Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
8,641 matching · page 36/173Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-52913(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: stop OGMv2 on disabled interface When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called. | Jun 24, 2026 |
| CVE-2026-52912(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: hold bridge skb->dev while queued br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. | Jun 24, 2026 |
| CVE-2026-9073(opens NVD record) | Medium | 6.2 | A flaw was found in foreman-mcp-server. This component utilizes two distinct logging mechanisms that can expose sensitive session and authentication data. One mechanism logs session identifiers, which are treated as authentication credentials, at an informational level. The other, when debug logging is enabled, incompletely sanitizes HTTP request headers, leading to the cleartext logging of sensitive information such as authorization tokens and API keys. This vulnerability can result in a confidentiality breach, as sensitive authentication data is persisted in plain text within container logs, increasing the risk if logs are forwarded to a centralized platform. | Jun 23, 2026 |
| CVE-2026-54513(opens NVD record) | High | 8.1 | jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, BasicPolymorphicTypeValidator.Builder.allowIfSubTypeIsArray() allowlists any array type based only on clazz.isArray(), without validating the array's component (element) type against the configured allowlist. A PTV built with allowIfSubTypeIsArray() plus an explicit concrete-type allowlist therefore still permits EvilType[] even though EvilType is not allowlisted. When Jackson deserializes the elements and no per-element type IDs are present, it instantiates the component type directly with no further PTV check, bypassing the allowlist. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4. | Jun 23, 2026 |
| CVE-2026-12892(opens NVD record) | Medium | 4.4 | A flaw was found in GStreamer's gst-plugins-bad package. When processing a specially crafted H.264 video file containing malformed MVC or SVC extension slice NAL units, a 1-byte heap out-of-bounds read can occur during parsing. This happens when the parser attempts to check slice boundary information without first verifying that the NAL unit contains enough data beyond the extension header. An attacker could exploit this by tricking a user into opening a malicious H.264 video file, potentially causing the application to crash or leak a single byte of heap memory. | Jun 23, 2026 |
| CVE-2026-12891(opens NVD record) | Medium | 4.3 | A flaw was found in the GStreamer gst-plugins-bad package. When processing a malformed H.266/VVC video stream with a crafted aspect ratio indicator value, the H.266 parser performs an out-of-bounds read of up to 8 bytes from adjacent memory. This flaw allows an attacker to craft a malicious H.266 video file or stream that, when processed by a GStreamer-based application, could leak limited memory contents through video metadata, potentially exposing sensitive information from the application's address space. | Jun 23, 2026 |
| CVE-2026-12112(opens NVD record) | High | 7.8 | A flaw was found in the foreman-mcp-server. A session management vulnerability in the MCP Server allows unauthenticated attackers to hijack active administrative sessions due to an improper cache of authenticated client connections, by trusting a non-secret session ID without re-validating authentication tokens and by logging all newly created session IDs to standard logs. This issue can result in privilege escalation and infrastructure-wide code execution. | Jun 23, 2026 |
| CVE-2026-11820(opens NVD record) | Medium | 6.5 | A flaw was found in the community.general Ansible collection's nexmo module. The module constructs HTTP requests to the Vonage/Nexmo SMS API by encoding API credentials (api_key and api_secret) into URL query parameters and sending them via GET requests. This causes credentials to be exposed in web server access logs, proxy logs, HTTP Referer headers, and network monitoring tools, despite the Ansible argument specification marking these parameters as no_log. An attacker with access to any of these logging or monitoring points can obtain the full API credentials and gain unauthorized access to the victim's Vonage/Nexmo account. | Jun 23, 2026 |
