Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
31,739 matching · page 542/635Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2025-22086(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 </TASK> | Apr 16, 2025 |
| CVE-2025-22083(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint If vhost_scsi_set_endpoint is called multiple times without a vhost_scsi_clear_endpoint between them, we can hit multiple bugs found by Haoran Zhang: 1. Use-after-free when no tpgs are found: This fixes a use after free that occurs when vhost_scsi_set_endpoint is called more than once and calls after the first call do not find any tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds tpgs to add to the vs_tpg array match=true, so we will do: vhost_vq_set_backend(vq, vs_tpg); ... kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If vhost_scsi_set_endpoint is called again and no tpgs are found match=false so we skip the vhost_vq_set_backend call leaving the pointer to the vs_tpg we then free via: kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If a scsi request is then sent we do: vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend which sees the vs_tpg we just did a kfree on. 2. Tpg dir removal hang: This patch fixes an issue where we cannot remove a LIO/target layer tpg (and structs above it like the target) dir due to the refcount dropping to -1. The problem is that if vhost_scsi_set_endpoint detects a tpg is already in the vs->vs_tpg array or if the tpg has been removed so target_depend_item fails, the undepend goto handler will do target_undepend_item on all tpgs in the vs_tpg array dropping their refcount to 0. At this time vs_tpg contains both the tpgs we have added in the current vhost_scsi_set_endpoint call as well as tpgs we added in previous calls which are also in vs->vs_tpg. Later, when vhost_scsi_clear_endpoint runs it will do target_undepend_item on all the tpgs in the vs->vs_tpg which will drop their refcount to -1. Userspace will then not be able to remove the tpg and will hang when it tries to do rmdir on the tpg dir. 3. Tpg leak: This fixes a bug where we can leak tpgs and cause them to be un-removable because the target name is overwritten when vhost_scsi_set_endpoint is called multiple times but with different target names. The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup a vhost-scsi device to target/tpg mapping, then calls VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we haven't seen before (target1 has tpg1 but target2 has tpg2). When this happens we don't teardown the old target tpg mapping and just overwrite the target name and the vs->vs_tpg array. Later when we do vhost_scsi_clear_endpoint, we are passed in either target1 or target2's name and we will only match that target's tpgs when we loop over the vs->vs_tpg. We will then return from the function without doing target_undepend_item on the tpgs. Because of all these bugs, it looks like being able to call vhost_scsi_set_endpoint multiple times was never supported. The major user, QEMU, already has checks to prevent this use case. So to fix the issues, this patch prevents vhost_scsi_set_endpoint from being called if it's already successfully added tpgs. To add, remove or change the tpg config or target name, you must do a vhost_scsi_clear_endpoint first. | Apr 16, 2025 |
| CVE-2025-22081(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a couple integer overflows on 32bit systems On 32bit systems the "off + sizeof(struct NTFS_DE)" addition can have an integer wrapping issue. Fix it by using size_add(). | Apr 16, 2025 |
| CVE-2025-22080(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Prevent integer overflow in hdr_first_de() The "de_off" and "used" variables come from the disk so they both need to check. The problem is that on 32bit systems if they're both greater than UINT_MAX - 16 then the check does work as intended because of an integer overflow. | Apr 16, 2025 |
| CVE-2025-22079(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate l_tree_depth to avoid out-of-bounds access The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is limited to OCFS2_MAX_PATH_DEPTH. Add a check to prevent out-of-bounds access if l_tree_depth has an invalid value, which may occur when reading from a corrupted mounted disk [1]. | Apr 16, 2025 |
