Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
31,739 matching · page 539/635Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2022-49910(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) | May 1, 2025 |
| CVE-2022-49905(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible leaked pernet namespace in smc_init() In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ... | May 1, 2025 |
| CVE-2022-49899(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fscrypt: stop using keyrings subsystem for fscrypt_master_key The approach of fs/crypto/ internally managing the fscrypt_master_key structs as the payloads of "struct key" objects contained in a "struct key" keyring has outlived its usefulness. The original idea was to simplify the code by reusing code from the keyrings subsystem. However, several issues have arisen that can't easily be resolved: - When a master key struct is destroyed, blk_crypto_evict_key() must be called on any per-mode keys embedded in it. (This started being the case when inline encryption support was added.) Yet, the keyrings subsystem can arbitrarily delay the destruction of keys, even past the time the filesystem was unmounted. Therefore, currently there is no easy way to call blk_crypto_evict_key() when a master key is destroyed. Currently, this is worked around by holding an extra reference to the filesystem's request_queue(s). But it was overlooked that the request_queue reference is *not* guaranteed to pin the corresponding blk_crypto_profile too; for device-mapper devices that support inline crypto, it doesn't. This can cause a use-after-free. - When the last inode that was using an incompletely-removed master key is evicted, the master key removal is completed by removing the key struct from the keyring. Currently this is done via key_invalidate(). Yet, key_invalidate() takes the key semaphore. This can deadlock when called from the shrinker, since in fscrypt_ioctl_add_key(), memory is allocated with GFP_KERNEL under the same semaphore. - More generally, the fact that the keyrings subsystem can arbitrarily delay the destruction of keys (via garbage collection delay, or via random processes getting temporary key references) is undesirable, as it means we can't strictly guarantee that all secrets are ever wiped. - Doing the master key lookups via the keyrings subsystem results in the key_permission LSM hook being called. fscrypt doesn't want this, as all access control for encrypted files is designed to happen via the files themselves, like any other files. The workaround which SELinux users are using is to change their SELinux policy to grant key search access to all domains. This works, but it is an odd extra step that shouldn't really have to be done. The fix for all these issues is to change the implementation to what I should have done originally: don't use the keyrings subsystem to keep track of the filesystem's fscrypt_master_key structs. Instead, just store them in a regular kernel data structure, and rework the reference counting, locking, and lifetime accordingly. Retain support for RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free() with fscrypt_sb_delete(), which releases the keys synchronously and runs a bit earlier during unmount, so that block devices are still available. A side effect of this patch is that neither the master keys themselves nor the filesystem keyrings will be listed in /proc/keys anymore. ("Master key users" and the master key users keyrings will still be listed.) However, this was mostly an implementation detail, and it was intended just for debugging purposes. I don't know of anyone using it. This patch does *not* change how "master key users" (->mk_users) works; that still uses the keyrings subsystem. That is still needed for key quotas, and changing that isn't necessary to solve the issues listed above. If we decide to change that too, it would be a separate patch. I've marked this as fixing the original commit that added the fscrypt keyring, but as noted above the most important issue that this patch fixes wasn't introduced until the addition of inline encryption support. | May 1, 2025 |
| CVE-2022-49898(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix tree mod log mishandling of reallocated nodes We have been seeing the following panic in production kernel BUG at fs/btrfs/tree-mod-log.c:677! invalid opcode: 0000 [#1] SMP RIP: 0010:tree_mod_log_rewind+0x1b4/0x200 RSP: 0000:ffffc9002c02f890 EFLAGS: 00010293 RAX: 0000000000000003 RBX: ffff8882b448c700 RCX: 0000000000000000 RDX: 0000000000008000 RSI: 00000000000000a7 RDI: ffff88877d831c00 RBP: 0000000000000002 R08: 000000000000009f R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000100c40 R12: 0000000000000001 R13: ffff8886c26d6a00 R14: ffff88829f5424f8 R15: ffff88877d831a00 FS: 00007fee1d80c780(0000) GS:ffff8890400c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee1963a020 CR3: 0000000434f33002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: btrfs_get_old_root+0x12b/0x420 btrfs_search_old_slot+0x64/0x2f0 ? tree_mod_log_oldest_root+0x3d/0xf0 resolve_indirect_ref+0xfd/0x660 ? ulist_alloc+0x31/0x60 ? kmem_cache_alloc_trace+0x114/0x2c0 find_parent_nodes+0x97a/0x17e0 ? ulist_alloc+0x30/0x60 btrfs_find_all_roots_safe+0x97/0x150 iterate_extent_inodes+0x154/0x370 ? btrfs_search_path_in_tree+0x240/0x240 iterate_inodes_from_logical+0x98/0xd0 ? btrfs_search_path_in_tree+0x240/0x240 btrfs_ioctl_logical_to_ino+0xd9/0x180 btrfs_ioctl+0xe2/0x2ec0 ? __mod_memcg_lruvec_state+0x3d/0x280 ? do_sys_openat2+0x6d/0x140 ? kretprobe_dispatcher+0x47/0x70 ? kretprobe_rethook_handler+0x38/0x50 ? rethook_trampoline_handler+0x82/0x140 ? arch_rethook_trampoline_callback+0x3b/0x50 ? kmem_cache_free+0xfb/0x270 ? do_sys_openat2+0xd5/0x140 __x64_sys_ioctl+0x71/0xb0 do_syscall_64+0x2d/0x40 Which is this code in tree_mod_log_rewind() switch (tm->op) { case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); This occurs because we replay the nodes in order that they happened, and when we do a REPLACE we will log a REMOVE_WHILE_FREEING for every slot, starting at 0. 