| CVE-2026-11819(opens NVD record) | Medium | 5.5 | Module: plugins/modules/keyring_info.py CVSS 3.1: 5.5 MEDIUM — AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N Issue: The module retrieves a passphrase from the OS native keyring (GNOME Keyring, macOS Keychain, Windows Credential Manager) and places it directly into result["passphrase"] with no output suppression, no no_log protection, and no documentation warning. Root Cause: Line 105 (protected): keyring_password=dict(type="str", required=True, no_log=True) Line 127 (NOT protected): result["passphrase"] = passphrase Observed Output: { "changed": false, "passphrase": "MyMasterP@ssw0rd!SSH_Key_Secret" } Visible via register + debug: { "keyring_result": { "changed": false, "passphrase": "MyMasterP@ssw0rd!SSH_Key_Secret" } } Impact: Master passwords, SSH key passphrases and service credentials appear in all Ansible output register: keyring_result followed by debug: var=keyring_result prints passphrase in full Ansible fact caching backends (Redis, JSON file, memcached) may persist the passphrase AWX/Tower job logs silently store the live credential Fix: module.exit_json(changed=False, passphrase=passphrase, _ansible_no_log=True) Also add a documentation warning requiring callers to use no_log: true at the task level. PoCs Fig 1: PoC execution showing passphrase in plaintext output Fig 2: Source code showing no_log=True on input (line 105) vs unprotected output (line 127) | Jun 23, 2026 |
| CVE-2026-52844(opens NVD record) | High | 7.5 | Caddy is an extensible server platform that uses TLS by default. Prior to 2.11.4, on Windows, Caddy path matchers treat /private\secret.txt as outside /private/*, but file_server later resolves the same request path as private\secret.txt on disk. An unauthenticated remote client can bypass Caddy path-scoped auth/deny routes protecting /private/*. This vulnerability is fixed in 2.11.4. | Jun 23, 2026 |
| CVE-2026-49402(opens NVD record) | High | 8.1 | Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.7.10, Deno's node:child_process implementation provided an escapeShellArg() helper used when callers passed shell: true to spawn / spawnSync / exec and friends. On Windows, the helper failed to quote arguments that contained cmd.exe metacharacters and did not neutralize % (which cmd.exe expands even inside double-quoted strings). An attacker who controlled any portion of an argument passed to such a call could inject arbitrary additional commands into the spawned cmd.exe invocation. This vulnerability is fixed in 2.7.10. | Jun 23, 2026 |
| CVE-2020-9713(opens NVD record) | Medium | 5.5 | Adobe Acrobat and Reader versions 2020.009.20074 and earlier, 2020.001.30002, 2017.011.30171 and earlier, and 2015.006.30523 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | Jun 23, 2026 |
| CVE-2020-9711(opens NVD record) | Medium | 5.5 | Acrobat Reader versions 2020.009.20074, 2020.001.30002, 2017.011.30171, 2015.006.30523 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | Jun 23, 2026 |
| CVE-2020-9695(opens NVD record) | High | 7.8 | Acrobat Reader versions 2020.009.20074, 2020.001.30002, 2017.011.30171, 2015.006.30523 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | Jun 23, 2026 |
| CVE-2026-55255(opens NVD record) | High | 8.4 | Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.1, an Insecure Direct Object Reference (IDOR) vulnerability in /api/v1/responses endpoint allows an authenticated attacker to execute any flow belonging to another user by specifying the victim's flow ID in the request. This vulnerability is fixed in 1.9.1. | Jun 23, 2026 |
| CVE-2026-52673(opens NVD record) | Medium | 6.5 | SQL Injection vulnerability in Cboard v.0.4.2 and before allows a remote attacker to execute arbitrary code via the getDimensionsValues component | Jun 23, 2026 |
| CVE-2026-12969(opens NVD record) | Medium | 5.3 | An out-of-bounds read vulnerability exists in dnsmasq's find_soa() function in src/rfc1035.c. When parsing NS section records, extract_name() is called with extrabytes=0, failing to validate that 10 additional bytes exist for fixed-length DNS record fields. A remote attacker controlling a DNS zone can exploit this via a crafted NXDOMAIN response to cause a 10-byte heap out-of-bounds read, potentially accessing stale data from prior transactions. | Jun 23, 2026 |
| CVE-2026-10609(opens NVD record) | Medium | 6.8 | A missing authorization flaw was found in the OpenShift Cluster Logging Operator. The operator creates and forwards ServiceAccount tokens to output destinations without verifying that the ClusterLogForwarder creator has permission to use those credentials, allowing a delegated editor to exfiltrate SA tokens and escalate privileges. | Jun 23, 2026 |
