Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
54,620 matching · page 577/1093Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2025-20349(opens NVD record) | Medium | 6.3 | A vulnerability in the REST API of Cisco Catalyst Center could allow an authenticated, remote attacker to execute arbitrary commands in a restricted container as the root user. This vulnerability is due to insufficient validation of user-supplied input in REST API request parameters. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to inject arbitrary commands that would then be executed in a restricted container with root privileges. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. | Nov 13, 2025 |
| CVE-2025-20346(opens NVD record) | Medium | 4.3 | A vulnerability in Cisco Catalyst Center could allow an authenticated, remote attacker to execute operations that should require Administrator privileges. The attacker would need valid read-only user credentials. This vulnerability is due to improper role-based access control (RBAC). An attacker could exploit this vulnerability by logging in to an affected system and modifying certain policy configurations. A successful exploit could allow the attacker to modify policy configurations that are reserved for the Administrator role. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. | Nov 13, 2025 |
| CVE-2025-60689(opens NVD record) | Medium | 5.4 | An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication. | Nov 13, 2025 |
| CVE-2025-60688(opens NVD record) | Medium | 6.5 | A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (setDefResponse function). The binary reads the "IpAddress" parameter from a web request and copies it into a fixed-size stack buffer using strcpy() without any length validation. Maliciously crafted input can overflow the buffer, leading to potential arbitrary code execution or memory corruption, without requiring authentication. | Nov 13, 2025 |
| CVE-2025-60687(opens NVD record) | Medium | 6.5 | An unauthenticated command injection vulnerability exists in the ToToLink LR1200GB Router firmware V9.1.0u.6619_B20230130 within the cstecgi.cgi binary (sub_41EC68 function). The binary reads the "imei" parameter from a web request and verifies only that it is 15 characters long. The parameter is then directly inserted into a system command using sprintf() and executed with system(). Maliciously crafted IMEI input can execute arbitrary commands on the router without authentication. | Nov 13, 2025 |
| CVE-2025-60686(opens NVD record) | Medium | 5.1 | A local stack-based buffer overflow vulnerability exists in the infostat.cgi and cstecgi.cgi binaries of ToToLink routers (A720R V4.1.5cu.614_B20230630, LR1200GB V9.1.0u.6619_B20230130, and NR1800X V9.1.0u.6681_B20230703). Both programs parse the contents of /proc/net/arp using sscanf() with "%s" format specifiers into fixed-size stack buffers without length validation. Specifically, one function writes user-controlled data into a single-byte buffer, and the other into adjacent small arrays without bounds checking. An attacker who controls the contents of /proc/net/arp can trigger memory corruption, leading to denial of service or potential arbitrary code execution. | Nov 13, 2025 |
| CVE-2025-60685(opens NVD record) | Medium | 5.1 | A stack buffer overflow exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary (sub_401EE0 function). The binary reads the /proc/stat file using fgets() into a local buffer and subsequently parses the line using sscanf() into a single-byte variable with the %s format specifier. Maliciously crafted /proc/stat content can overwrite adjacent stack memory, potentially allowing an attacker with filesystem write privileges to execute arbitrary code on the device. | Nov 13, 2025 |
| CVE-2025-60684(opens NVD record) | Medium | 6.5 | A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (sub_42F32C function). The web interface reads the "lang" parameter and constructs Help URL strings using sprintf() into fixed-size stack buffers without proper length validation. Maliciously crafted input can overflow these buffers, potentially leading to arbitrary code execution or memory corruption, without requiring authentication. | Nov 13, 2025 |
| CVE-2025-60683(opens NVD record) | Medium | 6.5 | A command injection vulnerability exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary, specifically in the sub_40BFA4 function that handles network interface reinitialization from '/var/system/linux_vlan_reinit'. Input is only partially validated by checking the prefix of interface names, and is concatenated into shell commands executed via system() without escaping. An attacker with write access to this file can execute arbitrary commands on the device. | Nov 13, 2025 |
| CVE-2025-60682(opens NVD record) | Medium | 6.5 | A command injection vulnerability exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the cloudupdate_check binary, specifically in the sub_402414 function that handles cloud update parameters. User-supplied 'magicid' and 'url' values are directly concatenated into shell commands and executed via system() without any sanitization or escaping. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device. | Nov 13, 2025 |
