Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
32,954 matching · page 587/660Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2022-49194(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Use stronger register read/writes to assure ordering GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems ---truncated--- | Feb 26, 2025 |
| CVE-2022-49178(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: memstick/mspro_block: fix handling of read-only devices Use set_disk_ro to propagate the read-only state to the block layer instead of checking for it in ->open and leaking a reference in case of a read-only device. | Feb 26, 2025 |
| CVE-2022-49174(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit In case of flex_bg feature (which is by default enabled), extents for any given inode might span across blocks from two different block group. ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the starting block group, but it fails to read it again when the extent length boundary overflows to another block group. Then in this below loop it accesses memory beyond the block group bitmap buffer_head and results into a data abort. for (i = 0; i < clen; i++) if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state) already++; This patch adds this functionality for checking block group boundary in ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different block group. w/o this patch, I was easily able to hit a data access abort using Power platform. <...> [ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters [ 74.533214] EXT4-fs (loop3): shut down requested (2) [ 74.536705] Aborting journal on device loop3-8. [ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000 [ 74.703727] Faulting instruction address: 0xc0000000007bffb8 cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060] pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0 lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0 sp: c000000015db7300 msr: 800000000280b033 dar: c00000005e980000 dsisr: 40000000 current = 0xc000000027af6880 paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01 pid = 5167, comm = mount <...> enter ? for help [c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410 [c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000 [c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0 [c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0 [c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0 [c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10 [c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350 [c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40 [c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100 [c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70 [c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550 [c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0 [c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250 | Feb 26, 2025 |
| CVE-2022-49172(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: parisc: Fix non-access data TLB cache flush faults When a page is not present, we get non-access data TLB faults from the fdc and fic instructions in flush_user_dcache_range_asm and flush_user_icache_range_asm. When these occur, the cache line is not invalidated and potentially we get memory corruption. The problem was hidden by the nullification of the flush instructions. These faults also affect performance. With pa8800/pa8900 processors, there will be 32 faults per 4 KB page since the cache line is 128 bytes. There will be more faults with earlier processors. The problem is fixed by using flush_cache_pages(). It does the flush using a tmp alias mapping. The flush_cache_pages() call in flush_cache_range() flushed too large a range. V2: Remove unnecessary preempt_disable() and preempt_enable() calls. | Feb 26, 2025 |
| CVE-2022-49170(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on curseg->alloc_type As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215657 - Overview UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image - Reproduce tested on kernel 5.17-rc4, 5.17-rc6 1. mkdir test_crash 2. cd test_crash 3. unzip tmp2.zip 4. mkdir mnt 5. ./single_test.sh f2fs 2 - Kernel dump [ 46.434454] loop0: detected capacity change from 0 to 131072 [ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9 [ 46.738319] ================================================================================ [ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 [ 46.738475] index 231 is out of range for type 'unsigned int [2]' [ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1 [ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 46.738551] Call Trace: [ 46.738556] <TASK> [ 46.738563] dump_stack_lvl+0x47/0x5c [ 46.738581] ubsan_epilogue+0x5/0x50 [ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80 [ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs] [ 46.738819] do_write_page+0xef/0x210 [f2fs] [ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs] [ 46.739038] __write_node_page+0x2b7/0x920 [f2fs] [ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs] [ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs] [ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs] [ 46.739507] deactivate_locked_super+0x60/0xc0 [ 46.739517] deactivate_super+0x70/0xb0 [ 46.739524] cleanup_mnt+0x11a/0x200 [ 46.739532] __cleanup_mnt+0x16/0x20 [ 46.739538] task_work_run+0x67/0xa0 [ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0 [ 46.739559] syscall_exit_to_user_mode+0x26/0x40 [ 46.739568] do_syscall_64+0x46/0xb0 [ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is we missed to do sanity check on curseg->alloc_type, result in out-of-bound accessing on sbi->block_count[] array, fix it. | Feb 26, 2025 |