| CVE-2023-54365(opens NVD record) | High | 7.5 | Traefik before 2.10.5 and 3.0.0-beta4 is affected by a denial-of-service vulnerability in HTTP/2 request handling inherited from the Go standard library's HTTP/2 implementation (CVE-2023-44487 / CVE-2023-39325, the 'Rapid Reset' technique). A remote attacker can rapidly create and cancel HTTP/2 streams to exhaust server resources and cause service unavailability. | Jun 23, 2026 |
| CVE-2026-12866(opens NVD record) | Critical | 9.8 | All versions of the package expr-eval are vulnerable to Code Execution via the toJSFunction() API. An attacker can execute arbitrary JavaScript by supplying crafted expressions that are compiled into native code using new Function(). Because user-controlled expressions are transformed directly into executable JavaScript, attackers can escape the intended expression sandbox and run arbitrary code within the application's context. | Jun 23, 2026 |
| CVE-2026-55655(opens NVD record) | Medium | 5.0 | A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session. | Jun 23, 2026 |
| CVE-2026-55654(opens NVD record) | Low | 3.7 | A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. | Jun 23, 2026 |
| CVE-2026-55653(opens NVD record) | Medium | 4.3 | A flaw was found in OpenSSH. A malicious SSH server can exploit a double free vulnerability in the Diffie-Hellman Group Exchange (DH-GEX) client path. This occurs during FIPS (Federal Information Processing Standards) mode known-group validation when the client processes attacker-controlled DH-GEX group parameters. Successful exploitation leads to client-side process termination, resulting in a Denial of Service (DoS). | Jun 23, 2026 |
| CVE-2026-10658(opens NVD record) | High | 7.1 | A missing length validation in the Zephyr Bluetooth Host ISO receive path can be triggered by malformed HCI ISO data. In bt_iso_recv() (subsys/bluetooth/host/iso.c), when processing PB=START/SINGLE fragments, the code pulls a TS SDU header (8 bytes, ts=1) or a non-TS SDU header (4 bytes, ts=0) without first verifying that buf->len contains at least that many bytes. The outer HCI ISO length check in hci_iso() validates payload length consistency but not the minimum inner SDU header size, so a packet with payload length 1 passes hci_iso() and then reaches net_buf_pull_mem(), which asserts buf->len >= len. As a result, malformed ISO traffic deterministically triggers a kernel assert (denial of service) in assert-enabled builds, and in non-assert builds the same path may proceed with an undersized buffer, leading to out-of-bounds read behavior. The issue affects products using the Zephyr Host with CONFIG_BT_ISO_RX enabled, particularly where incoming HCI data can be influenced by a malicious or compromised controller or malformed forwarded ISO traffic. | Jun 23, 2026 |
| CVE-2026-10651(opens NVD record) | High | 7.1 | A malformed Bluetooth Classic SDP attribute can trigger a reachable assertion in Zephyr's SDP parser. In subsys/bluetooth/host/classic/sdp.c, bt_sdp_parse_attribute() accepts an input buffer once it contains the 1-byte attribute type and 2-byte attribute id, but then unconditionally pulls an additional byte for the value type without verifying that the byte is present. A truncated 3-byte attribute (for example 09 00 09) therefore reaches net_buf_simple_pull() with insufficient remaining length, triggering the __ASSERT_NO_MSG(buf->len >= len) check and a kernel panic in assert-enabled builds (denial of service). In builds where assertions are disabled, parsing may continue past the end of the available buffer, leading to an out-of-bounds read and undefined behavior. | Jun 23, 2026 |
| CVE-2026-10645(opens NVD record) | Medium | 4.9 | Zephyr's ext2 directory-entry parser does not fully validate on-disk directory entry structure before copying the entry name and advancing traversal state. In ext2_fetch_direntry() (subsys/fs/ext2/ext2_diskops.c), the code only checks de_name_len <= EXT2_MAX_FILE_NAME and then copies the name with memcpy without validating the structural relationship between de_rec_len, de_name_len, and the directory block boundary (for example that de_rec_len is non-zero, at least the size of the entry header, and that the record fits within the block). Callers such as find_dir_entry() and ext2_get_direntry() (subsys/fs/ext2/ext2_impl.c) then advance traversal using the unvalidated de_rec_len. A crafted ext2 image can therefore cause an out-of-bounds read from the directory block buffer when a malformed entry near the end of a block triggers an oversized name copy, or a zero-progress infinite loop when de_rec_len == 0. The issue is not reached at mount time but later through directory traversal paths such as pathname lookup, stat/open/unlink/rename, and readdir. The primary impact is denial of service and out-of-bounds reads under attacker-controlled ext2 images mounted from untrusted media. | Jun 23, 2026 |
