Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
30,419 matching · page 61/609Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-46312(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: Set vma_flags in vb2_dma_sg_mmap vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops. gst-launch-1.0 v4l2src ! gtk4paintablesink [ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2 snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3 snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon apple_sart apple_dockchannel macsmc apple_rtkit_helper spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core spi_apple [ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram [ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full) [ 38.219040] Tainted: [W]=WARN [ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210 [ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210 [ 38.222178] sp : ffffc0008dc678e0 [ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480 [ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968 [ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0 [ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968 [ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8 [ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff [ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8 [ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000 [ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038 [ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb [ 38.231488] Call trace: [ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P) [ 38.232342] drm_gem_mmap+0x140/0x260 [ 38.232813] __mmap_region+0x488/0x9a0 [ 38.233277] mmap_region+0xd0/0x148 [ 38.233703] do_mmap+0x350/0x5c0 [ 38.234148] vm_mmap_pgoff+0x14c/0x200 [ 38.234612] ksys_mmap_pgoff+0x150/0x208 [ 38.235107] __arm64_sys_mmap+0x34/0x50 [ 38.235611] invoke_syscall+0x50/0x120 [ 38.236075] el0_svc_common.constprop.0+0x48/0xf0 [ 38.236680] do_el0_svc+0x24/0x38 [ 38.237113] el0_svc+0x38/0x168 [ 38.237507] el0t_64_sync_handler+0xa0/0xe8 [ 38.238034] el0t_64_sync+0x198/0x1a0 [ 38.238491] ---[ end trace 0000000000000000 ]--- There were discussions in [1] at the end of 2023 that mmap() on imported ---truncated--- | Jun 8, 2026 |
| CVE-2026-46311(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: fix access to stale wptr mapping Use drm_exec to take both locks i.e vm root bo and wptr_obj bo to access the mapping data properly. This fixes the security issue of unmap the wptr_obj while a queue creation is in progress and passing other bo at same address. (cherry picked from commit 1fc6c8ab45dbee096469c08c13f6099d57a52d6c) | Jun 8, 2026 |
| CVE-2026-46310(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: media: renesas: vsp1: Fix NULL pointer deref on module unload When unloading the module on gen 4, we hit a NULL pointer dereference. This is caused by the cleanup code calling vsp1_drm_cleanup() where it should be calling vsp1_vspx_cleanup(). Fix this by checking the IP version and calling the drm or vspx function accordingly, the same way as the init code does. | Jun 8, 2026 |
| CVE-2026-46309(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise Add validation in xe_vm_madvise_ioctl() to reject PAT indices with XE_COH_NONE coherency mode when applied to CPU cached memory. Using coh_none with CPU cached buffers is a security issue. When the kernel clears pages before reallocation, the clear operation stays in CPU cache (dirty). GPU with coh_none can bypass CPU caches and read stale sensitive data directly from DRAM, potentially leaking data from previously freed pages of other processes. This aligns with the existing validation in vm_bind path (xe_vm_bind_ioctl_validate_bo). v2(Matthew brost) - Add fixes - Move one debug print to better place v3(Matthew Auld) - Should be drm/xe/uapi - More Cc v4(Shuicheng Lin) - Fix kmem leak issues by the way v5 - Remove kmem leak because it has been merged by another patch v6 - Remove the fix which is not related to current fix v7 - No change v8 - Rebase v9 - Limit the restrictions to iGPU v10 - No change (cherry picked from commit 016ccdb674b8c899940b3944952c96a6a490d10a) | Jun 8, 2026 |
| CVE-2026-46308(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy() In scpsys_get_bus_protection_legacy(), of_find_node_with_property() returns a device node with its reference count incremented. The function then calls of_node_put(node) before checking whether syscon_regmap_lookup_by_phandle() returns an error. If an error occurs, dev_err_probe() dereferences the node pointer to print diagnostic information, but the node memory may have already been freed due to the earlier of_node_put(), leading to a use-after-free vulnerability. Fix this by moving the of_node_put() call after the error check, ensuring the node is still valid when accessed in the error path. | Jun 8, 2026 |