| CVE-2022-49167(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not double complete bio on errors during compressed reads I hit some weird panics while fixing up the error handling from btrfs_lookup_bio_sums(). Turns out the compression path will complete the bio we use if we set up any of the compression bios and then return an error, and then btrfs_submit_data_bio() will also call bio_endio() on the bio. Fix this by making btrfs_submit_compressed_read() responsible for calling bio_endio() on the bio if there are any errors. Currently it was only doing it if we created the compression bios, otherwise it was depending on btrfs_submit_data_bio() to do the right thing. This creates the above problem, so fix up btrfs_submit_compressed_read() to always call bio_endio() in case of an error, and then simply return from btrfs_submit_data_bio() if we had to call btrfs_submit_compressed_read(). | Feb 26, 2025 |
| CVE-2022-49163(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: fix a bug of accessing array out of bounds When error occurs in parsing jpeg, the slot isn't acquired yet, it may be the default value MXC_MAX_SLOTS. If the driver access the slot using the incorrect slot number, it will access array out of bounds. The result is the driver will change num_domains, which follows slot_data in struct mxc_jpeg_dev. Then the driver won't detach the pm domain at rmmod, which will lead to kernel panic when trying to insmod again. | Feb 26, 2025 |
| CVE-2022-49162(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: video: fbdev: sm712fb: Fix crash in smtcfb_write() When the sm712fb driver writes three bytes to the framebuffer, the driver will crash: BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_write+0x454/0x5b0 Call Trace: vfs_write+0x291/0xd60 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_write+0xce/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix it by removing the open-coded endianness fixup-code. | Feb 26, 2025 |
| CVE-2022-49160(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash during module load unload test During purex packet handling the driver was incorrectly freeing a pre-allocated structure. Fix this by skipping that entry. System crashed with the following stack during a module unload test. Call Trace: sbitmap_init_node+0x7f/0x1e0 sbitmap_queue_init_node+0x24/0x150 blk_mq_init_bitmaps+0x3d/0xa0 blk_mq_init_tags+0x68/0x90 blk_mq_alloc_map_and_rqs+0x44/0x120 blk_mq_alloc_set_map_and_rqs+0x63/0x150 blk_mq_alloc_tag_set+0x11b/0x230 scsi_add_host_with_dma.cold+0x3f/0x245 qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx] Call Trace with slub_debug and debug kernel: kasan_report_invalid_free+0x50/0x80 __kasan_slab_free+0x137/0x150 slab_free_freelist_hook+0xc6/0x190 kfree+0xe8/0x2e0 qla2x00_free_device+0x3bb/0x5d0 [qla2xxx] qla2x00_remove_one+0x668/0xcf0 [qla2xxx] | Feb 26, 2025 |
| CVE-2022-49159(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Implement ref count for SRB The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). | Feb 26, 2025 |
| CVE-2022-49154(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: fix panic on out-of-bounds guest IRQ As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b0677fc61 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. | Feb 26, 2025 |
| CVE-2022-49149(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call timer start racing with call destruction The rxrpc_call struct has a timer used to handle various timed events relating to a call. This timer can get started from the packet input routines that are run in softirq mode with just the RCU read lock held. Unfortunately, because only the RCU read lock is held - and neither ref or other lock is taken - the call can start getting destroyed at the same time a packet comes in addressed to that call. This causes the timer - which was already stopped - to get restarted. Later, the timer dispatch code may then oops if the timer got deallocated first. Fix this by trying to take a ref on the rxrpc_call struct and, if successful, passing that ref along to the timer. If the timer was already running, the ref is discarded. The timer completion routine can then pass the ref along to the call's work item when it queues it. If the timer or work item where already queued/running, the extra ref is discarded. | Feb 26, 2025 |
