Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
50,955 matching · page 479/1020Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2025-60007(opens NVD record) | Medium | 5.5 | A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS). When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from. This issue affects: Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2. | Jan 15, 2026 |
| CVE-2025-60003(opens NVD record) | High | 7.5 | A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer. This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring: [ protocols bgp ... disable-4byte-as ] Established BGP sessions can be checked by executing: show bgp neighbor <IP address> | match "4 byte AS" This issue affects: Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO. | Jan 15, 2026 |
| CVE-2025-59961(opens NVD record) | Medium | 5.5 | An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource. This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay. This issue affects: Junos OS: * all versions before 21.2R3-S10, * all versions of 22.2, * from 21.4 before 21.4R3-S12, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S2, * from 24.4 before 24.4R2, * from 25.2 before 25.2R1-S1, 25.2R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-S2-EVO, * from 24.4 before 24.4R2-EVO, * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. | Jan 15, 2026 |
| CVE-2025-59960(opens NVD record) | High | 7.4 | An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server. By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion. This issue affects Junos OS: * all versions before 21.2R3-S10, * from 21.4 before 21.4R3-S12, * all versions of 22.2, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S2, * from 24.4 before 24.4R2, * from 25.2 before 25.2R1-S1, 25.2R2. Junos OS Evolved: * all versions before 21.4R3-S12-EVO, * all versions of 22.2-EVO, * from 22.4 before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-S2-EVO, * from 24.4 before 24.4R2-EVO, * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO. | Jan 15, 2026 |
| CVE-2025-59959(opens NVD record) | Medium | 5.5 | An Untrusted Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial-of-Service (DoS). When the command 'show route < ( receive-protocol | advertising-protocol ) bgp > detail' is executed, and at least one of the routes in the intended output has specific attributes, this will cause an rpd crash and restart. 'show route ... extensive' is not affected. This issue affects: Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO. | Jan 15, 2026 |
| CVE-2025-52987(opens NVD record) | Medium | 6.1 | A clickjacking vulnerability exists in the web portal of Juniper Networks Paragon Automation (Pathfinder, Planner, Insights) due to the application's failure to set appropriate X-Frame-Options and X-Content-Type HTTP headers. This vulnerability allows an attacker to trick users into interacting with the interface under the attacker's control. This issue affects all versions of Paragon Automation (Pathfinder, Planner, Insights) before 24.1.1. | Jan 15, 2026 |
| CVE-2026-22775(opens NVD record) | High | 7.5 | Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.1.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the ArrayBuffer hydration expecting base64 encoded strings as input, but not checking the assumption before decoding the input. This vulnerability is fixed in 5.6.2. | Jan 15, 2026 |
| CVE-2026-22774(opens NVD record) | High | 7.5 | Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.3.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the typed array hydration expecting an ArrayBuffer as input, but not checking the assumption before creating the typed array. This vulnerability is fixed in 5.6.2. | Jan 15, 2026 |
| CVE-2026-0227(opens NVD record) | High | 7.5 | A vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to cause a denial of service (DoS) to the firewall. Repeated attempts to trigger this issue results in the firewall entering into maintenance mode. | Jan 15, 2026 |
| CVE-2026-20076(opens NVD record) | Medium | 4.8 | A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. | Jan 15, 2026 |
| CVE-2026-20075(opens NVD record) | Medium | 4.8 | A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials. | Jan 15, 2026 |
| CVE-2026-20047(opens NVD record) | Medium | 4.8 | A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. | Jan 15, 2026 |
| CVE-2025-67246(opens NVD record) | High | 7.3 | A local information disclosure vulnerability exists in the Ludashi driver before 5.1025 due to a lack of access control in the IOCTL handler. This driver exposes a device interface accessible to a normal user and handles attacker-controlled structures containing the lower 4GB of physical addresses. The handler maps arbitrary physical memory via MmMapIoSpace and copies data back to user mode without verifying the caller's privileges or the target address range. This allows unprivileged users to read arbitrary physical memory, potentially exposing kernel data structures, kernel pointers, security tokens, and other sensitive information. This vulnerability can be further exploited to bypass the Kernel Address Space Layout Rules (KASLR) and achieve local privilege escalation. | Jan 15, 2026 |