'n' here is the number of items in this block, which in this case was 1, but we had 2 REMOVE_WHILE_FREEING operations. The actual root cause of this was that we were replaying operations for a block that shouldn't have been replayed. Consider the following sequence of events 1. We have an already modified root, and we do a btrfs_get_tree_mod_seq(). 2. We begin removing items from this root, triggering KEY_REPLACE for it's child slots. 3. We remove one of the 2 children this root node points to, thus triggering the root node promotion of the remaining child, and freeing this node. 4. We modify a new root, and re-allocate the above node to the root node of this other root. The tree mod log looks something like this logical 0 op KEY_REPLACE (slot 1) seq 2 logical 0 op KEY_REMOVE (slot 1) seq 3 logical 0 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 4 logical 4096 op LOG_ROOT_REPLACE (old logical 0) seq 5 logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 1) seq 6 logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 7 logical 0 op LOG_ROOT_REPLACE (old logical 8192) seq 8 >From here the bug is triggered by the following steps 1. Call btrfs_get_old_root() on the new_root. 2. We call tree_mod_log_oldest_root(btrfs_root_node(new_root)), which is currently logical 0. 3. tree_mod_log_oldest_root() calls tree_mod_log_search_oldest(), which gives us the KEY_REPLACE seq 2, and since that's not a LOG_ROOT_REPLACE we incorrectly believe that we don't have an old root, because we expect that the most recent change should be a LOG_ROOT_REPLACE. 4. Back in tree_mod_log_oldest_root() we don't have a LOG_ROOT_REPLACE, so we don't set old_root, we simply use our e ---truncated--- | May 1, 2025 |
| CVE-2022-49892(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...] | May 1, 2025 |
| CVE-2022-49886(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Panic on bad configs that #VE on "private" memory access All normal kernel memory is "TDX private memory". This includes everything from kernel stacks to kernel text. Handling exceptions on arbitrary accesses to kernel memory is essentially impossible because they can happen in horribly nasty places like kernel entry/exit. But, TDX hardware can theoretically _deliver_ a virtualization exception (#VE) on any access to private memory. But, it's not as bad as it sounds. TDX can be configured to never deliver these exceptions on private memory with a "TD attribute" called ATTR_SEPT_VE_DISABLE. The guest has no way to *set* this attribute, but it can check it. Ensure ATTR_SEPT_VE_DISABLE is set in early boot. panic() if it is unset. There is no sane way for Linux to run with this attribute clear so a panic() is appropriate. There's small window during boot before the check where kernel has an early #VE handler. But the handler is only for port I/O and will also panic() as soon as it sees any other #VE, such as a one generated by a private memory access. [ dhansen: Rewrite changelog and rebase on new tdx_parse_tdinfo(). Add Kirill's tested-by because I made changes since he wrote this. ] | May 1, 2025 |
| CVE-2022-49884(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: Initialize gfn_to_pfn_cache locks in dedicated helper Move the gfn_to_pfn_cache lock initialization to another helper and call the new helper during VM/vCPU creation. There are race conditions possible due to kvm_gfn_to_pfn_cache_init()'s ability to re-initialize the cache's locks. For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock. (thread 1) | (thread 2) | kvm_xen_set_evtchn_fast | read_lock_irqsave(&gpc->lock, ...) | | kvm_gfn_to_pfn_cache_init | rwlock_init(&gpc->lock) read_unlock_irqrestore(&gpc->lock, ...) | Rename "cache_init" and "cache_destroy" to activate+deactivate to avoid implying that the cache really is destroyed/freed. Note, there more races in the newly named kvm_gpc_activate() that will be addressed separately. [sean: call out that this is a bug fix] | May 1, 2025 |
| CVE-2022-49883(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format On 64 bit host, if the guest doesn't have X86_FEATURE_LM, KVM will access 16 gprs to 32-bit smram image, causing out-ouf-bound ram access. On 32 bit host, the rsm_load_state_64/enter_smm_save_state_64 is compiled out, thus access overflow can't happen. | May 1, 2025 |
| CVE-2022-49882(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits) | May 1, 2025 |