| CVE-2022-49142(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net: preserve skb_end_offset() in skb_unclone_keeptruesize() syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | Feb 26, 2025 |
| CVE-2022-49138(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Ignore multiple conn complete events When one of the three connection complete events is received multiple times for the same handle, the device is registered multiple times which leads to memory corruptions. Therefore, consequent events for a single connection are ignored. The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET is introduced to identify new connections. To make sure the events do not contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks are introduced. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 | Feb 26, 2025 |
| CVE-2022-49127(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process. | Feb 26, 2025 |
| CVE-2022-49114(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free. | Feb 26, 2025 |
| CVE-2022-49111(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated--- | Feb 26, 2025 |
| CVE-2022-49110(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revisit gc autotuning as of commit 4608fdfc07e1 ("netfilter: conntrack: collect all entries in one cycle") conntrack gc was changed to run every 2 minutes. On systems where conntrack hash table is set to large value, most evictions happen from gc worker rather than the packet path due to hash table distribution. This causes netlink event overflows when events are collected. This change collects average expiry of scanned entries and reschedules to the average remaining value, within 1 to 60 second interval. To avoid event overflows, reschedule after each bucket and add a limit for both run time and number of evictions per run. If more entries have to be evicted, reschedule and restart 1 jiffy into the future. | Feb 26, 2025 |
| CVE-2022-49096(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: sfc: add missing xdp queue reinitialization After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] | Feb 26, 2025 |
| CVE-2022-49094(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net/tls: fix slab-out-of-bounds bug in decrypt_internal The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in tls_set_sw_offload(). The return value of crypto_aead_ivsize() for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes memory space will trigger slab-out-of-bounds bug as following: ================================================================== BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls] Read of size 16 at addr ffff888114e84e60 by task tls/10911 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x5e/0x5db ? decrypt_internal+0x385/0xc40 [tls] kasan_report+0xab/0x120 ? decrypt_internal+0x385/0xc40 [tls] kasan_check_range+0xf9/0x1e0 memcpy+0x20/0x60 decrypt_internal+0x385/0xc40 [tls] ? tls_get_rec+0x2e0/0x2e0 [tls] ? process_rx_list+0x1a5/0x420 [tls] ? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls] decrypt_skb_update+0x9d/0x400 [tls] tls_sw_recvmsg+0x3c8/0xb50 [tls] Allocated by task 10911: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 tls_set_sw_offload+0x2eb/0xa20 [tls] tls_setsockopt+0x68c/0x700 [tls] __sys_setsockopt+0xfe/0x1b0 Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size when memcpy() iv value in TLS_1_3_VERSION scenario. | Feb 26, 2025 |
| CVE-2022-49093(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: skbuff: fix coalescing for page_pool fragment recycling Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce(). | Feb 26, 2025 |
| CVE-2022-49092(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix route with nexthop object delete warning FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f2455 ---truncated--- | Feb 26, 2025 |
| CVE-2022-49089(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition The documentation of the function rvt_error_qp says both r_lock and s_lock need to be held when calling that function. It also asserts using lockdep that both of those locks are held. However, the commit I referenced in Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no longer covered by r_lock. This results in the lockdep assertion failing and also possibly in a race condition. | Feb 26, 2025 |
| CVE-2022-49084(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: qede: confirm skb is allocated before using qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). | Feb 26, 2025 |
