason: The reported issue was assessed as intended functionality. This CVE ID is unused by the CNA. | Oct 26, 2026 |
| CVE-2026-116544(opens NVD record) | Low | 3.7 | Open5GS 2.6.1 through 2.8.0 contains an out-of-bounds read vulnerability in parse_scheme_output() in lib/sbi/conv.c during SUCI de-concealment due to incomplete length validation. Remote unauthenticated UEs or SBI peers can submit a crafted SUCI with a 42-byte scheme output to a UDM, triggering a heap over-read past the buffer. | Oct 26, 2026 |
| CVE-2026-116543(opens NVD record) | High | 7.5 | Open5GS 1.3.0 through 2.8.0 contains a heap out-of-bounds write vulnerability in parse_multipart() that allows unauthenticated attackers to corrupt memory by supplying an empty multipart boundary. Attackers can send a single crafted multipart/related request to the SBI interface of any network function, overflowing the lookbehind buffer and crashing it. | Oct 26, 2026 |
| CVE-2026-116542(opens NVD record) | Medium | 5.3 | Netty netty-tcnative before 2.0.84.Final contains an SNI hostname spoofing vulnerability that allows remote unauthenticated clients to alter hostnames via JNI NewStringUTF decoding. Attackers can send overlong encodings like 0xC0 0x80 in the ClientHello server_name to confuse SNI-based certificate selection, access decisions, and logging. | Oct 26, 2026 |