| CVE-2022-49872(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net: gso: fix panic on frag_list with mixed head alloc types Since commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list"), it is allowed to change gso_size of a GRO packet. However, that commit assumes that "checking the first list_skb member suffices; i.e if either of the list_skb members have non head_frag head, then the first one has too". It turns out this assumption does not hold. We've seen BUG_ON being hit in skb_segment when skbs on the frag_list had differing head_frag with the vmxnet3 driver. This happens because __netdev_alloc_skb and __napi_alloc_skb can return a skb that is page backed or kmalloced depending on the requested size. As the result, the last small skb in the GRO packet can be kmalloced. There are three different locations where this can be fixed: (1) We could check head_frag in GRO and not allow GROing skbs with different head_frag. However, that would lead to performance regression on normal forward paths with unmodified gso_size, where !head_frag in the last packet is not a problem. (2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating that NETIF_F_SG is undesirable. That would need to eat a bit in sk_buff. Furthermore, that flag can be unset when all skbs on the frag_list are page backed. To retain good performance, bpf_skb_net_grow/shrink would have to walk the frag_list. (3) Walk the frag_list in skb_segment when determining whether NETIF_F_SG should be cleared. This of course slows things down. This patch implements (3). To limit the performance impact in skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set that have gso_size changed. Normal paths thus will not hit it. We could check only the last skb but since we need to walk the whole list anyway, let's stay on the safe side. | May 1, 2025 |
| CVE-2022-49858(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix SQE threshold checking Current way of checking available SQE count which is based on HW updated SQB count could result in driver submitting an SQE even before CQE for the previously transmitted SQE at the same index is processed in NAPI resulting losing SKB pointers, hence a leak. Fix this by checking a consumer index which is updated once CQE is processed. | May 1, 2025 |
| CVE-2022-49834(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of ns_writer on remount If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only. | May 1, 2025 |
| CVE-2022-49826(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ata: libata-transport: fix double ata_host_put() in ata_tport_add() In the error path in ata_tport_add(), when calling put_device(), ata_tport_release() is called, it will put the refcount of 'ap->host'. And then ata_host_put() is called again, the refcount is decreased to 0, ata_host_release() is called, all ports are freed and set to null. When unbinding the device after failure, ata_host_stop() is called to release the resources, it leads a null-ptr-deref(), because all the ports all freed and null. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ata_host_stop+0x3c/0x84 [libata] lr : release_nodes+0x64/0xd0 Call trace: ata_host_stop+0x3c/0x84 [libata] release_nodes+0x64/0xd0 devres_release_all+0xbc/0x1b0 device_unbind_cleanup+0x20/0x70 really_probe+0x158/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120 __driver_attach+0xb4/0x220 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x40 bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __pci_register_driver+0x4c/0x60 ahci_pci_driver_init+0x30/0x1000 [ahci] Fix this by removing redundant ata_host_put() in the error path. | May 1, 2025 |
| CVE-2022-49814(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: kcm: close race conditions on sk_receive_queue sk->sk_receive_queue is protected by skb queue lock, but for KCM sockets its RX path takes mux->rx_lock to protect more than just skb queue. However, kcm_recvmsg() still only grabs the skb queue lock, so race conditions still exist. We can teach kcm_recvmsg() to grab mux->rx_lock too but this would introduce a potential performance regression as struct kcm_mux can be shared by multiple KCM sockets. So we have to enforce skb queue lock in requeue_rx_msgs() and handle skb peek case carefully in kcm_wait_data(). Fortunately, skb_recv_datagram() already handles it nicely and is widely used by other sockets, we can just switch to skb_recv_datagram() after getting rid of the unnecessary sock lock in kcm_recvmsg() and kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets, so it is safe to get rid of this check too. I ran the original syzbot reproducer for 30 min without seeing any issue. | May 1, 2025 |
| CVE-2022-49804(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: s390: avoid using global register for current_stack_pointer Commit 30de14b1884b ("s390: current_stack_pointer shouldn't be a function") made current_stack_pointer a global register variable like on many other architectures. Unfortunately on s390 it uncovers old gcc bug which is fixed only since gcc-9.1 [gcc commit 3ad7fed1cc87 ("S/390: Fix PR89775. Stackpointer save/restore instructions removed")] and backported to gcc-8.4 and later. Due to this bug gcc versions prior to 8.4 generate broken code which leads to stack corruptions. Current minimal gcc version required to build the kernel is declared as 5.1. It is not possible to fix all old gcc versions, so work around this problem by avoiding using global register variable for current_stack_pointer. | May 1, 2025 |
| CVE-2022-49803(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). | May 1, 2025 |
| CVE-2022-49792(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: iio: adc: mp2629: fix potential array out of bound access Add sentinel at end of maps to avoid potential array out of bound access in iio core. | May 1, 2025 |
| CVE-2022-49789(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: scsi: zfcp: Fix double free of FSF request when qdio send fails We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] ---truncated--- | May 1, 2025 |