| CVE-2025-12763(opens NVD record) | Medium | 6.8 | pgAdmin 4 versions up to 9.9 are affected by a command injection vulnerability on Windows systems. This issue is caused by the use of shell=True during backup and restore operations, enabling attackers to execute arbitrary system commands by providing specially crafted file path input. | Nov 13, 2025 |
| CVE-2025-40206(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^ | Nov 12, 2025 |
| CVE-2025-40205(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid potential out-of-bounds in btrfs_encode_fh() The function btrfs_encode_fh() does not properly account for the three cases it handles. Before writing to the file handle (fh), the function only returns to the user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes). However, when a parent exists and the root ID of the parent and the inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT (10 dwords, 40 bytes). If *max_len is not large enough, this write goes out of bounds because BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than BTRFS_FID_SIZE_CONNECTABLE originally returned. This results in an 8-byte out-of-bounds write at fid->parent_root_objectid = parent_root_id. A previous attempt to fix this issue was made but was lost. https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/ Although this issue does not seem to be easily triggerable, it is a potential memory corruption bug that should be fixed. This patch resolves the issue by ensuring the function returns the appropriate size for all three cases and validates that *max_len is large enough before writing any data. | Nov 12, 2025 |
| CVE-2025-40204(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: sctp: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this. | Nov 12, 2025 |
| CVE-2025-40203(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: listmount: don't call path_put() under namespace semaphore Massage listmount() and make sure we don't call path_put() under the namespace semaphore. If we put the last reference we're fscked. | Nov 12, 2025 |
| CVE-2025-40202(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ipmi: Rework user message limit handling The limit on the number of user messages had a number of issues, improper counting in some cases and a use after free. Restructure how this is all done to handle more in the receive message allocation routine, so all refcouting and user message limit counts are done in that routine. It's a lot cleaner and safer. | Nov 12, 2025 |
| CVE-2025-40201(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit() path is very broken. sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct itself. If tsk != current and tsk is not a leader, this process can exit/exec and task_lock(tsk->group_leader) may use the already freed task_struct. Another problem is that sys_prlimit64() can race with mt-exec which changes ->group_leader. In this case do_prlimit() may take the wrong lock, or (worse) ->group_leader may change between task_lock() and task_unlock(). Change sys_prlimit64() to take tasklist_lock when necessary. This is not nice, but I don't see a better fix for -stable. | Nov 12, 2025 |
| CVE-2025-40199(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches Helge reported that the introduction of PP_MAGIC_MASK let to crashes on boot on his 32-bit parisc machine. The cause of this is the mask is set too wide, so the page_pool_page_is_pp() incurs false positives which crashes the machine. Just disabling the check in page_pool_is_pp() will lead to the page_pool code itself malfunctioning; so instead of doing this, this patch changes the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel pointers for page_pool-tagged pages. The fix relies on the kernel pointers that alias with the pp_magic field always being above PAGE_OFFSET. With this assumption, we can use the lowest bit of the value of PAGE_OFFSET as the upper bound of the PP_DMA_INDEX_MASK, which should avoid the false positives. Because we cannot rely on PAGE_OFFSET always being a compile-time constant, nor on it always being >0, we fall back to disabling the dma_index storage when there are not enough bits available. This leaves us in the situation we were in before the patch in the Fixes tag, but only on a subset of architecture configurations. This seems to be the best we can do until the transition to page types in complete for page_pool pages. v2: - Make sure there's at least 8 bits available and that the PAGE_OFFSET bit calculation doesn't wrap | Nov 12, 2025 |
| CVE-2025-40198(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. | Nov 12, 2025 |