| CVE-2025-22077(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: Revert "smb: client: fix TCP timers deadlock after rmmod" This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801. Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is mentioned as CVE-2024-54680, but is actually did not fix anything; The issue can be reproduced on top of it. [0] Also, it reverted the change by commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") and introduced a real issue by reviving the kernel TCP socket. When a reconnect happens for a CIFS connection, the socket state transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync() in tcp_close() stops all timers for the socket. If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1 forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans. Usually, FIN can be retransmitted by the peer, but if the peer aborts the connection, the issue comes into reality. I warned about this privately by pointing out the exact report [1], but the bogus fix was finally merged. So, we should not stop the timers to finally kill the connection on our side in that case, meaning we must not use a kernel socket for TCP whose sk->sk_net_refcnt is 0. The kernel socket does not have a reference to its netns to make it possible to tear down netns without cleaning up every resource in it. For example, tunnel devices use a UDP socket internally, but we can destroy netns without removing such devices and let it complete during exit. Otherwise, netns would be leaked when the last application died. However, this is problematic for TCP sockets because TCP has timers to close the connection gracefully even after the socket is close()d. The lifetime of the socket and its netns is different from the lifetime of the underlying connection. If the socket user does not maintain the netns lifetime, the timer could be fired after the socket is close()d and its netns is freed up, resulting in use-after-free. Actually, we have seen so many similar issues and converted such sockets to have a reference to netns. That's why I converted the CIFS client socket to have a reference to netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right fix**. Regarding the LOCKDEP issue, we can prevent the module unload by bumping the module refcount when switching the LOCKDDEP key in sock_lock_init_class_and_name(). [2] For a while, let's revert the bogus fix. Note that now we can use sk_net_refcnt_upgrade() for the socket conversion, but I'll do so later separately to make backport easy. | Apr 16, 2025 |
| CVE-2025-22074(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix r_count dec/increment mismatch r_count is only increased when there is an oplock break wait, so r_count inc/decrement are not paired. This can cause r_count to become negative, which can lead to a problem where the ksmbd thread does not terminate. | Apr 16, 2025 |
| CVE-2025-22072(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: spufs: fix gang directory lifetimes prior to "[POWERPC] spufs: Fix gang destroy leaks" we used to have a problem with gang lifetimes - creation of a gang returns opened gang directory, which normally gets removed when that gets closed, but if somebody has created a context belonging to that gang and kept it alive until the gang got closed, removal failed and we ended up with a leak. Unfortunately, it had been fixed the wrong way. Dentry of gang directory was no longer pinned, and rmdir on close was gone. One problem was that failure of open kept calling simple_rmdir() as cleanup, which meant an unbalanced dput(). Another bug was in the success case - gang creation incremented link count on root directory, but that was no longer undone when gang got destroyed. Fix consists of * reverting the commit in question * adding a counter to gang, protected by ->i_rwsem of gang directory inode. * having it set to 1 at creation time, dropped in both spufs_dir_close() and spufs_gang_close() and bumped in spufs_create_context(), provided that it's not 0. * using simple_recursive_removal() to take the gang directory out when counter reaches zero. | Apr 16, 2025 |
| CVE-2025-22069(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26 [ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26 [ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54 [ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218 [ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results. | Apr 16, 2025 |
| CVE-2025-22062(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] | Apr 16, 2025 |
| CVE-2025-22061(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix qid report in airoha_tc_get_htb_get_leaf_queue() Fix the following kernel warning deleting HTB offloaded leafs and/or root HTB qdisc in airoha_eth driver properly reporting qid in airoha_tc_get_htb_get_leaf_queue routine. $tc qdisc replace dev eth1 root handle 10: htb offload $tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit $tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \ quanta 1514 3028 4542 6056 7570 9084 10598 12112 $tc qdisc del dev eth1 root [ 55.827864] ------------[ cut here ]------------ [ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4 [ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0 [ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT) [ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.976344] pc : 0xffffffc0798695a4 [ 55.979851] lr : 0xffffffc079869a20 [ 55.983358] sp : ffffffc0850536a0 [ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001 [ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800 [ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000 [ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000 [ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000 [ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 [ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000 [ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000 [ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001 [ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000 [ 56.058020] Call trace: [ 56.060459] 0xffffffc0798695a4 [ 56.063618] 0xffffffc079869a20 [ 56.066777] __qdisc_destroy+0x40/0xa0 [ 56.070528] qdisc_put+0x54/0x6c [ 56.073748] qdisc_graft+0x41c/0x648 [ 56.077324] tc_get_qdisc+0x168/0x2f8 [ 56.080978] rtnetlink_rcv_msg+0x230/0x330 [ 56.085076] netlink_rcv_skb+0x5c/0x128 [ 56.088913] rtnetlink_rcv+0x14/0x1c [ 56.092490] netlink_unicast+0x1e0/0x2c8 [ 56.096413] netlink_sendmsg+0x198/0x3c8 [ 56.100337] ____sys_sendmsg+0x1c4/0x274 [ 56.104261] ___sys_sendmsg+0x7c/0xc0 [ 56.107924] __sys_sendmsg+0x44/0x98 [ 56.111492] __arm64_sys_sendmsg+0x20/0x28 [ 56.115580] invoke_syscall.constprop.0+0x58/0xfc [ 56.120285] do_el0_svc+0x3c/0xbc [ 56.123592] el0_svc+0x18/0x4c [ 56.126647] el0t_64_sync_handler+0x118/0x124 [ 56.131005] el0t_64_sync+0x150/0x154 [ 56.134660] ---[ end trace 0000000000000000 ]--- | Apr 16, 2025 |
| CVE-2025-22060(opens NVD record) | Medium | 4.7 | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: Prevent parser TCAM memory corruption Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM information, from concurrent modifications. Both the TCAM and SRAM tables are indirectly accessed by configuring an index register that selects the row to read or write to. This means that operations must be atomic in order to, e.g., avoid spreading writes across multiple rows. Since the shadow SRAM array is used to find free rows in the hardware table, it must also be protected in order to avoid TOCTOU errors where multiple cores allocate the same row. This issue was detected in a situation where `mvpp2_set_rx_mode()` ran concurrently on two CPUs. In this particular case the MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the classifier unit to drop all incoming unicast - indicated by the `rx_classifier_drops` counter. | Apr 16, 2025 |
| CVE-2025-22059(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: udp: Fix multiple wraparounds of sk->sk_rmem_alloc. __udp_enqueue_schedule_skb() has the following condition: if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) goto drop; sk->sk_rcvbuf is initialised by net.core.rmem_default and later can be configured by SO_RCVBUF, which is limited by net.core.rmem_max, or SO_RCVBUFFORCE. If we set INT_MAX to sk->sk_rcvbuf, the condition is always false as sk->sk_rmem_alloc is also signed int. Then, the size of the incoming skb is added to sk->sk_rmem_alloc unconditionally. This results in integer overflow (possibly multiple times) on sk->sk_rmem_alloc and allows a single socket to have skb up to net.core.udp_mem[1]. For example, if we set a large value to udp_mem[1] and INT_MAX to sk->sk_rcvbuf and flood packets to the socket, we can see multiple overflows: # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 7956736 <-- (7956736 << 12) bytes > INT_MAX * 15 ^- PAGE_SHIFT # ss -uam State Recv-Q ... UNCONN -1757018048 ... <-- flipping the sign repeatedly skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0) Previously, we had a boundary check for INT_MAX, which was removed by commit 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc"). A complete fix would be to revert it and cap the right operand by INT_MAX: rmem = atomic_add_return(size, &sk->sk_rmem_alloc); if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX)) goto uncharge_drop; but we do not want to add the expensive atomic_add_return() back just for the corner case. Casting rmem to unsigned int prevents multiple wraparounds, but we still allow a single wraparound. # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> 12 # ss -uam State Recv-Q ... UNCONN -2147482816 ... <-- INT_MAX + 831 bytes skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947) So, let's define rmem and rcvbuf as unsigned int and check skb->truesize only when rcvbuf is large enough to lower the overflow possibility. Note that we still have a small chance to see overflow if multiple skbs to the same socket are processed on different core at the same time and each size does not exceed the limit but the total size does. Note also that we must ignore skb->truesize for a small buffer as explained in commit 363dc73acacb ("udp: be less conservative with sock rmem accounting"). | Apr 16, 2025 |
| CVE-2025-22057(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too. | Apr 16, 2025 |