| CVE-2022-49775(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: tcp: cdg: allow tcp_cdg_release() to be called multiple times Apparently, mptcp is able to call tcp_disconnect() on an already disconnected flow. This is generally fine, unless current congestion control is CDG, because it might trigger a double-free [1] Instead of fixing MPTCP, and future bugs, we can make tcp_disconnect() more resilient. [1] BUG: KASAN: double-free in slab_free mm/slub.c:3539 [inline] BUG: KASAN: double-free in kfree+0xe2/0x580 mm/slub.c:4567 CPU: 0 PID: 3645 Comm: kworker/0:7 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report_invalid_free+0x81/0x190 mm/kasan/report.c:462 ____kasan_slab_free+0x18b/0x1c0 mm/kasan/common.c:356 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1759 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785 slab_free mm/slub.c:3539 [inline] kfree+0xe2/0x580 mm/slub.c:4567 tcp_disconnect+0x980/0x1e20 net/ipv4/tcp.c:3145 __mptcp_close_ssk+0x5ca/0x7e0 net/mptcp/protocol.c:2327 mptcp_do_fastclose net/mptcp/protocol.c:2592 [inline] mptcp_worker+0x78c/0xff0 net/mptcp/protocol.c:2627 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Allocated by task 3671: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] ____kasan_kmalloc mm/kasan/common.c:475 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525 kmalloc_array include/linux/slab.h:640 [inline] kcalloc include/linux/slab.h:671 [inline] tcp_cdg_init+0x10d/0x170 net/ipv4/tcp_cdg.c:380 tcp_init_congestion_control+0xab/0x550 net/ipv4/tcp_cong.c:193 tcp_reinit_congestion_control net/ipv4/tcp_cong.c:217 [inline] tcp_set_congestion_control+0x96c/0xaa0 net/ipv4/tcp_cong.c:391 do_tcp_setsockopt+0x505/0x2320 net/ipv4/tcp.c:3513 tcp_setsockopt+0xd4/0x100 net/ipv4/tcp.c:3801 mptcp_setsockopt+0x35f/0x2570 net/mptcp/sockopt.c:844 __sys_setsockopt+0x2d6/0x690 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 16: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1759 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1785 slab_free mm/slub.c:3539 [inline] kfree+0xe2/0x580 mm/slub.c:4567 tcp_cleanup_congestion_control+0x70/0x120 net/ipv4/tcp_cong.c:226 tcp_v4_destroy_sock+0xdd/0x750 net/ipv4/tcp_ipv4.c:2254 tcp_v6_destroy_sock+0x11/0x20 net/ipv6/tcp_ipv6.c:1969 inet_csk_destroy_sock+0x196/0x440 net/ipv4/inet_connection_sock.c:1157 tcp_done+0x23b/0x340 net/ipv4/tcp.c:4649 tcp_rcv_state_process+0x40e7/0x4990 net/ipv4/tcp_input.c:6624 tcp_v6_do_rcv+0x3fc/0x13c0 net/ipv6/tcp_ipv6.c:1525 tcp_v6_rcv+0x2e8e/0x3830 net/ipv6/tcp_ipv6.c:1759 ip6_protocol_deliver_rcu+0x2db/0x1950 net/ipv6/ip6_input.c:439 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:484 NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] ip6_input+0x9c/0xd ---truncated--- | May 1, 2025 |
| CVE-2022-49770(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ceph: avoid putting the realm twice when decoding snaps fails When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues. | May 1, 2025 |
| CVE-2022-49768(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: 9p: trans_fd/p9_conn_cancel: drop client lock earlier syzbot reported a double-lock here and we no longer need this lock after requests have been moved off to local list: just drop the lock earlier. | May 1, 2025 |
| CVE-2022-49763(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ntfs: fix use-after-free in ntfs_attr_find() Patch series "ntfs: fix bugs about Attribute", v2. This patchset fixes three bugs relative to Attribute in record: Patch 1 adds a sanity check to ensure that, attrs_offset field in first mft record loading from disk is within bounds. Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid dereferencing ATTR_RECORD before checking this ATTR_RECORD is within bounds. Patch 3 adds an overflow checking to avoid possible forever loop in ntfs_attr_find(). Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free detection as reported by Syzkaller. Although one of patch 1 or patch 2 can fix this, we still need both of them. Because patch 1 fixes the root cause, and patch 2 not only fixes the direct cause, but also fixes the potential out-of-bounds bug. This patch (of 3): Syzkaller reported use-after-free read as follows: ================================================================== BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607 [...] Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193 ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845 ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854 mount_bdev+0x34d/0x410 fs/super.c:1400 legacy_get_tree+0x105/0x220 fs/fs_context.c:610 vfs_get_tree+0x89/0x2f0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x1326/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> The buggy address belongs to the physical page: page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350 head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140 raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Kernel will loads $MFT/$DATA's first mft record in ntfs_read_inode_mount(). Yet the problem is that after loading, kernel doesn't check whether attrs_offset field is a valid value. To be more specific, if attrs_offset field is larger than bytes_allocated field, then it may trigger the out-of-bounds read bug(reported as use-after-free bug) in ntfs_attr_find(), when kernel tries to access the corresponding mft record's attribute. This patch solves it by adding the sanity check between attrs_offset field and bytes_allocated field, after loading the first mft record. | May 1, 2025 |
| CVE-2025-37791(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll() rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct size of rpl is sizeof(*rpl) which should be just 1 byte. Using the pointer size instead can cause stack corruption: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100 CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023 Workqueue: events module_flash_fw_work Call Trace: <TASK> panic+0x339/0x360 ? ethtool_cmis_wait_for_cond+0xf4/0x100 ? __pfx_status_success+0x10/0x10 ? __pfx_status_fail+0x10/0x10 __stack_chk_fail+0x10/0x10 ethtool_cmis_wait_for_cond+0xf4/0x100 ethtool_cmis_cdb_execute_cmd+0x1fc/0x330 ? __pfx_status_fail+0x10/0x10 cmis_cdb_module_features_get+0x6d/0xd0 ethtool_cmis_cdb_init+0x8a/0xd0 ethtool_cmis_fw_update+0x46/0x1d0 module_flash_fw_work+0x17/0xa0 process_one_work+0x179/0x390 worker_thread+0x239/0x340 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | May 1, 2025 |