| CVE-2026-0992(opens NVD record) | Low | 2.9 | A flaw was found in the libxml2 library. This uncontrolled resource consumption vulnerability occurs when processing XML catalogs that contain repeated <nextCatalog> elements pointing to the same downstream catalog. A remote attacker can exploit this by supplying crafted catalogs, causing the parser to redundantly traverse catalog chains. This leads to excessive CPU consumption and degrades application availability, resulting in a denial-of-service condition. | Jan 15, 2026 |
| CVE-2026-0990(opens NVD record) | Medium | 5.9 | A flaw was found in libxml2, an XML parsing library. This uncontrolled recursion vulnerability occurs in the xmlCatalogXMLResolveURI function when an XML catalog contains a delegate URI entry that references itself. A remote attacker could exploit this configuration-dependent issue by providing a specially crafted XML catalog, leading to infinite recursion and call stack exhaustion. This ultimately results in a segmentation fault, causing a Denial of Service (DoS) by crashing affected applications. | Jan 15, 2026 |
| CVE-2026-0989(opens NVD record) | Low | 3.7 | A flaw was identified in the RelaxNG parser of libxml2 related to how external schema inclusions are handled. The parser does not enforce a limit on inclusion depth when resolving nested <include> directives. Specially crafted or overly complex schemas can cause excessive recursion during parsing. This may lead to stack exhaustion and application crashes, creating a denial-of-service risk. | Jan 15, 2026 |
| CVE-2026-0897(opens NVD record) | High | 7.5 | Allocation of Resources Without Limits or Throttling in the HDF5 weight loading component in Google Keras 3.0.0 through 3.13.0 on all platforms allows a remote attacker to cause a Denial of Service (DoS) through memory exhaustion and a crash of the Python interpreter via a crafted .keras archive containing a valid model.weights.h5 file whose dataset declares an extremely large shape. | Jan 15, 2026 |
| CVE-2026-0976(opens NVD record) | Low | 3.7 | A flaw was found in Keycloak. This improper input validation vulnerability occurs because Keycloak accepts RFC-compliant matrix parameters in URL path segments, while common reverse proxy configurations may ignore or mishandle them. A remote attacker can craft requests to mask path segments, potentially bypassing proxy-level path filtering. This could expose administrative or sensitive endpoints that operators believe are not externally reachable. | Jan 15, 2026 |
| CVE-2026-23512(opens NVD record) | High | 8.6 | SumatraPDF is a multi-format reader for Windows. In 3.5.2 and earlier, there is a Untrusted Search Path vulnerability when Advanced Options setting is trigger. The application executes notepad.exe without specifying an absolute path when using the Advanced Options setting. On Windows, this allows execution of a malicious notepad.exe placed in the application's installation directory, leading to arbitrary code execution. | Jan 14, 2026 |
| CVE-2025-71166(opens NVD record) | Medium | 5.4 | Typesetter CMS versions up to and including 5.1 contain a reflected cross-site scripting (XSS) vulnerability in the administrative interface within the Tools Status move message handling. The path parameter is reflected into the HTML output without proper output encoding in include/admin/Tools/Status.php. An authenticated attacker can supply crafted input containing HTML or JavaScript, resulting in arbitrary script execution in the context of an authenticated user's browser session. | Jan 14, 2026 |
| CVE-2025-71165(opens NVD record) | Medium | 5.4 | Typesetter CMS versions up to and including 5.1 contain a reflected cross-site scripting (XSS) vulnerability in the administrative interface within the Tools Status functionality. The path parameter is reflected into the HTML response without proper output encoding in include/admin/Tools/Status.php. An authenticated attacker can supply crafted input containing HTML or JavaScript, resulting in arbitrary script execution in the context of an authenticated user's browser session. | Jan 14, 2026 |
| CVE-2025-71164(opens NVD record) | Medium | 5.4 | Typesetter CMS versions up to and including 5.1 contain a reflected cross-site scripting (XSS) vulnerability in the Editing component. The images parameter (submitted as images[] in a POST request) is reflected into an HTML href attribute without proper context-aware output encoding in include/tool/Editing.php. An authenticated attacker with editing privileges can supply a JavaScript pseudo-protocol (e.g., javascript:) to trigger arbitrary JavaScript execution in the context of the victim's browser session. | Jan 14, 2026 |
| CVE-2025-33206(opens NVD record) | High | 7.8 | NVIDIA NSIGHT Graphics for Linux contains a vulnerability where an attacker could cause command injection. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, and denial of service. | Jan 14, 2026 |