| CVE-2022-49075(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix qgroup reserve overflow the qgroup limit We use extent_changeset->bytes_changed in qgroup_reserve_data() to record how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the bytes_changed is set as "unsigned int", and it will overflow if we try to fallocate a range larger than 4GiB. The result is we reserve less bytes and eventually break the qgroup limit. Unlike regular buffered/direct write, which we use one changeset for each ordered extent, which can never be larger than 256M. For fallocate, we use one changeset for the whole range, thus it no longer respects the 256M per extent limit, and caused the problem. The following example test script reproduces the problem: $ cat qgroup-overflow.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj mkfs.btrfs -f $DEV mount $DEV $MNT # Set qgroup limit to 2GiB. btrfs quota enable $MNT btrfs qgroup limit 2G $MNT # Try to fallocate a 3GiB file. This should fail. echo echo "Try to fallocate a 3GiB file..." fallocate -l 3G $MNT/3G.file # Try to fallocate a 5GiB file. echo echo "Try to fallocate a 5GiB file..." fallocate -l 5G $MNT/5G.file # See we break the qgroup limit. echo sync btrfs qgroup show -r $MNT umount $MNT When running the test: $ ./qgroup-overflow.sh (...) Try to fallocate a 3GiB file... fallocate: fallocate failed: Disk quota exceeded Try to fallocate a 5GiB file... qgroupid rfer excl max_rfer -------- ---- ---- -------- 0/5 5.00GiB 5.00GiB 2.00GiB Since we have no control of how bytes_changed is used, it's better to set it to u64. | Feb 26, 2025 |
| CVE-2022-49073(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: Fix crash due to OOB write the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." BugLink: https://github.com/openwrt/openwrt/issues/9505 | Feb 26, 2025 |
| CVE-2022-49065(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix the svc_deferred_event trace class Fix a NULL deref crash that occurs when an svc_rqst is deferred while the sunrpc tracing subsystem is enabled. svc_revisit() sets dr->xprt to NULL, so it can't be relied upon in the tracepoint to provide the remote's address. Unfortunately we can't revert the "svc_deferred_class" hunk in commit ece200ddd54b ("sunrpc: Save remote presentation address in svc_xprt for trace events") because there is now a specific check of event format specifiers for unsafe dereferences. The warning that check emits is: event svc_defer_recv has unsafe dereference of argument 1 A "%pISpc" format specifier with a "struct sockaddr *" is indeed flagged by this check. Instead, take the brute-force approach used by the svcrdma_qp_error tracepoint. Convert the dr::addr field into a presentation address in the TP_fast_assign() arm of the trace event, and store that as a string. This fix can be backported to -stable kernels. In the meantime, commit c6ced22997ad ("tracing: Update print fmt check to handle new __get_sockaddr() macro") is now in v5.18, so this wonky fix can be replaced with __sockaddr() and friends properly during the v5.19 merge window. | Feb 26, 2025 |
| CVE-2022-49058(opens NVD record) | Critical | 9.1 | In the Linux kernel, the following vulnerability has been resolved: cifs: potential buffer overflow in handling symlinks Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer. | Feb 26, 2025 |
| CVE-2022-49054(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests hv_panic_page might contain guest-sensitive information, do not dump it over to Hyper-V by default in isolated guests. While at it, update some comments in hyperv_{panic,die}_event(). | Feb 26, 2025 |
| CVE-2022-49052(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: mm: fix unexpected zeroed page mapping with zram swap Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly. | Feb 26, 2025 |
| CVE-2022-49048(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix panic when forwarding a pkt with no in6 dev kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5% | Feb 26, 2025 |
| CVE-2021-47656(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: jffs2: fix use-after-free in jffs2_clear_xattr_subsystem When we mount a jffs2 image, assume that the first few blocks of the image are normal and contain at least one xattr-related inode, but the next block is abnormal. As a result, an error is returned in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then called in jffs2_build_filesystem() and then again in jffs2_do_fill_super(). Finally we can observe the following report: ================================================================== BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac Read of size 8 at addr ffff8881243384e0 by task mount/719 Call Trace: dump_stack+0x115/0x16b jffs2_clear_xattr_subsystem+0x95/0x6ac jffs2_do_fill_super+0x84f/0xc30 jffs2_fill_super+0x2ea/0x4c0 mtd_get_sb+0x254/0x400 mtd_get_sb_by_nr+0x4f/0xd0 get_tree_mtd+0x498/0x840 jffs2_get_tree+0x25/0x30 vfs_get_tree+0x8d/0x2e0 path_mount+0x50f/0x1e50 do_mount+0x107/0x130 __se_sys_mount+0x1c5/0x2f0 __x64_sys_mount+0xc7/0x160 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 719: kasan_save_stack+0x23/0x60 __kasan_kmalloc.constprop.0+0x10b/0x120 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x1c0/0x870 jffs2_alloc_xattr_ref+0x2f/0xa0 jffs2_scan_medium.cold+0x3713/0x4794 jffs2_do_mount_fs.cold+0xa7/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] Freed by task 719: kmem_cache_free+0xcc/0x7b0 