| CVE-2025-37790(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: net: mctp: Set SOCK_RCU_FREE Bind lookup runs under RCU, so ensure that a socket doesn't go away in the middle of a lookup. | May 1, 2025 |
| CVE-2025-37789(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix nested key length validation in the set() action It's not safe to access nla_len(ovs_key) if the data is smaller than the netlink header. Check that the attribute is OK first. | May 1, 2025 |
| CVE-2025-37779(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: lib/iov_iter: fix to increase non slab folio refcount When testing EROFS file-backed mount over v9fs on qemu, I encountered a folio UAF issue. The page sanity check reports the following call trace. The root cause is that pages in bvec are coalesced across a folio bounary. The refcount of all non-slab folios should be increased to ensure p9_releas_pages can put them correctly. BUG: Bad page state in process md5sum pfn:18300 page: refcount:0 mapcount:0 mapping:00000000d5ad8e4e index:0x60 pfn:0x18300 head: order:0 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 aops:z_erofs_aops ino:30b0f dentry name(?):"GoogleExtServicesCn.apk" flags: 0x100000000000041(locked|head|node=0|zone=1) raw: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 raw: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 head: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000000 0000000000000000 ffffffffffffffff 0000000000000000 head: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Call Trace: dump_stack_lvl+0x53/0x70 bad_page+0xd4/0x220 __free_pages_ok+0x76d/0xf30 __folio_put+0x230/0x320 p9_release_pages+0x179/0x1f0 p9_virtio_zc_request+0xa2a/0x1230 p9_client_zc_rpc.constprop.0+0x247/0x700 p9_client_read_once+0x34d/0x810 p9_client_read+0xf3/0x150 v9fs_issue_read+0x111/0x360 netfs_unbuffered_read_iter_locked+0x927/0x1390 netfs_unbuffered_read_iter+0xa2/0xe0 vfs_iocb_iter_read+0x2c7/0x460 erofs_fileio_rq_submit+0x46b/0x5b0 z_erofs_runqueue+0x1203/0x21e0 z_erofs_readahead+0x579/0x8b0 read_pages+0x19f/0xa70 page_cache_ra_order+0x4ad/0xb80 filemap_readahead.isra.0+0xe7/0x150 filemap_get_pages+0x7aa/0x1890 filemap_read+0x320/0xc80 vfs_read+0x6c6/0xa30 ksys_read+0xf9/0x1c0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x71/0x79 | May 1, 2025 |
| CVE-2025-37778(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix dangling pointer in krb_authenticate krb_authenticate frees sess->user and does not set the pointer to NULL. It calls ksmbd_krb5_authenticate to reinitialise sess->user but that function may return without doing so. If that happens then smb2_sess_setup, which calls krb_authenticate, will be accessing free'd memory when it later uses sess->user. | May 1, 2025 |
| CVE-2025-37777(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __smb2_lease_break_noti() Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is referenced when ksmbd server thread terminates, It will not be freed, but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed asynchronously when the connection is disconnected. __smb2_lease_break_noti calls ksmbd_conn_write, which can cause use-after-free when conn->ksmbd_transport is already freed. | May 1, 2025 |
| CVE-2025-37776(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_break_all_levII_oplock() There is a room in smb_break_all_levII_oplock that can cause racy issues when unlocking in the middle of the loop. This patch use read lock to protect whole loop. | May 1, 2025 |
| CVE-2025-37774(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: slab: ensure slab->obj_exts is clear in a newly allocated slab page ktest recently reported crashes while running several buffered io tests with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack. The signature indicates an invalid address dereference with low bits of slab->obj_exts being set. The bits were outside of the range used by page_memcg_data_flags and objext_flags and hence were not masked out by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts. The typical crash log looks like this: 00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 00510 Mem abort info: 00510 ESR = 0x0000000096000045 00510 EC = 0x25: DABT (current EL), IL = 32 bits 00510 SET = 0, FnV = 0 00510 EA = 0, S1PTW = 0 00510 FSC = 0x05: level 1 translation fault 00510 Data abort info: 00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000 00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000 00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 00510 Internal error: Oops: 0000000096000045 [#1] SMP 00510 Modules linked in: 00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE 00510 Hardware name: linux,dummy-virt (DT) 00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190 00510 lr : __kmalloc_noprof+0x150/0x310 00510 sp : ffffff80c87df6c0 00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200 00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001 00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180 00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000 00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700 00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006 00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58 