| CVE-2025-22056(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_tunnel: fix geneve_opt type confusion addition When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the parsing logic should place every geneve_opt structure one by one compactly. Hence, when deciding the next geneve_opt position, the pointer addition should be in units of char *. However, the current implementation erroneously does type conversion before the addition, which will lead to heap out-of-bounds write. [ 6.989857] ================================================================== [ 6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70 [ 6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178 [ 6.991162] [ 6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1 [ 6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 6.992281] Call Trace: [ 6.992423] <TASK> [ 6.992586] dump_stack_lvl+0x44/0x5c [ 6.992801] print_report+0x184/0x4be [ 6.993790] kasan_report+0xc5/0x100 [ 6.994252] kasan_check_range+0xf3/0x1a0 [ 6.994486] memcpy+0x38/0x60 [ 6.994692] nft_tunnel_obj_init+0x977/0xa70 [ 6.995677] nft_obj_init+0x10c/0x1b0 [ 6.995891] nf_tables_newobj+0x585/0x950 [ 6.996922] nfnetlink_rcv_batch+0xdf9/0x1020 [ 6.998997] nfnetlink_rcv+0x1df/0x220 [ 6.999537] netlink_unicast+0x395/0x530 [ 7.000771] netlink_sendmsg+0x3d0/0x6d0 [ 7.001462] __sock_sendmsg+0x99/0xa0 [ 7.001707] ____sys_sendmsg+0x409/0x450 [ 7.002391] ___sys_sendmsg+0xfd/0x170 [ 7.003145] __sys_sendmsg+0xea/0x170 [ 7.004359] do_syscall_64+0x5e/0x90 [ 7.005817] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 7.006127] RIP: 0033:0x7ec756d4e407 [ 7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407 [ 7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003 [ 7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000 [ 7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8 Fix this bug with correct pointer addition and conversion in parse and dump code. | Apr 16, 2025 |
| CVE-2025-22055(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: net: fix geneve_opt length integer overflow struct geneve_opt uses 5 bit length for each single option, which means every vary size option should be smaller than 128 bytes. However, all current related Netlink policies cannot promise this length condition and the attacker can exploit a exact 128-byte size option to *fake* a zero length option and confuse the parsing logic, further achieve heap out-of-bounds read. One example crash log is like below: [ 3.905425] ================================================================== [ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0 [ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177 [ 3.906646] [ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1 [ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 3.907784] Call Trace: [ 3.907925] <TASK> [ 3.908048] dump_stack_lvl+0x44/0x5c [ 3.908258] print_report+0x184/0x4be [ 3.909151] kasan_report+0xc5/0x100 [ 3.909539] kasan_check_range+0xf3/0x1a0 [ 3.909794] memcpy+0x1f/0x60 [ 3.909968] nla_put+0xa9/0xe0 [ 3.910147] tunnel_key_dump+0x945/0xba0 [ 3.911536] tcf_action_dump_1+0x1c1/0x340 [ 3.912436] tcf_action_dump+0x101/0x180 [ 3.912689] tcf_exts_dump+0x164/0x1e0 [ 3.912905] fw_dump+0x18b/0x2d0 [ 3.913483] tcf_fill_node+0x2ee/0x460 [ 3.914778] tfilter_notify+0xf4/0x180 [ 3.915208] tc_new_tfilter+0xd51/0x10d0 [ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560 [ 3.919118] netlink_rcv_skb+0xcd/0x200 [ 3.919787] netlink_unicast+0x395/0x530 [ 3.921032] netlink_sendmsg+0x3d0/0x6d0 [ 3.921987] __sock_sendmsg+0x99/0xa0 [ 3.922220] __sys_sendto+0x1b7/0x240 [ 3.922682] __x64_sys_sendto+0x72/0x90 [ 3.922906] do_syscall_64+0x5e/0x90 [ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 3.924122] RIP: 0033:0x7e83eab84407 [ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407 [ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003 [ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c [ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0 [ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8 Fix these issues by enforing correct length condition in related policies. | Apr 16, 2025 |
| CVE-2025-22049(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Increase ARCH_DMA_MINALIGN up to 16 ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices (such as APBDMA) require 16 bytes alignment. When the data buffer length is too small, the hardware may make an error writing cacheline. Thus, it is dangerous to allocate a small memory buffer for DMA. It's always safe to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc() need small memory objects). Therefore, just increase it to 16. | Apr 16, 2025 |
| CVE-2025-22048(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Don't override subprog's return value The verifier test `calls: div by 0 in subprog` triggers a panic at the ld.bu instruction. The ld.bu insn is trying to load byte from memory address returned by the subprog. The subprog actually set the correct address at the a5 register (dedicated register for BPF return values). But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values") we also sign extended a5 to the a0 register (return value in LoongArch). For function call insn, we later propagate the a0 register back to a5 register. This is right for native calls but wrong for bpf2bpf calls which expect zero-extended return value in a5 register. So only move a0 to a5 for native calls (i.e. non-BPF_PSEUDO_CALL). | Apr 16, 2025 |
| CVE-2025-22047(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: x86/microcode/AMD: Fix __apply_microcode_amd()'s return value When verify_sha256_digest() fails, __apply_microcode_amd() should propagate the failure by returning false (and not -1 which is promoted to true). | Apr 16, 2025 |