| CVE-2026-22859(opens NVD record) | Critical | 9.1 | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1. | Jan 14, 2026 |
| CVE-2026-22858(opens NVD record) | Critical | 9.1 | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, global-buffer-overflow was observed in FreeRDP's Base64 decoding path. The root cause appears to be implementation-defined char signedness: on Arm/AArch64 builds, plain char is treated as unsigned, so the guard c <= 0 can be optimized into a simple c != 0 check. As a result, non-ASCII bytes (e.g., 0x80-0xFF) may bypass the intended range restriction and be used as an index into a global lookup table, causing out-of-bounds access. This vulnerability is fixed in 3.20.1. | Jan 14, 2026 |
| CVE-2026-22855(opens NVD record) | Critical | 9.1 | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a heap out-of-bounds read occurs in the smartcard SetAttrib path when cbAttrLen does not match the actual NDR buffer length. This vulnerability is fixed in 3.20.1. | Jan 14, 2026 |
| CVE-2026-22853(opens NVD record) | Critical | 9.8 | FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, RDPEAR’s NDR array reader does not perform bounds checking on the on‑wire element count and can write past the heap buffer allocated from hints, causing a heap buffer overflow in ndr_read_uint8Array. This vulnerability is fixed in 3.20.1. | Jan 14, 2026 |
| CVE-2025-65397(opens NVD record) | Medium | 6.8 | An insecure authentication mechanism in the safe_exec.sh startup script of Blurams Flare Camera version 24.1114.151.929 and earlier allows an attacker with physical access to the device to execute arbitrary commands with root privileges, if file /opt/images/public_key.der is not present in the file system. The vulnerability can be triggered by providing a maliciously crafted auth.ini file on the device's SD card. | Jan 14, 2026 |
| CVE-2025-67835(opens NVD record) | Medium | 6.5 | Paessler PRTG Network Monitor before 25.4.114 allows Denial-of-Service (DoS) by an authenticated attacker via the Notification Contacts functionality. | Jan 14, 2026 |
| CVE-2025-67834(opens NVD record) | Medium | 5.4 | Paessler PRTG Network Monitor before 25.4.114 allows XSS by an unauthenticated attacker via the filter parameter. | Jan 14, 2026 |
| CVE-2025-67833(opens NVD record) | Medium | 6.1 | Paessler PRTG Network Monitor before 25.4.114 allows XSS by an unauthenticated attacker via the tag parameter. | Jan 14, 2026 |
| CVE-2025-65396(opens NVD record) | Medium | 6.1 | A vulnerability in the boot process of Blurams Flare Camera version 24.1114.151.929 and earlier allows a physically proximate attacker to hijack the boot mechanism and gain a bootloader shell via the UART interface. This is achieved by inducing a read error from the SPI flash memory during the boot, by shorting a data pin of the IC to ground. An attacker can then dump the entire firmware, leading to the disclosure of sensitive information including cryptographic keys and user configurations. | Jan 14, 2026 |
| CVE-2025-37185(opens NVD record) | Medium | 5.5 | Vulnerabilities in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker to conduct a stored cross-site scripting (XSS) attacks against an administrative user of the interface. A successful exploit allows an attacker to execute arbitrary script code in a victim's browser in the context of the affected interface and thereby make unauthorized arbitrary configuration changes to the host. | Jan 14, 2026 |
| CVE-2025-37184(opens NVD record) | Critical | 9.8 | A vulnerability exists in an Orchestrator service that could allow an unauthenticated remote attacker to bypass multi-factor authentication requirements. Successful exploitation could allow an attacker to create an admin user account without the necessary multi-factor authentication, thereby compromising the integrity of secured access to the system. | Jan 14, 2026 |
| CVE-2025-37183(opens NVD record) | High | 7.2 | Vulnerabilities in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker to perform SQL injection attacks. Successful exploitation could allow an attacker to execute arbitrary SQL commands on the underlying database, potentially leading to unauthorized data access or data manipulation. | Jan 14, 2026 |
| CVE-2025-37182(opens NVD record) | High | 7.2 | Vulnerabilities in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker to perform SQL injection attacks. Successful exploitation could allow an attacker to execute arbitrary SQL commands on the underlying database, potentially leading to unauthorized data access or data manipulation. | Jan 14, 2026 |
| CVE-2025-37181(opens NVD record) | High | 7.2 | Vulnerabilities in the web-based management interface of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker to perform SQL injection attacks. Successful exploitation could allow an attacker to execute arbitrary SQL commands on the underlying database, potentially leading to unauthorized data access or data manipulation. | Jan 14, 2026 |