| CVE-2026-46307(opens NVD record) | High | 8.3 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath5k: do not access array OOB Vincent reports: > The ath5k driver seems to do an array-index-out-of-bounds access as > shown by the UBSAN kernel message: > UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20 > index 4 is out of range for type 'ieee80211_tx_rate [4]' > ... > Call Trace: > <TASK> > dump_stack_lvl+0x5d/0x80 > ubsan_epilogue+0x5/0x2b > __ubsan_handle_out_of_bounds.cold+0x46/0x4b > ath5k_tasklet_tx+0x4e0/0x560 [ath5k] > tasklet_action_common+0xb5/0x1c0 It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1; with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; while the size is: #define IEEE80211_TX_MAX_RATES 4 is indeed bogus. Set this 'idx = -1' sentinel only if the array index is less than the array size. As mac80211 will not look at rates beyond the size (IEEE80211_TX_MAX_RATES). Note: The effect of the OOB write is negligible. It just overwrites the next member of info->status, i.e. ack_signal. | Jun 8, 2026 |
| CVE-2026-46306(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: flow_dissector: do not dissect PPPoE PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the flow dissector driver has assumed an uncompressed frame until the blamed commit. During the review process of that commit [1], support for PFC is suggested. However, having a compressed (1-byte) protocol field means the subsequent PPP payload is shifted by one byte, causing 4-byte misalignment for the network header and an unaligned access exception on some architectures. The exception can be reproduced by sending a PPPoE PFC frame to an ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE session is active on that interface: $ 0 : 00000000 80c40000 00000000 85144817 $ 4 : 00000008 00000100 80a75758 81dc9bb8 $ 8 : 00000010 8087ae2c 0000003d 00000000 $12 : 000000e0 00000039 00000000 00000000 $16 : 85043240 80a75758 81dc9bb8 00006488 $20 : 0000002f 00000007 85144810 80a70000 $24 : 81d1bda0 00000000 $28 : 81dc8000 81dc9aa8 00000000 805ead08 Hi : 00009d51 Lo : 2163358a epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50 ra : 805ead08 __skb_get_hash_net+0x74/0x12c Status: 11000403 KERNEL EXL IE Cause : 40800010 (ExcCode 04) BadVA : 85144817 PrId : 0001992f (MIPS 1004Kc) Call Trace: [<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50 [<805ead08>] __skb_get_hash_net+0x74/0x12c [<805ef330>] get_rps_cpu+0x1b8/0x3fc [<805fca70>] netif_receive_skb_list_internal+0x324/0x364 [<805fd120>] napi_complete_done+0x68/0x2a4 [<8058de5c>] mtk_napi_rx+0x228/0xfec [<805fd398>] __napi_poll+0x3c/0x1c4 [<805fd754>] napi_threaded_poll_loop+0x234/0x29c [<805fd848>] napi_threaded_poll+0x8c/0xb0 [<80053544>] kthread+0x104/0x12c [<80002bd8>] ret_from_kernel_thread+0x14/0x1c Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000 To reduce the attack surface and maintain performance, do not process PPPoE PFC frames. [1] https://lore.kernel.org/r/20220630231016.GA392@debian.home | Jun 8, 2026 |
| CVE-2026-46305(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc The return value of kzalloc_flex() is used without ensuring that the allocation succeeded, and the pointer is dereferenced unconditionally. Guard the access to the allocated structure to avoid a potential NULL pointer dereference if the allocation fails. | Jun 8, 2026 |
| CVE-2026-46304(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] <TASK> [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 52 ---truncated--- | Jun 8, 2026 |
| CVE-2026-46303(opens NVD record) | High | 8.2 | In the Linux kernel, the following vulnerability has been resolved: isofs: validate Rock Ridge CE continuation extent against volume size rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice. | Jun 8, 2026 |
| CVE-2026-46302(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: selinux: allow multiple opens of /sys/fs/selinux/policy Currently there can only be a single open of /sys/fs/selinux/policy at any time. This allows any process to block any other process from reading the kernel policy. The original motivation seems to have been a mix of preventing an inconsistent view of the policy size and preventing userspace from allocating kernel memory without bound, but this is arguably equally bad. Eliminate the policy_opened flag and shrink the critical section that the policy mutex is held. While we are making changes here, drop a couple of extraneous BUG_ONs. | Jun 8, 2026 |
| CVE-2026-46301(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: spi: topcliff-pch: fix use-after-free on unbind Give the driver a chance to flush its queue before releasing the DMA buffers on driver unbind | Jun 8, 2026 |