| CVE-2026-48746(opens NVD record) | Critical | 9.1 | vLLM is an inference and serving engine for large language models (LLMs). From 0.3.0 until 0.22.0, a vulnerability in ASGI web servers and starlette's trust on those web servers enables an authentication bypass of the OpenAI API AuthenticationMiddleware. It allows to use the API without providing the configured VLLM_API_KEY or --api-key. This vulnerability is fixed in 0.22.0. | Jun 22, 2026 |
| CVE-2026-41523(opens NVD record) | High | 7.5 | vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, an assert-based security check in vLLM's activation function loading allows any unauthenticated attacker to achieve arbitrary code execution on the server by publishing a malicious HuggingFace model, when vLLM runs in Python optimized mode (python -O or PYTHONOPTIMIZE=1). This vulnerability is fixed in 0.22.0. | Jun 22, 2026 |
| CVE-2026-49468(opens NVD record) | Critical | 9.8 | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.84.0, a Host-header parsing flaw in the LiteLLM proxy could, under specific conditions, allow unauthenticated access to protected management routes. The auth layer derived the effective route from request.url.path in litellm/proxy/auth/auth_utils.py::get_request_route(), which Starlette reconstructs from the Host header. A crafted Host could therefore make the auth gate evaluate a different route from the one FastAPI dispatched. This vulnerability is fixed in 1.84.0. | Jun 22, 2026 |
| CVE-2026-44274(opens NVD record) | High | 7.8 | Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Link Resolution Before File Access vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access. | Jun 22, 2026 |
| CVE-2026-44273(opens NVD record) | Medium | 6.0 | Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain a Use of Default Credentials vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. | Jun 22, 2026 |
| CVE-2026-44272(opens NVD record) | High | 8.8 | Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | Jun 22, 2026 |
| CVE-2026-44271(opens NVD record) | High | 8.1 | Dell Wyse Management Suite (WMS), versions prior to WMS 2605, contain an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | Jun 22, 2026 |
| CVE-2026-10852(opens NVD record) | Medium | 5.9 | IBM WebSphere Application Server and IBM WebSphere Application Server Liberty are vulnerable to denial of service in the WebSphere WebServer Plug-in component when an attacker can pass crafted requests to the web server. | Jun 22, 2026 |
| CVE-2026-53571(opens NVD record) | High | 7.5 | Vite is a frontend tooling framework for JavaScript. Prior to 8.0.16, 7.3.5, and 6.4.3, the contents of files that are specified by server.fs.deny can be returned to the browser on Windows. Vite’s dev server denies direct access to sensitive files through server.fs.deny, including entries such as .env, .env.*, and *.{crt,pem}. However, on Windows, the deny logic does not correctly normalize NTFS ADS path forms before access checks are applied. Because of this, requests such as /.env::$DATA?raw are treated as allowed paths, while Windows resolves them to the original file's default data stream. Similar to that, Windows allows accessing a file using a different name with the 8.3 short name compatibility feature. Vite did not reject accessing files via them. This vulnerability is fixed in 8.0.16, 7.3.5, and 6.4.3. | Jun 22, 2026 |
| CVE-2026-50556(opens NVD record) | Medium | 6.1 | Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.0-rc.2, 21.2.16, 20.3.24, and 19.2.25, a Cross-Site Scripting (XSS) vulnerability exists in @angular/platform-server's DOM emulation dependency (domino) when serializing the content of <noscript> elements. When rendering dynamic text content inside a <noscript> element via template bindings (such as {{ value }} or [textContent]), the template engine expects the browser to render the content safely. Under Server-Side Rendering (SSR), domino is configured with scripting enabled, meaning <noscript> is treated as a raw-text element. However, domino's serializer completely omitted <noscript> from the list of raw-text elements requiring closing-tag escaping during DOM serialization. As a result, any occurrence of </noscript> in the bound dynamic text was never escaped under any circumstances. The unescaped closing tag was serialized directly into the output HTML (e.g. <noscript></noscript><script>alert(1)</script></noscript>). When parsed by a browser, it closes the <noscript> block early, allowing the injected <script> block to execute in the user's browser context, causing same-origin Cross-Site Scripting (XSS). This vulnerability is fixed in 22.0.0-rc.2, 21.2.16, 20.3.24, and 19.2.25. | Jun 22, 2026 |