| CVE-2026-22211(opens NVD record) | Unscored | — | TinyOS versions up to and including 2.1.2 contain a global buffer overflow vulnerability in the printfUART formatted output implementation used within the ZigBee / IEEE 802.15.4 networking stack. The implementation formats output into a fixed-size global buffer and concatenates strings for %s format specifiers using strcat() without verifying remaining buffer capacity. When printfUART is invoked with a caller-controlled string longer than the available space, the unbounded sprintf/strcat sequence writes past the end of debugbuf, resulting in global memory corruption. This can cause denial of service, unintended behavior, or information disclosure via corrupted adjacent global state or UART output. | Jan 14, 2026 |
| CVE-2025-67399(opens NVD record) | Medium | 4.6 | An issue in AIRTH SMART HOME AQI MONITOR Bootloader v.1.005 allows a physically proximate attacker to obtain sensitive information via the UART port of the BK7231N controller (Wi-Fi and BLE module) on the device is open to access | Jan 14, 2026 |
| CVE-2025-71136(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status() It's possible for cp_read() and hdmi_read() to return -EIO. Those values are further used as indexes for accessing arrays. Fix that by checking return values where it's needed. Found by Linux Verification Center (linuxtesting.org) with SVACE. | Jan 14, 2026 |
| CVE-2025-71132(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: smc91x: fix broken irq-context in PREEMPT_RT When smc91x.c is built with PREEMPT_RT, the following splat occurs in FVP_RevC: [ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 [ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106] [ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work [ 13.062266] C ** replaying previous printk message ** [ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)} [ 13.062353] Hardware name: , BIOS [ 13.062382] Workqueue: mld mld_ifc_work [ 13.062469] Call trace: [ 13.062494] show_stack+0x24/0x40 (C) [ 13.062602] __dump_stack+0x28/0x48 [ 13.062710] dump_stack_lvl+0x7c/0xb0 [ 13.062818] dump_stack+0x18/0x34 [ 13.062926] process_scheduled_works+0x294/0x450 [ 13.063043] worker_thread+0x260/0x3d8 [ 13.063124] kthread+0x1c4/0x228 [ 13.063235] ret_from_fork+0x10/0x20 This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT, but smc_special_unlock() does not restore IRQs on PREEMPT_RT. The reason is that smc_special_unlock() calls spin_unlock_irqrestore(), and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero. To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). | Jan 14, 2026 |
| CVE-2025-71131(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: crypto: seqiv - Do not use req->iv after crypto_aead_encrypt As soon as crypto_aead_encrypt is called, the underlying request may be freed by an asynchronous completion. Thus dereferencing req->iv after it returns is invalid. Instead of checking req->iv against info, create a new variable unaligned_info and use it for that purpose instead. | Jan 14, 2026 |
| CVE-2025-71130(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd) | Jan 14, 2026 |
| CVE-2025-71128(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: erspan: Initialize options_len before referencing options. The struct ip_tunnel_info has a flexible array member named options that is protected by a counted_by(options_len) attribute. The compiler will use this information to enforce runtime bounds checking deployed by FORTIFY_SOURCE string helpers. As laid out in the GCC documentation, the counter must be initialized before the first reference to the flexible array member. After scanning through the files that use struct ip_tunnel_info and also refer to options or options_len, it appears the normal case is to use the ip_tunnel_info_opts_set() helper. Said helper would initialize options_len properly before copying data into options, however in the GRE ERSPAN code a partial update is done, preventing the use of the helper function. Before this change the handling of ERSPAN traffic in GRE tunnels would cause a kernel panic when the kernel is compiled with GCC 15+ and having FORTIFY_SOURCE configured: memcpy: detected buffer overflow: 4 byte write of buffer size 0 Call Trace: <IRQ> __fortify_panic+0xd/0xf erspan_rcv.cold+0x68/0x83 ? ip_route_input_slow+0x816/0x9d0 gre_rcv+0x1b2/0x1c0 gre_rcv+0x8e/0x100 ? raw_v4_input+0x2a0/0x2b0 ip_protocol_deliver_rcu+0x1ea/0x210 ip_local_deliver_finish+0x86/0x110 ip_local_deliver+0x65/0x110 ? ip_rcv_finish_core+0xd6/0x360 ip_rcv+0x186/0x1a0 Reported-at: https://launchpad.net/bugs/2129580 | Jan 14, 2026 |