| CVE-2025-40196(opens NVD record) | Unscored | — | In the Linux kernel, the following vulnerability has been resolved: fs: quota: create dedicated workqueue for quota_release_work There is a kernel panic due to WARN_ONCE when panic_on_warn is set. This issue occurs when writeback is triggered due to sync call for an opened file(ie, writeback reason is WB_REASON_SYNC). When f2fs balance is needed at sync path, flush for quota_release_work is triggered. By default quota_release_work is queued to "events_unbound" queue which does not have WQ_MEM_RECLAIM flag. During f2fs balance "writeback" workqueue tries to flush quota_release_work causing kernel panic due to MEM_RECLAIM flag mismatch errors. This patch creates dedicated workqueue with WQ_MEM_RECLAIM flag for work quota_release_work. ------------[ cut here ]------------ WARNING: CPU: 4 PID: 14867 at kernel/workqueue.c:3721 check_flush_dependency+0x13c/0x148 Call trace: check_flush_dependency+0x13c/0x148 __flush_work+0xd0/0x398 flush_delayed_work+0x44/0x5c dquot_writeback_dquots+0x54/0x318 f2fs_do_quota_sync+0xb8/0x1a8 f2fs_write_checkpoint+0x3cc/0x99c f2fs_gc+0x190/0x750 f2fs_balance_fs+0x110/0x168 f2fs_write_single_data_page+0x474/0x7dc f2fs_write_data_pages+0x7d0/0xd0c do_writepages+0xe0/0x2f4 __writeback_single_inode+0x44/0x4ac writeback_sb_inodes+0x30c/0x538 wb_writeback+0xf4/0x440 wb_workfn+0x128/0x5d4 process_scheduled_works+0x1c4/0x45c worker_thread+0x32c/0x3e8 kthread+0x11c/0x1b0 ret_from_fork+0x10/0x20 Kernel panic - not syncing: kernel: panic_on_warn set ... | Nov 12, 2025 |
| CVE-2025-40190(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: guard against EA inode refcount underflow in xattr update syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA inode refcount that is already <= 0 and then applies ref_change (often -1). That lets the refcount underflow and we proceed with a bogus value, triggering errors like: EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1 EXT4-fs warning: ea_inode dec ref err=-117 Make the invariant explicit: if the current refcount is non-positive, treat this as on-disk corruption, emit ext4_error_inode(), and fail the operation with -EFSCORRUPTED instead of updating the refcount. Delete the WARN_ONCE() as negative refcounts are now impossible; keep error reporting in ext4_error_inode(). This prevents the underflow and the follow-on orphan/cleanup churn. | Nov 12, 2025 |
| CVE-2025-40187(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce() If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0 and sctp_ulpevent_make_authkey() returns 0, then the variable ai_ev remains zero and the zero will be dereferenced in the sctp_ulpevent_free() function. | Nov 12, 2025 |
| CVE-2025-40186(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request(). syzbot reported the splat below in tcp_conn_request(). [0] If a listener is close()d while a TFO socket is being processed in tcp_conn_request(), inet_csk_reqsk_queue_add() does not set reqsk->sk and calls inet_child_forget(), which calls tcp_disconnect() for the TFO socket. After the cited commit, tcp_disconnect() calls reqsk_fastopen_remove(), where reqsk_put() is called due to !reqsk->sk. Then, reqsk_fastopen_remove() in tcp_conn_request() decrements the last req->rsk_refcnt and frees reqsk, and __reqsk_free() at the drop_and_free label causes the refcount underflow for the listener and double-free of the reqsk. Let's remove reqsk_fastopen_remove() in tcp_conn_request(). Note that other callers make sure tp->fastopen_rsk is not NULL. [0]: refcount_t: underflow; use-after-free. WARNING: CPU: 12 PID: 5563 at lib/refcount.c:28 refcount_warn_saturate (lib/refcount.c:28) Modules linked in: CPU: 12 UID: 0 PID: 5563 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:refcount_warn_saturate (lib/refcount.c:28) Code: ab e8 8e b4 98 ff 0f 0b c3 cc cc cc cc cc 80 3d a4 e4 d6 01 00 75 9c c6 05 9b e4 d6 01 01 48 c7 c7 e8 df fb ab e8 6a b4 98 ff <0f> 0b e9 03 5b 76 00 cc 80 3d 7d e4 d6 01 00 0f 85 74 ff ff ff c6 RSP: 0018:ffffa79fc0304a98 EFLAGS: 00010246 RAX: d83af4db1c6b3900 RBX: ffff9f65c7a69020 RCX: d83af4db1c6b3900 RDX: 0000000000000000 RSI: 00000000ffff7fff RDI: ffffffffac78a280 RBP: 000000009d781b60 R08: 0000000000007fff R09: ffffffffac6ca280 R10: 0000000000017ffd R11: 0000000000000004 R12: ffff9f65c7b4f100 R13: ffff9f65c7d23c00 R14: ffff9f65c7d26000 R15: ffff9f65c7a64ef8 FS: 00007f9f962176c0(0000) GS:ffff9f65fcf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000180 CR3: 000000000dbbe006 CR4: 0000000000372ef0 Call Trace: <IRQ> tcp_conn_request (./include/linux/refcount.h:400 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/net/sock.h:1965 ./include/net/request_sock.h:131 net/ipv4/tcp_input.c:7301) tcp_rcv_state_process (net/ipv4/tcp_input.c:6708) tcp_v6_do_rcv (net/ipv6/tcp_ipv6.c:1670) tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1906) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438) ip6_input (net/ipv6/ip6_input.c:500) ipv6_rcv (net/ipv6/ip6_input.c:311) __netif_receive_skb (net/core/dev.c:6104) process_backlog (net/core/dev.c:6456) __napi_poll (net/core/dev.c:7506) net_rx_action (net/core/dev.c:7569 net/core/dev.c:7696) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480) </IRQ> | Nov 12, 2025 |
| CVE-2025-40183(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | Nov 12, 2025 |