00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556 00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060 00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000 00510 Call trace: 00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P) 00510 __kmalloc_noprof+0x150/0x310 00510 __bch2_folio_create+0x5c/0xf8 00510 bch2_folio_create+0x2c/0x40 00510 bch2_readahead+0xc0/0x460 00510 read_pages+0x7c/0x230 00510 page_cache_ra_order+0x244/0x3a8 00510 page_cache_async_ra+0x124/0x170 00510 filemap_readahead.isra.0+0x58/0xa0 00510 filemap_get_pages+0x454/0x7b0 00510 filemap_read+0xdc/0x418 00510 bch2_read_iter+0x100/0x1b0 00510 vfs_read+0x214/0x300 00510 ksys_read+0x6c/0x108 00510 __arm64_sys_read+0x20/0x30 00510 invoke_syscall.constprop.0+0x54/0xe8 00510 do_el0_svc+0x44/0xc8 00510 el0_svc+0x18/0x58 00510 el0t_64_sync_handler+0x104/0x130 00510 el0t_64_sync+0x154/0x158 00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881) 00510 ---[ end trace 0000000000000000 ]--- 00510 Kernel panic - not syncing: Oops: Fatal exception 00510 SMP: stopping secondary CPUs 00510 Kernel Offset: disabled 00510 CPU features: 0x0000,000000e0,00000410,8240500b 00510 Memory Limit: none Investigation indicates that these bits are already set when we allocate slab page and are not zeroed out after allocation. We are not yet sure why these crashes start happening only recently but regardless of the reason, not initializing a field that gets used later is wrong. Fix it by initializing slab->obj_exts during slab page allocation. | May 1, 2025 |
| CVE-2025-37765(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix ttm_bo_delayed_delete oops Fix an oops in ttm_bo_delayed_delete which results from dererencing a dangling pointer: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216 Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024 Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290 Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? die_addr+0x3d/0x70 ? exc_general_protection+0x159/0x460 ? asm_exc_general_protection+0x27/0x30 ? dma_resv_iter_first_unlocked+0x55/0x290 dma_resv_wait_timeout+0x56/0x100 ttm_bo_delayed_delete+0x69/0xb0 [ttm] process_one_work+0x217/0x5c0 worker_thread+0x1c8/0x3d0 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0 kthread+0x10b/0x240 ? kthreads_online_cpu+0x140/0x140 ret_from_fork+0x40/0x70 ? kthreads_online_cpu+0x140/0x140 ret_from_fork_asm+0x11/0x20 </TASK> The cause of this is: - drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the reference to the shared dma_buf. The reference count is 0, so the dma_buf is destroyed, which in turn decrements the corresponding amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed - calling drm_gem_object_release then dma_resv_fini (which destroys the reservation object), then finally freeing the amdgpu_bo. - nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory formerly allocated to the amdgpu_bo. - nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls ttm_bo_release, which schedules ttm_bo_delayed_delete. - ttm_bo_delayed_delete runs and dereferences the dangling resv pointer, resulting in a general protection fault. Fix this by moving the drm_prime_gem_destroy call from nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will be run after ttm_bo_delayed_delete. | May 1, 2025 |
| CVE-2025-37763(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/imagination: take paired job reference For paired jobs, have the fragment job take a reference on the geometry job, so that the geometry job cannot be freed until the fragment job has finished with it. The geometry job structure is accessed when the fragment job is being prepared by the GPU scheduler. Taking the reference prevents the geometry job being freed until the fragment job no longer requires it. Fixes a use after free bug detected by KASAN: [ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr] [ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63 | May 1, 2025 |
| CVE-2025-37761(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix an out-of-bounds shift when invalidating TLB When the size of the range invalidated is larger than rounddown_pow_of_two(ULONG_MAX), The function macro roundup_pow_of_two(length) will hit an out-of-bounds shift [1]. Use a full TLB invalidation for such cases. v2: - Use a define for the range size limit over which we use a full TLB invalidation. (Lucas) - Use a better calculation of the limit. [1]: [ 39.202421] ------------[ cut here ]------------ [ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10 [ 39.202690] Tainted: [U]=USER [ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 39.202691] Call Trace: [ 39.202692] <TASK> [ 39.202695] dump_stack_lvl+0x6e/0xa0 [ 39.202699] ubsan_epilogue+0x5/0x30 [ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe] [ 39.202800] ? find_held_lock+0x2b/0x80 [ 39.202803] ? mark_held_locks+0x40/0x70 [ 39.202806] xe_svm_invalidate+0x459/0x700 [xe] [ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm] [ 39.202900] __mmu_notifier_release+0x1f5/0x270 [ 39.202905] exit_mmap+0x40e/0x450 [ 39.202912] __mmput+0x45/0x110 [ 39.202914] exit_mm+0xc5/0x130 [ 39.202916] do_exit+0x21c/0x500 [ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190 [ 39.202920] do_group_exit+0x36/0xa0 [ 39.202922] get_signal+0x8f8/0x900 [ 39.202926] arch_do_signal_or_restart+0x35/0x100 [ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290 [ 39.202932] do_syscall_64+0xa1/0x180 [ 39.202934] ? do_user_addr_fault+0x59f/0x8a0 [ 39.202937] ? lock_release+0xd2/0x2a0 [ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0 [ 39.202942] ? trace_hardirqs_off+0x4b/0xc0 [ 39.202944] ? clear_bhb_loop+0x25/0x80 [ 39.202946] ? clear_bhb_loop+0x25/0x80 [ 39.202947] ? clear_bhb_loop+0x25/0x80 [ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 39.202952] RIP: 0033:0x7fa945e543e1 [ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7. [ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293 [ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3 [ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff [ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0 [ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000 [ 39.202970] </TASK> [ 39.202970] ---[ end trace ]--- (cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad) | May 1, 2025 |