| CVE-2025-22045(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs On the following path, flush_tlb_range() can be used for zapping normal PMD entries (PMD entries that point to page tables) together with the PTE entries in the pointed-to page table: collapse_pte_mapped_thp pmdp_collapse_flush flush_tlb_range The arm64 version of flush_tlb_range() has a comment describing that it can be used for page table removal, and does not use any last-level invalidation optimizations. Fix the X86 version by making it behave the same way. Currently, X86 only uses this information for the following two purposes, which I think means the issue doesn't have much impact: - In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be IPI'd to avoid issues with speculative page table walks. - In Hyper-V TLB paravirtualization, again for lazy TLB stuff. The patch "x86/mm: only invalidate final translations with INVLPGB" which is currently under review (see <https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>) would probably be making the impact of this a lot worse. | Apr 16, 2025 |
| CVE-2025-22044(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: fix narrowing conversion in acpi_nfit_ctl Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary bus families can be translated". This warning is emited if the argument is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first verifies that a user-provided value call_pkg->nd_family of type u64 is not equal to 0. Then the value is converted to int, and only after that is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while the lower 32 bits are zero. Furthermore, it is best to return EINVAL immediately upon seeing the invalid user input. The WARNING is insufficient to prevent further undefined behavior based on other invalid user input. All checks of the input value should be applied to the original variable call_pkg->nd_family. [iweiny: update commit message] | Apr 16, 2025 |
| CVE-2025-22043(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add bounds check for durable handle context Add missing bounds check for durable handle context. | Apr 16, 2025 |
| CVE-2025-22042(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: add bounds check for create lease context Add missing bounds check for create lease context. | Apr 16, 2025 |
| CVE-2025-22039(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL. | Apr 16, 2025 |
| CVE-2025-22038(opens NVD record) | High | 8.3 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed. | Apr 16, 2025 |
| CVE-2025-22037(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete. | Apr 16, 2025 |
| CVE-2025-22036(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: exfat: fix random stack corruption after get_block When get_block is called with a buffer_head allocated on the stack, such as do_mpage_readpage, stack corruption due to buffer_head UAF may occur in the following race condition situation. <CPU 0> <CPU 1> mpage_read_folio <<bh on stack>> do_mpage_readpage exfat_get_block bh_read __bh_read get_bh(bh) submit_bh wait_on_buffer ... end_buffer_read_sync __end_buffer_read_notouch unlock_buffer <<keep going>> ... ... ... ... <<bh is not valid out of mpage_read_folio>> . . another_function <<variable A on stack>> put_bh(bh) atomic_dec(bh->b_count) * stack corruption here * This patch returns -EAGAIN if a folio does not have buffers when bh_read needs to be called. By doing this, the caller can fallback to functions like block_read_full_folio(), create a buffer_head in the folio, and then call get_block again. Let's do not call bh_read() with on-stack buffer_head. | Apr 16, 2025 |
| CVE-2025-22034(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/gup: reject FOLL_SPLIT_PMD with hugetlb VMAs Patch series "mm: fixes for device-exclusive entries (hmm)", v2. Discussing the PageTail() call in make_device_exclusive_range() with Willy, I recently discovered [1] that device-exclusive handling does not properly work with THP, making the hmm-tests selftests fail if THPs are enabled on the system. Looking into more details, I found that hugetlb is not properly fenced, and I realized that something that was bugging me for longer -- how device-exclusive entries interact with mapcounts -- completely breaks migration/swapout/split/hwpoison handling of these folios while they have device-exclusive PTEs. The program below can be used to allocate 1 GiB worth of pages and making them device-exclusive on a kernel with CONFIG_TEST_HMM. Once they are device-exclusive, these folios cannot get swapped out (proc$pid/smaps_rollup will always indicate 1 GiB RSS no matter how much one forces memory reclaim), and when having a memory block onlined to ZONE_MOVABLE, trying to offline it will loop forever and complain about failed migration of a page that should be movable. # echo offline > /sys/devices/system/memory/memory136/state # echo online_movable > /sys/devices/system/memory/memory136/state # ./hmm-swap & ... wait until everything is device-exclusive # echo offline > /sys/devices/system/memory/memory136/state [ 285.193431][T14882] page: refcount:2 mapcount:0 mapping:0000000000000000 index:0x7f20671f7 pfn:0x442b6a [ 285.196618][T14882] memcg:ffff888179298000 [ 285.198085][T14882] anon flags: 0x5fff0000002091c(referenced|uptodate| dirty|active|owner_2|swapbacked|node=1|zone=3|lastcpupid=0x7ff) [ 285.201734][T14882] raw: ... [ 285.204464][T14882] raw: ... [ 285.207196][T14882] page dumped because: migration failure [ 285.209072][T14882] page_owner tracks the page as allocated [ 285.210915][T14882] page last allocated via order 0, migratetype Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_COMP|__GFP_ZERO), id 14926, tgid 14926 (hmm-swap), ts 254506295376, free_ts 227402023774 [ 285.216765][T14882] post_alloc_hook+0x197/0x1b0 [ 285.218874][T14882] get_page_from_freelist+0x76e/0x3280 [ 285.220864][T14882] __alloc_frozen_pages_noprof+0x38e/0x2740 [ 285.223302][T14882] alloc_pages_mpol+0x1fc/0x540 [ 285.225130][T14882] folio_alloc_mpol_noprof+0x36/0x340 [ 285.227222][T14882] vma_alloc_folio_noprof+0xee/0x1a0 [ 285.229074][T14882] __handle_mm_fault+0x2b38/0x56a0 [ 285.230822][T14882] handle_mm_fault+0x368/0x9f0 ... This series fixes all issues I found so far. There is no easy way to fix without a bigger rework/cleanup. I have a bunch of cleanups on top (some previous sent, some the result of the discussion in v1) that I will send out separately once this landed and I get to it. I wish we could just use some special present PROT_NONE PTEs instead of these (non-present, non-none) fake-swap entries; but that just results in the same problem we keep having (lack of spare PTE bits), and staring at other similar fake-swap entries, that ship has sailed. With this series, make_device_exclusive() doesn't actually belong into mm/rmap.c anymore, but I'll leave moving that for another day. I only tested this series with the hmm-tests selftests due to lack of HW, so I'd appreciate some testing, especially if the interaction between two GPUs wanting a device-exclusive entry works as expected. <program> #include <stdio.h> #include <fcntl.h> #include <stdint.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/ioctl.h> #include <linux/types.h> #include <linux/ioctl.h> #define HMM_DMIRROR_EXCLUSIVE _IOWR('H', 0x05, struct hmm_dmirror_cmd) struct hmm_dmirror_cmd { __u64 addr; __u64 ptr; __u64 npages; __u64 cpages; __u64 faults; }; const size_t size = 1 * 1024 * 1024 * 1024ul; const size_t chunk_size = 2 * 1024 * 1024ul; int m ---truncated--- | Apr 16, 2025 |
| CVE-2025-22025(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: nfsd: put dl_stid if fail to queue dl_recall Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we increment the reference count of dl_stid. We expect that after the corresponding work_struct is processed, the reference count of dl_stid will be decremented through the callback function nfsd4_cb_recall_release. However, if the call to nfsd4_run_cb fails, the incremented reference count of dl_stid will not be decremented correspondingly, leading to the following nfs4_stid leak: unreferenced object 0xffff88812067b578 (size 344): comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........ 00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N.. backtrace: kmem_cache_alloc+0x4b9/0x700 nfsd4_process_open1+0x34/0x300 nfsd4_open+0x2d1/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 unreferenced object 0xffff8881499f4d28 (size 368): comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I.... 30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... ....... backtrace: kmem_cache_alloc+0x4b9/0x700 nfs4_alloc_stid+0x29/0x210 alloc_init_deleg+0x92/0x2e0 nfs4_set_delegation+0x284/0xc00 nfs4_open_delegation+0x216/0x3f0 nfsd4_process_open2+0x2b3/0xee0 nfsd4_open+0x770/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if fail to queue dl_recall. | Apr 16, 2025 |
| CVE-2024-58096(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | Apr 16, 2025 |
| CVE-2024-58094(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode. | Apr 16, 2025 |
| CVE-2024-58093(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix link state exit during switch upstream function removal Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free"), we would free the ASPM link only after the last function on the bus pertaining to the given link was removed. That was too late. If function 0 is removed before sibling function, link->downstream would point to free'd memory after. After above change, we freed the ASPM parent link state upon any function removal on the bus pertaining to a given link. That is too early. If the link is to a PCIe switch with MFD on the upstream port, then removing functions other than 0 first would free a link which still remains parent_link to the remaining downstream ports. The resulting GPFs are especially frequent during hot-unplug, because pciehp removes devices on the link bus in reverse order. On that switch, function 0 is the virtual P2P bridge to the internal bus. Free exactly when function 0 is removed -- before the parent link is obsolete, but after all subordinate links are gone. [kwilczynski: commit log] | Apr 16, 2025 |