| CVE-2025-71127(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Discard Beacon frames to non-broadcast address Beacon frames are required to be sent to the broadcast address, see IEEE Std 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frame shall be set to the broadcast address"). A unicast Beacon frame might be used as a targeted attack to get one of the associated STAs to do something (e.g., using CSA to move it to another channel). As such, it is better have strict filtering for this on the received side and discard all Beacon frames that are sent to an unexpected address. This is even more important for cases where beacon protection is used. The current implementation in mac80211 is correctly discarding unicast Beacon frames if the Protected Frame bit in the Frame Control field is set to 0. However, if that bit is set to 1, the logic used for checking for configured BIGTK(s) does not actually work. If the driver does not have logic for dropping unicast Beacon frames with Protected Frame bit 1, these frames would be accepted in mac80211 processing as valid Beacon frames even though they are not protected. This would allow beacon protection to be bypassed. While the logic for checking beacon protection could be extended to cover this corner case, a more generic check for discard all Beacon frames based on A1=unicast address covers this without needing additional changes. Address all these issues by dropping received Beacon frames if they are sent to a non-broadcast address. | Jan 14, 2026 |
| CVE-2025-71126(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid deadlock on fallback while reinjecting Jakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme #1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 #1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 #2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9c The packet scheduler could attempt a reinjection after receiving an MP_FAIL and before the infinite map has been transmitted, causing a deadlock since MPTCP needs to do the reinjection atomically from WRT fallback. Address the issue explicitly avoiding the reinjection in the critical scenario. Note that this is the only fallback critical section that could potentially send packets and hit the double-lock. | Jan 14, 2026 |
| CVE-2025-71123(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix string copying in parse_apply_sb_mount_options() strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce memtostr() and memtostr_pad()") provides additional information in that regard. So if this happens, the following warning is observed: strnlen: detected buffer overflow: 65 byte read of buffer size 64 WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032 Modules linked in: CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032 Call Trace: <TASK> __fortify_panic+0x1f/0x30 lib/string_helpers.c:1039 strnlen include/linux/fortify-string.h:235 [inline] sized_strscpy include/linux/fortify-string.h:309 [inline] parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline] __ext4_fill_super fs/ext4/super.c:5261 [inline] ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706 get_tree_bdev_flags+0x387/0x620 fs/super.c:1636 vfs_get_tree+0x93/0x380 fs/super.c:1814 do_new_mount fs/namespace.c:3553 [inline] path_mount+0x6ae/0x1f70 fs/namespace.c:3880 do_mount fs/namespace.c:3893 [inline] __do_sys_mount fs/namespace.c:4103 [inline] __se_sys_mount fs/namespace.c:4080 [inline] __x64_sys_mount+0x280/0x300 fs/namespace.c:4080 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e Since userspace is expected to provide s_mount_opts field to be at most 63 characters long with the ending byte being NUL-term, use a 64-byte buffer which matches the size of s_mount_opts, so that strscpy_pad() does its job properly. Return with error if the user still managed to provide a non-NUL-term string here. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | Jan 14, 2026 |
| CVE-2025-71120(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf A zero length gss_token results in pages == 0 and in_token->pages[0] is NULL. The code unconditionally evaluates page_address(in_token->pages[0]) for the initial memcpy, which can dereference NULL even when the copy length is 0. Guard the first memcpy so it only runs when length > 0. | Jan 14, 2026 |
| CVE-2025-71116(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: libceph: make decode_pool() more resilient against corrupted osdmaps If the osdmap is (maliciously) corrupted such that the encoded length of ceph_pg_pool envelope is less than what is expected for a particular encoding version, out-of-bounds reads may ensue because the only bounds check that is there is based on that length value. This patch adds explicit bounds checks for each field that is decoded or skipped. | Jan 14, 2026 |
| CVE-2025-71114(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: via_wdt: fix critical boot hang due to unnamed resource allocation The VIA watchdog driver uses allocate_resource() to reserve a MMIO region for the watchdog control register. However, the allocated resource was not given a name, which causes the kernel resource tree to contain an entry marked as "<BAD>" under /proc/iomem on x86 platforms. During boot, this unnamed resource can lead to a critical hang because subsequent resource lookups and conflict checks fail to handle the invalid entry properly. | Jan 14, 2026 |