jffs2_free_xattr_ref+0x78/0x98 jffs2_clear_xattr_subsystem+0xa1/0x6ac jffs2_do_mount_fs.cold+0x5e6/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] The buggy address belongs to the object at ffff8881243384b8 which belongs to the cache jffs2_xattr_ref of size 48 The buggy address is located 40 bytes inside of 48-byte region [ffff8881243384b8, ffff8881243384e8) [...] ================================================================== The triggering of the BUG is shown in the following stack: ----------------------------------------------------------- jffs2_fill_super jffs2_do_fill_super jffs2_do_mount_fs jffs2_build_filesystem jffs2_scan_medium jffs2_scan_eraseblock <--- ERROR jffs2_clear_xattr_subsystem <--- free jffs2_clear_xattr_subsystem <--- free again ----------------------------------------------------------- An error is returned in jffs2_do_mount_fs(). If the error is returned by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to be executed. If the error is returned by jffs2_build_filesystem(), the jffs2_clear_xattr_subsystem() also does not need to be executed again. So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root' to fix this UAF problem. | Feb 26, 2025 |
| CVE-2021-47638(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ubifs: rename_whiteout: Fix double free for whiteout_ui->data 'whiteout_ui->data' will be freed twice if space budget fail for rename whiteout operation as following process: rename_whiteout dev = kmalloc whiteout_ui->data = dev kfree(whiteout_ui->data) // Free first time iput(whiteout) ubifs_free_inode kfree(ui->data) // Double free! KASAN reports: ================================================================== BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70 Call Trace: kfree+0x117/0x490 ubifs_free_inode+0x4f/0x70 [ubifs] i_callback+0x30/0x60 rcu_do_batch+0x366/0xac0 __do_softirq+0x133/0x57f Allocated by task 1506: kmem_cache_alloc_trace+0x3c2/0x7a0 do_rename+0x9b7/0x1150 [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 Freed by task 1506: kfree+0x117/0x490 do_rename.cold+0x53/0x8a [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 The buggy address belongs to the object at ffff88810238bed8 which belongs to the cache kmalloc-8 of size 8 ================================================================== Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode() -> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it (because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release', and the nlink of whiteout inode is 0). | Feb 26, 2025 |
| CVE-2021-47635(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix to add refcount once page is set private MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true. Otherwise, we may get a BUG in page migration: page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8 index:0xe2 pfn:0x14c12 aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e" flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0| zone=1|lastcpupid=0x1fffff) page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0) ------------[ cut here ]------------ kernel BUG at include/linux/page_ref.h:184! invalid opcode: 0000 [#1] SMP CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5 RIP: 0010:migrate_page_move_mapping+0xac3/0xe70 Call Trace: ubifs_migrate_page+0x22/0xc0 [ubifs] move_to_new_page+0xb4/0x600 migrate_pages+0x1523/0x1cc0 compact_zone+0x8c5/0x14b0 kcompactd+0x2bc/0x560 kthread+0x18c/0x1e0 ret_from_fork+0x1f/0x30 Before the time, we should make clean a concept, what does refcount means in page gotten from grab_cache_page_write_begin(). There are 2 situations: Situation 1: refcount is 3, page is created by __page_cache_alloc. TYPE_A - the write process is using this page TYPE_B - page is assigned to one certain mapping by calling __add_to_page_cache_locked() TYPE_C - page is added into pagevec list corresponding current cpu by calling lru_cache_add() Situation 2: refcount is 2, page is gotten from the mapping's tree TYPE_B - page has been assigned to one certain mapping TYPE_A - the write process is using this page (by calling page_cache_get_speculative()) Filesystem releases one refcount by calling put_page() in xxx_write_end(), the released refcount corresponds to TYPE_A (write task is using it). If there are any processes using a page, page migration process will skip the page by judging whether expected_page_refs() equals to page refcount. The BUG is caused by following process: PA(cpu 0) kcompactd(cpu 1) compact_zone ubifs_write_begin page_a = grab_cache_page_write_begin add_to_page_cache_lru lru_cache_add pagevec_add // put page into cpu 0's pagevec (refcnf = 3, for page creation process) ubifs_write_end SetPagePrivate(page_a) // doesn't increase page count ! unlock_page(page_a) put_page(page_a) // refcnt = 2 [...] PB(cpu 0) filemap_read filemap_get_pages add_to_page_cache_lru lru_cache_add __pagevec_lru_add // traverse all pages in cpu 0's pagevec __pagevec_lru_add_fn SetPageLRU(page_a) isolate_migratepages