| CVE-2023-53034(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT. | Apr 16, 2025 |
| CVE-2025-22022(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Apply the link chain quirk on NEC isoc endpoints Two clearly different specimens of NEC uPD720200 (one with start/stop bug, one without) were seen to cause IOMMU faults after some Missed Service Errors. Faulting address is immediately after a transfer ring segment and patched dynamic debug messages revealed that the MSE was received when waiting for a TD near the end of that segment: [ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0 [ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000] [ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000] It gets even funnier if the next page is a ring segment accessible to the HC. Below, it reports MSE in segment at ff1e8000, plows through a zero-filled page at ff1e9000 and starts reporting events for TRBs in page at ff1ea000 every microframe, instead of jumping to seg ff1e6000. [ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0 [ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag. [ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint [ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31 [ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 At some point completion events change from Isoch Buffer Overrun to Short Packet and the HC finally finds cycle bit mismatch in ff1ec000. [ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13 [ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820 [ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2 It's possible that data from the isochronous device were written to random buffers of pending TDs on other endpoints (either IN or OUT), other devices or even other HCs in the same IOMMU domain. Lastly, an error from a different USB device on another HC. Was it caused by the above? I don't know, but it may have been. The disk was working without any other issues and generated PCIe traffic to starve the NEC of upstream BW and trigger those MSEs. The two HCs shared one x1 slot by means of a commercial "PCIe splitter" board. [ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd [ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00 [ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 Fortunately, it appears that this ridiculous bug is avoided by setting the chain bit of Link TRBs on isochronous rings. Other ancient HCs are known which also expect the bit to be set and they ignore Link TRBs if it's not. Reportedly, 0.95 spec guaranteed that the bit is set. The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports tens of MSEs per second and runs into the bug within seconds. Chaining Link TRBs allows the same workload to run for many minutes, many times. No ne ---truncated--- | Apr 16, 2025 |
| CVE-2025-22021(opens NVD record) | Critical | 10.0 | In the Linux kernel, the following vulnerability has been resolved: netfilter: socket: Lookup orig tuple for IPv6 SNAT nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to restore the original 5-tuple in case of SNAT, to be able to find the right socket (if any). Then socket_match() can correctly check whether the socket was transparent. However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this conntrack lookup, making xt_socket fail to match on the socket when the packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6. IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as pods' addresses are in the fd00::/8 ULA subnet and need to be replaced with the node's external address. Cilium leverages Envoy to enforce L7 policies, and Envoy uses transparent sockets. Cilium inserts an iptables prerouting rule that matches on `-m socket --transparent` and redirects the packets to localhost, but it fails to match SNATed IPv6 packets due to that missing conntrack lookup. | Apr 16, 2025 |
| CVE-2025-22019(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: bcachefs: bch2_ioctl_subvolume_destroy() fixes bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly pruning the dcache. Also, fix missing permissions checks. | Apr 16, 2025 |
| CVE-2025-30100(opens NVD record) | Medium | 6.7 | Dell Alienware Command Center 6.x, versions prior to 6.7.37.0 contain an Improper Access Control Vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. | Apr 16, 2025 |
| CVE-2025-29471(opens NVD record) | High | 8.3 | Cross Site Scripting vulnerability in Nagios Log Server v.2024R1.3.1 allows a remote attacker to execute arbitrary code via a payload into the Email field. | Apr 15, 2025 |
| CVE-2025-30740(opens NVD record) | Medium | 6.5 | Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Web Runtime SEC). Supported versions that are affected are 9.2.0.0-9.2.9.2. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). | Apr 15, 2025 |