| CVE-2025-37757(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns. | May 1, 2025 |
| CVE-2025-37756(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237 | May 1, 2025 |
| CVE-2025-37755(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net: libwx: handle page_pool_dev_alloc_pages error page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page) but it would still proceed to use the NULL pointer and then crash. This is similar to commit 001ba0902046 ("net: fec: handle page_pool_dev_alloc_pages error"). This is found by our static analysis tool KNighter. | May 1, 2025 |
| CVE-2025-37752(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: move the limit validation It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed. Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations: tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1 This fixes the following syzkaller reported crash: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429 sfq_link net/sched/sch_sfq.c:203 [inline] sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline] dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375 | May 1, 2025 |
| CVE-2025-37751(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: x86/cpu: Avoid running off the end of an AMD erratum table The NULL array terminator at the end of erratum_1386_microcode was removed during the switch from x86_cpu_desc to x86_cpu_id. This causes readers to run off the end of the array. Replace the NULL. | May 1, 2025 |
| CVE-2025-37750(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in decryption with multichannel After commit f7025d861694 ("smb: client: allocate crypto only for primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in async decryption"), the channels started reusing AEAD TFM from primary channel to perform synchronous decryption, but that can't done as there could be multiple cifsd threads (one per channel) simultaneously accessing it to perform decryption. This fixes the following KASAN splat when running fstest generic/249 with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows Server 2022: BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110 Read of size 8 at addr ffff8881046c18a0 by task cifsd/986 CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 print_report+0x156/0x528 ? gf128mul_4k_lle+0xba/0x110 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? gf128mul_4k_lle+0xba/0x110 kasan_report+0xdf/0x1a0 ? gf128mul_4k_lle+0xba/0x110 gf128mul_4k_lle+0xba/0x110 ghash_update+0x189/0x210 shash_ahash_update+0x295/0x370 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_extract_iter_to_sg+0x10/0x10 ? ___kmalloc_large_node+0x10e/0x180 ? __asan_memset+0x23/0x50 crypto_ahash_update+0x3c/0xc0 gcm_hash_assoc_remain_continue+0x93/0xc0 crypt_message+0xe09/0xec0 [cifs] ? __pfx_crypt_message+0x10/0x10 [cifs] ? _raw_spin_unlock+0x23/0x40 ? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs] decrypt_raw_data+0x229/0x380 [cifs] ? __pfx_decrypt_raw_data+0x10/0x10 [cifs] ? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs] smb3_receive_transform+0x837/0xc80 [cifs] ? __pfx_smb3_receive_transform+0x10/0x10 [cifs] ? __pfx___might_resched+0x10/0x10 ? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs] cifs_demultiplex_thread+0x692/0x1570 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? rcu_lockdep_current_cpu_online+0x62/0xb0 ? find_held_lock+0x32/0x90 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xd/0xd0 ? trace_irq_enable.constprop.0+0xa8/0xe0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x1fe/0x380 ? kthread+0x10f/0x380 ? __pfx_kthread+0x10/0x10 ? local_clock_noinstr+0xd/0xd0 ? ret_from_fork+0x1b/0x60 ? local_clock+0x15/0x30 ? lock_release+0x29b/0x390 ? rcu_is_watching+0x20/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | May 1, 2025 |
| CVE-2025-37749(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: net: ppp: Add bound checking for skb data on ppp_sync_txmung Ensure we have enough data in linear buffer from skb before accessing initial bytes. This prevents potential out-of-bounds accesses when processing short packets. When ppp_sync_txmung receives an incoming package with an empty payload: (remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header) $18 = { type = 0x1, ver = 0x1, code = 0x0, sid = 0x2, length = 0x0, tag = 0xffff8880371cdb96 } from the skb struct (trimmed) tail = 0x16, end = 0x140, head = 0xffff88803346f400 "4", data = 0xffff88803346f416 ":\377", truesize = 0x380, len = 0x0, data_len = 0x0, mac_len = 0xe, hdr_len = 0x0, it is not safe to access data[2]. [pabeni@redhat.com: fixed subj typo] | May 1, 2025 |
| CVE-2025-37741(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: jfs: Prevent copying of nlink with value 0 from disk inode syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/en ---truncated--- | May 1, 2025 |
| CVE-2025-37738(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated--- | May 1, 2025 |