| CVE-2025-40182(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: crypto: skcipher - Fix reqsize handling Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg") introduced cra_reqsize field in crypto_alg struct to replace type specific reqsize fields. It looks like this was introduced specifically for ahash and acomp from the commit description as subsequent commits add necessary changes in these alg frameworks. However, this is being recommended for use in all crypto algs [1] instead of setting reqsize using crypto_*_set_reqsize(). Using cra_reqsize in skcipher algorithms, hence, causes memory corruptions and crashes as the underlying functions in the algorithm framework have not been updated to set the reqsize properly from cra_reqsize. [2] Add proper set_reqsize calls in the skcipher init function to properly initialize reqsize for these algorithms in the framework. [1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/ [2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b | Nov 12, 2025 |
| CVE-2025-33119(opens NVD record) | Medium | 6.5 | IBM QRadar SIEM 7.5 through 7.5.0 UP14 stores user credentials in configuration files in source control which can be read by an authenticated user. | Nov 12, 2025 |
| CVE-2025-63396(opens NVD record) | Low | 3.3 | An issue was discovered in PyTorch v2.5 and v2.7.1. Omission of profiler.stop() can cause torch.profiler.profile (PythonTracer) to crash or hang during finalization, leading to a Denial of Service (DoS). | Nov 12, 2025 |
| CVE-2025-46608(opens NVD record) | Critical | 9.1 | Dell Data Lakehouse, versions prior to 1.6.0.0, contain(s) an Improper Access Control vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. This vulnerability is considered Critical, as it may result in unauthorized access with elevated privileges, compromising system integrity and customer data. Dell recommends customers upgrade to the latest version at the earliest opportunity. | Nov 12, 2025 |
| CVE-2025-36223(opens NVD record) | Medium | 5.4 | IBM OpenPages 9.0 and 9.1 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. | Nov 12, 2025 |
| CVE-2025-46428(opens NVD record) | High | 8.8 | Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Code execution. | Nov 12, 2025 |
| CVE-2025-46427(opens NVD record) | High | 8.8 | Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | Nov 12, 2025 |
| CVE-2025-27368(opens NVD record) | Medium | 4.3 | IBM OpenPages 9.0 and 9.1 is vulnerable to information disclosure of sensitive information due to a weaker than expected security for certain REST end points used by the user interface of OpenPages. An authenticated user is able to obtain certain information about system metadata for areas beyond what the user is intended to view. | Nov 12, 2025 |
| CVE-2024-48829(opens NVD record) | Medium | 6.7 | Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Control of Generation of Code ('Code Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution. | Nov 12, 2025 |
| CVE-2025-56385(opens NVD record) | Critical | 9.8 | A SQL injection vulnerability exists in the login functionality of WellSky Harmony version 4.1.0.2.83 within the 'xmHarmony.asp' endpoint. User-supplied input to the 'TXTUSERID' parameter is not properly sanitized before being incorporated into a SQL query. Successful authentication may lead to authentication bypass, data leakage, or full system compromise of backend database contents. | Nov 12, 2025 |
| CVE-2024-47866(opens NVD record) | High | 7.5 | Ceph is a distributed object, block, and file storage platform. In versions up to and including 19.2.3, using the argument `x-amz-copy-source` to put an object and specifying an empty string as its content leads to the RGW daemon crashing, resulting in a DoS attack. As of time of publication, no known patched versions exist. | Nov 12, 2025 |
| CVE-2025-2843(opens NVD record) | High | 8.8 | A flaw was found in the Observability Operator. The Operator creates a ServiceAccount with *ClusterRole* upon deployment of the *Namespace-Scoped* Custom Resource MonitorStack. This issue allows an adversarial Kubernetes Account with only namespaced-level roles, for example, a tenant controlling a namespace, to create a MonitorStack in the authorized namespace and then elevate permission to the cluster level by impersonating the ServiceAccount created by the Operator, resulting in privilege escalation and other issues. | Nov 12, 2025 |
| CVE-2025-13042(opens NVD record) | High | 8.8 | Inappropriate implementation in V8 in Google Chrome prior to 142.0.7444.166 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | Nov 12, 2025 |
| CVE-2025-40176(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tls: wait for pending async decryptions if tls_strp_msg_hold fails Async decryption calls tls_strp_msg_hold to create a clone of the input skb to hold references to the memory it uses. If we fail to allocate that clone, proceeding with async decryption can lead to various issues (UAF on the skb, writing into userspace memory after the recv() call has returned). In this case, wait for all pending decryption requests. | Nov 12, 2025 |