isolate_migratepages_block get_page_unless_zero(page_a) // refcnt = 3 list_add(page_a, from_list) migrate_pages(from_list) __unmap_and_move move_to_new_page ubifs_migrate_page(page_a) migrate_page_move_mapping expected_page_refs get 3 (migration[1] + mapping[1] + private[1]) release_pages put_page_testzero(page_a) // refcnt = 3 page_ref_freeze // refcnt = 0 page_ref_dec_and_test(0 - 1 = -1) page_ref_unfreeze VM_BUG_ON_PAGE(-1 != 0, page) UBIFS doesn't increase the page refcount after setting private flag, which leads to page migration task believes the page is not used by any other processes, so the page is migrated. This causes concurrent accessing on page refcount between put_page() called by other process(eg. read process calls lru_cache_add) and page_ref_unfreeze() called by mi ---truncated--- | Feb 26, 2025 |
| CVE-2024-53879(opens NVD record) | Low | 2.8 | NVIDIA CUDA toolkit for Linux and Windows contains a vulnerability in the cuobjdump binary, where a user could cause a crash by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53878(opens NVD record) | Low | 2.8 | NVIDIA CUDA toolkit for Linux and Windows contains a vulnerability in the cuobjdump binary, where a user could cause a crash by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53877(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the nvdisasm binary, where a user could cause a NULL pointer exception by passing a malformed ELF file to nvdisasm. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53876(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the nvdisasm binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to nvdisasm. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53875(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the cuobjdump binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53874(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the cuobjdump binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53873(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for Windows contains a vulnerability in the cuobjdump binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53872(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the cuobjdump binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53871(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the nvdisasm binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to nvdisasm. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2024-53870(opens NVD record) | Low | 3.3 | NVIDIA CUDA toolkit for all platforms contains a vulnerability in the cuobjdump binary, where a user could cause an out-of-bounds read by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. | Feb 25, 2025 |
| CVE-2025-26601(opens NVD record) | High | 7.8 | A use-after-free flaw was found in X.Org and Xwayland. When changing an alarm, the values of the change mask are evaluated one after the other, changing the trigger values as requested, and eventually, SyncInitTrigger() is called. If one of the changes triggers an error, the function will return early, not adding the new sync object, possibly causing a use-after-free when the alarm eventually triggers. | Feb 25, 2025 |
| CVE-2025-26600(opens NVD record) | High | 7.8 | A use-after-free flaw was found in X.Org and Xwayland. When a device is removed while still frozen, the events queued for that device remain while the device is freed. Replaying the events will cause a use-after-free. | Feb 25, 2025 |
| CVE-2025-26599(opens NVD record) | High | 7.8 | An access to an uninitialized pointer flaw was found in X.Org and Xwayland. The function compCheckRedirect() may fail if it cannot allocate the backing pixmap. In that case, compRedirectWindow() will return a BadAlloc error without validating the window tree marked just before, which leaves the validated data partly initialized and the use of an uninitialized pointer later. | Feb 25, 2025 |
| CVE-2025-26598(opens NVD record) | High | 7.8 | An out-of-bounds write flaw was found in X.Org and Xwayland. The function GetBarrierDevice() searches for the pointer device based on its device ID and returns the matching value, or supposedly NULL, if no match was found. However, the code will return the last element of the list if no matching device ID is found, which can lead to out-of-bounds memory access. | Feb 25, 2025 |
| CVE-2025-26597(opens NVD record) | High | 7.8 | A buffer overflow flaw was found in X.Org and Xwayland. If XkbChangeTypesOfKey() is called with a 0 group, it will resize the key symbols table to 0 but leave the key actions unchanged. If the same function is later called with a non-zero value of groups, this will cause a buffer overflow because the key actions are of the wrong size. | Feb 25, 2025 |
| CVE-2025-26596(opens NVD record) | High | 7.8 | A heap overflow flaw was found in X.Org and Xwayland. The computation of the length in XkbSizeKeySyms() differs from what is written in XkbWriteKeySyms(), which may lead to a heap-based buffer overflow. | Feb 25, 2025 |