| CVE-2025-23159(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add a check to handle OOB in sfr region sfr->buf_size is in shared memory and can be modified by malicious user. OOB write is possible when the size is made higher than actual sfr data buffer. Cap the size to allocated size for such cases. | May 1, 2025 |
| CVE-2025-23158(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue. | May 1, 2025 |
| CVE-2025-23157(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: add check to avoid out of bound access There is a possibility that init_codecs is invoked multiple times during manipulated payload from video firmware. In such case, if codecs_count can get incremented to value more than MAX_CODEC_NUM, there can be OOB access. Reset the count so that it always starts from beginning. | May 1, 2025 |
| CVE-2025-23156(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: refactor hfi packet parsing logic words_count denotes the number of words in total payload, while data points to payload of various property within it. When words_count reaches last word, data can access memory beyond the total payload. This can lead to OOB access. With this patch, the utility api for handling individual properties now returns the size of data consumed. Accordingly remaining bytes are calculated before parsing the payload, thereby eliminates the OOB access possibilities. | May 1, 2025 |
| CVE-2025-23155(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint In stmmac_request_irq_multi_msi(), a pointer to the stack variable cpu_mask is passed to irq_set_affinity_hint(). This value is stored in irq_desc->affinity_hint, but once stmmac_request_irq_multi_msi() returns, the pointer becomes dangling. The affinity_hint is exposed via procfs with S_IRUGO permissions, allowing any unprivileged process to read it. Accessing this stale pointer can lead to: - a kernel oops or panic if the referenced memory has been released and unmapped, or - leakage of kernel data into userspace if the memory is re-used for other purposes. All platforms that use stmmac with PCI MSI (Intel, Loongson, etc) are affected. | May 1, 2025 |
| CVE-2025-23151(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix race between unprepare and queue_buf A client driver may use mhi_unprepare_from_transfer() to quiesce incoming data during the client driver's tear down. The client driver might also be processing data at the same time, resulting in a call to mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs after mhi_unprepare_from_transfer() has torn down the channel, a panic will occur due to an invalid dereference leading to a page fault. This occurs because mhi_gen_tre() does not verify the channel state after locking it. Fix this by having mhi_gen_tre() confirm the channel state is valid, or return error to avoid accessing deinitialized data. [mani: added stable tag] | May 1, 2025 |
| CVE-2025-23150(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix off-by-one error in do_split Syzkaller detected a use-after-free issue in ext4_insert_dentry that was caused by out-of-bounds access due to incorrect splitting in do_split. BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847 CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109 add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154 make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455 ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796 ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431 vfs_symlink+0x137/0x2e0 fs/namei.c:4615 do_symlinkat+0x222/0x3a0 fs/namei.c:4641 __do_sys_symlink fs/namei.c:4662 [inline] __se_sys_symlink fs/namei.c:4660 [inline] __x64_sys_symlink+0x7a/0x90 fs/namei.c:4660 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The following loop is located right above 'if' statement. for (i = count-1; i >= 0; i--) { /* is more than half of this entry in 2nd half of the block? */ if (size + map[i].size/2 > blocksize/2) break; size += map[i].size; move++; } 'i' in this case could go down to -1, in which case sum of active entries wouldn't exceed half the block size, but previous behaviour would also do split in half if sum would exceed at the very last block, which in case of having too many long name files in a single block could lead to out-of-bounds access and following use-after-free. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | May 1, 2025 |
| CVE-2025-23145(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer in can_accept_new_subflow When testing valkey benchmark tool with MPTCP, the kernel panics in 'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL. Call trace: mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P) subflow_syn_recv_sock (./net/mptcp/subflow.c:854) tcp_check_req (./net/ipv4/tcp_minisocks.c:863) tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268) ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207) ip_local_deliver_finish (./net/ipv4/ip_input.c:234) ip_local_deliver (./net/ipv4/ip_input.c:254) ip_rcv_finish (./net/ipv4/ip_input.c:449) ... According to the debug log, the same req received two SYN-ACK in a very short time, very likely because the client retransmits the syn ack due to multiple reasons. Even if the packets are transmitted with a relevant time interval, they can be processed by the server on different CPUs concurrently). The 'subflow_req->msk' ownership is transferred to the subflow the first, and there will be a risk of a null pointer dereference here. This patch fixes this issue by moving the 'subflow_req->msk' under the `own_req == true` conditional. Note that the !msk check in subflow_hmac_valid() can be dropped, because the same check already exists under the own_req mpj branch where the code has been moved to. | May 1, 2025 |