| CVE-2026-9610(opens NVD record) | Low | 2.3 | IBM Datacap 9.1.7, 9.1.8, and 9.1.9 and IBM Datacap Navigator 9.1.7, 9.1.8, and 9.1.9 exposes resources or functionality that isn't linked in the UI but is accessible by directly requesting the URL, bypassing intended access controls. | Jun 22, 2026 |
| CVE-2026-9320(opens NVD record) | Medium | 5.9 | IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. | Jun 22, 2026 |
| CVE-2026-9072(opens NVD record) | High | 8.1 | IBM WebSphere Application Server and IBM WebSphere Application Server Liberty - when using Intelligent Management with the WebSphere WebServer Plug-in component - are vulnerable to remote code execution and denial of service. This vulnerability can be exploited when an attacker impersonates backend servers and sends crafted responses to the plug-in. | Jun 22, 2026 |
| CVE-2026-9071(opens NVD record) | High | 7.5 | IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. | Jun 22, 2026 |
| CVE-2026-9006(opens NVD record) | High | 7.4 | IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to server-side request forgery (SSRF) with the Ajax Proxy configured. This may allow an attacker to send unauthorized requests from the system, resulting in a security bypass or information disclosure. | Jun 22, 2026 |
| CVE-2026-8858(opens NVD record) | High | 7.5 | IBM WebSphere Application Server and IBM WebSphere Application Server Liberty are vulnerable to remote code execution and denial of service in the WebSphere Web Server Plug-in component. This vulnerability can be exploited when an attacker impersonates the application server and sends crafted responses to the plug-in. | Jun 22, 2026 |
| CVE-2026-8646(opens NVD record) | High | 7.4 | IBM WebSphere Application Server 9.0 and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to HTTP request smuggling. A remote attacker could smuggle a specially crafted request to the application server thereby allowing the attacker to bypass security controls, spoof identity, escalate privilege, and expose sensitive information. | Jun 22, 2026 |
| CVE-2026-8636(opens NVD record) | Medium | 5.5 | IBM Datacap 9.1.7, 9.1.8, and 9.1.9 and IBM Datacap Navigator 9.1.7, 9.1.8, and 9.1.9 allows an attacker to retrieve user passwords and cryptographic keys from memory. Attacker can use the same keys to decrypt password, gain access to the application and access sensitive data in the database. | Jun 22, 2026 |
| CVE-2026-8059(opens NVD record) | Medium | 6.1 | IBM Datacap 9.1.7, 9.1.8, and 9.1.9 and IBM Datacap Navigator 9.1.7, 9.1.8, and 9.1.9 is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | Jun 22, 2026 |
| CVE-2026-7253(opens NVD record) | Medium | 5.3 | IBM Watson Speech Services Cartridge is vulnerable to Server-Side Request Forgery (SSRF) in Sterling File Gateway, due to a flaw which may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks [GHSA-rr7j-v2q5-chgv] [CVE-2026-7253]. IBM Sterling File Gateway is used in our speech runtimes. This vulnerabilitiy has been addressed. Please read the details for remediation below. | Jun 22, 2026 |
| CVE-2026-41049(opens NVD record) | High | 7.1 | Incorrect caching of authentication between different users of the qSnapper dbus service before version 1.3.3 allowed any local attacker to use dbus functions after a privileged users has authenticated for them. | Jun 22, 2026 |
| CVE-2026-41048(opens NVD record) | High | 7.1 | Incorrect caching of authentication between different polkit methods in qSnapper before version 1.3.3 allowed a local attacker to use functions like "restore from snapshot" even if only allowed to do "delete snapshot". | Jun 22, 2026 |
| CVE-2026-41047(opens NVD record) | Medium | 5.5 | Lack of authentication when using the "snapshot diff" functions in qSnapper before version 1.3.3 allowed a local attacker to see otherwise read protected information. | Jun 22, 2026 |
| CVE-2026-12725(opens NVD record) | Medium | 5.9 | A heap-based buffer overflow was found in dnsmasq. When DNSSEC validation and query logging are both enabled, logging of DS or DNSKEY replies containing unsupported algorithm or digest types can cause dnsmasq to write past the end of an internal logging buffer. A remote attacker able to supply such a DNS response may crash the dnsmasq process, resulting in denial of service. | Jun 22, 2026 |