| CVE-2025-40174(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix SMP ordering in switch_mm_irqs_off() Stephen noted that it is possible to not have an smp_mb() between the loaded_mm store and the tlb_gen load in switch_mm(), meaning the ordering against flush_tlb_mm_range() goes out the window, and it becomes possible for switch_mm() to not observe a recent tlb_gen update and fail to flush the TLBs. [ dhansen: merge conflict fixed by Ingo ] | Nov 12, 2025 |
| CVE-2025-40173(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | Nov 12, 2025 |
| CVE-2025-40172(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() Currently, if find_and_map_user_pages() takes a DMA xfer request from the user with a length field set to 0, or in a rare case, the host receives QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size is equal to the requested transaction size, the function will return 0 before allocating an sgt or setting the fields of the dma_xfer struct. In that case, encode_addr_size_pairs() will try to access the sgt which will lead to a general protection fault. Return an EINVAL in case the user provides a zero-sized ALP, or the device requests continuation after all of the bytes have been transferred. | Nov 12, 2025 |
| CVE-2025-40171(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: move lsop put work to nvmet_fc_ls_req_op It’s possible for more than one async command to be in flight from __nvmet_fc_send_ls_req. For each command, a tgtport reference is taken. In the current code, only one put work item is queued at a time, which results in a leaked reference. To fix this, move the work item to the nvmet_fc_ls_req_op struct, which already tracks all resources related to the command. | Nov 12, 2025 |
| CVE-2025-40170(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: use dst_dev_rcu() in sk_setup_caps() Use RCU to protect accesses to dst->dev from sk_setup_caps() and sk_dst_gso_max_size(). Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(), and ip_dst_mtu_maybe_forward(). ip4_dst_hoplimit() can use dst_dev_net_rcu(). | Nov 12, 2025 |
| CVE-2025-40169(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | Nov 12, 2025 |
| CVE-2025-40168(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match(). smc_clc_prfx_match() is called from smc_listen_work() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Note that the returned value of smc_clc_prfx_match() is not used in the caller. | Nov 12, 2025 |
| CVE-2025-40167(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: detect invalid INLINE_DATA + EXTENTS flag combination syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity file on a corrupted ext4 filesystem mounted without a journal. The issue is that the filesystem has an inode with both the INLINE_DATA and EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66 Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1 This is an invalid combination since an inode should have either: - INLINE_DATA: data stored directly in the inode - EXTENTS: data stored in extent-mapped blocks Having both flags causes ext4_has_inline_data() to return true, skipping extent tree validation in __ext4_iget(). The unvalidated out-of-order extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer underflow when calculating hole sizes. Fix this by detecting this invalid flag combination early in ext4_iget() and rejecting the corrupted inode. | Nov 12, 2025 |
| CVE-2025-40166(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Check GuC running state before deregistering exec queue In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. (cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea) | Nov 12, 2025 |
| CVE-2025-40165(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: m2m: Fix streaming cleanup on release If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. | Nov 12, 2025 |
| CVE-2025-40159(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: xsk: Harden userspace-supplied xdp_desc validation Turned out certain clearly invalid values passed in xdp_desc from userspace can pass xp_{,un}aligned_validate_desc() and then lead to UBs or just invalid frames to be queued for xmit. desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len can cause positive integer overflow and wraparound, the same way low enough desc->addr with a non-zero pool->tx_metadata_len can cause negative integer overflow. Both scenarios can then pass the validation successfully. This doesn't happen with valid XSk applications, but can be used to perform attacks. Always promote desc->len to ``u64`` first to exclude positive overflows of it. Use explicit check_{add,sub}_overflow() when validating desc->addr (which is ``u64`` already). bloat-o-meter reports a little growth of the code size: add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44) Function old new delta xskq_cons_peek_desc 299 330 +31 xsk_tx_peek_release_desc_batch 973 1002 +29 xsk_generic_xmit 3148 3132 -16 but hopefully this doesn't hurt the performance much. | Nov 12, 2025 |
| CVE-2025-40158(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU in ip6_output() Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent possible UAF. We can remove rcu_read_lock()/rcu_read_unlock() pairs from ip6_finish_output2(). | Nov 12, 2025 |