| CVE-2025-30737(opens NVD record) | Medium | 5.7 | Vulnerability in the Oracle Smart View for Office product of Oracle Hyperion (component: Core Smart View). The supported version that is affected is 24.200. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Smart View for Office. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Smart View for Office accessible data as well as unauthorized access to critical data or complete access to all Oracle Smart View for Office accessible data. CVSS 3.1 Base Score 5.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:H/I:H/A:N). | Apr 15, 2025 |
| CVE-2025-30736(opens NVD record) | High | 7.4 | Vulnerability in the Java VM component of Oracle Database Server. Supported versions that are affected are 19.3-19.26, 21.3-21.17 and 23.4-23.7. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java VM. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Java VM accessible data as well as unauthorized access to critical data or complete access to all Java VM accessible data. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). | Apr 15, 2025 |
| CVE-2025-30735(opens NVD record) | High | 8.1 | Vulnerability in the PeopleSoft Enterprise CC Common Application Objects product of Oracle PeopleSoft (component: Page and Field Configuration). The supported version that is affected is 9.2. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise CC Common Application Objects. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise CC Common Application Objects accessible data as well as unauthorized access to critical data or complete access to all PeopleSoft Enterprise CC Common Application Objects accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | Apr 15, 2025 |
| CVE-2025-30733(opens NVD record) | Medium | 6.5 | Vulnerability in the RDBMS Listener component of Oracle Database Server. Supported versions that are affected are 19.3-19.26, 21.3-21.17 and 23.4-23.7. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise RDBMS Listener. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all RDBMS Listener accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N). | Apr 15, 2025 |
| CVE-2025-30732(opens NVD record) | Medium | 6.1 | Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Application Object Library, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Application Object Library accessible data as well as unauthorized read access to a subset of Oracle Application Object Library accessible data. CVSS 3.1 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). | Apr 15, 2025 |
| CVE-2025-30731(opens NVD record) | Low | 3.6 | Vulnerability in the Oracle Applications Technology Stack product of Oracle E-Business Suite (component: Configuration). Supported versions that are affected are 12.2.3-12.2.14. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Applications Technology Stack executes to compromise Oracle Applications Technology Stack. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Applications Technology Stack accessible data as well as unauthorized read access to a subset of Oracle Applications Technology Stack accessible data. CVSS 3.1 Base Score 3.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:N). | Apr 15, 2025 |
| CVE-2025-30730(opens NVD record) | High | 7.5 | Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.5-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Application Object Library. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). | Apr 15, 2025 |
| CVE-2025-30729(opens NVD record) | Medium | 5.5 | Vulnerability in the Oracle Communications Order and Service Management product of Oracle Communications Applications (component: Security). Supported versions that are affected are 7.4.0, 7.4.1 and 7.5.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Communications Order and Service Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Communications Order and Service Management accessible data as well as unauthorized read access to a subset of Oracle Communications Order and Service Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Communications Order and Service Management. CVSS 3.1 Base Score 5.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:L/I:L/A:L). | Apr 15, 2025 |
| CVE-2025-30728(opens NVD record) | High | 7.5 | Vulnerability in the Oracle Configurator product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Configurator. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Configurator accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). | Apr 15, 2025 |
| CVE-2025-30727(opens NVD record) | Critical | 9.8 | Vulnerability in the Oracle Scripting product of Oracle E-Business Suite (component: iSurvey Module). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Scripting. Successful attacks of this vulnerability can result in takeover of Oracle Scripting. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | Apr 15, 2025 |
| CVE-2025-30726(opens NVD record) | Medium | 5.3 | Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Application Object Library accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). | Apr 15, 2025 |