| CVE-2026-46299(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix held lock freed on hfsplus_fill_super() hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We confirmed the bug by runtime testing under QEMU with x86_64 defconfig, lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we used GDB to dynamically shrink the max_unistr_len parameter to 1 before hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and exercises the faulty error path. The following warning was observed during mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b ---truncated--- | Jun 8, 2026 |
| CVE-2026-46298(opens NVD record) | Medium | 4.7 | In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Fix race with interrupt handler While executing ->ioctl handler or ->release handler, if an interrupt fires on the same cpu, then we can enter into a deadlock. This patch fixes both these handlers to take spin_lock_irq{save|restore} versions of the lock to prevent this deadlock. | Jun 8, 2026 |
| CVE-2026-46297(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: net: libwx: use request_irq for VF misc interrupt Currently, request_threaded_irq() is used with a primary handler but a NULL threaded handler, while also setting the IRQF_ONESHOT flag. This specific combination triggers a WARNING since the commit aef30c8d569c ("genirq: Warn about using IRQF_ONESHOT without a threaded handler"). WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760 Fix the issue by switching to request_irq(), which is the appropriate interface or a non-threaded interrupt handler, and removing the unnecessary IRQF_ONESHOT flag. | Jun 8, 2026 |
| CVE-2026-46296(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: spi: s3c64xx: fix NULL-deref on driver unbind A change moving DMA channel allocation from probe() back to s3c64xx_spi_prepare_transfer() failed to remove the corresponding deallocation from remove(). Drop the bogus DMA channel release from remove() to avoid triggering a NULL-pointer dereference on driver unbind. This issue was flagged by Sashiko when reviewing a controller deregistration fix. | Jun 8, 2026 |
| CVE-2026-46295(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty Fall back to apic_find_highest_vector() when PID.ON is set but PIR turns out to be empty, to correctly report the highest pending interrupt from the existing IRR. In a nested VM stress test, the following WARNING fires in vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending interrupt but the subsequent kvm_apic_has_interrupt() (which invokes vmx_sync_pir_to_irr() again) returns -1: WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel] Call Trace: kvm_check_and_inject_events vcpu_enter_guest.constprop.0 vcpu_run kvm_arch_vcpu_ioctl_run kvm_vcpu_ioctl __x64_sys_ioctl do_syscall_64 entry_SYSCALL_64_after_hwframe The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender performs two individually-atomic operations that are not a single transaction: 1. pi_test_and_set_pir(vector) -- sets the PIR bit 2. pi_test_and_set_on() -- sets PID.ON The following interleaving triggers the bug: Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr): B1: set PIR[vector] A1: pi_clear_on() A2: pi_harvest_pir() -> sees B1 bit A3: xchg() -> consumes bit, PIR=0 (1st sync returns correct max_irr) B2: set PID.ON = 1 Target vCPU (2nd sync_pir_to_irr): C1: pi_test_on() -> TRUE (from B2) C2: pi_clear_on() -> ON=0 C3: pi_harvest_pir() -> PIR empty C4: *max_irr = -1, early return IRR NOT SCANNED The interrupt is not lost (it resides in the IRR from the first sync and is recovered on the next vcpu_enter_guest() iteration), but the incorrect max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle. | Jun 8, 2026 |
| CVE-2026-46294(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally | Jun 8, 2026 |
| CVE-2026-46293(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: clk: microchip: mpfs-ccc: fix out of bounds access during output registration UBSAN reported an out of bounds access during registration of the last two outputs. This out of bounds access occurs because space is only allocated in the hws array for two PLLs and the four output dividers that each has, but the defined IDs contain two DLLS and their two outputs each, which are not supported by the driver. The ID order is PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs by two while adding them to the array to avoid the problem. | Jun 8, 2026 |
| CVE-2026-46292(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: core: Fix detach procedure for virtual devices in genpd If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach(). | Jun 8, 2026 |
| CVE-2026-46291(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - guard HMAC key hex dumps in hash_digest_key Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | Jun 8, 2026 |
| CVE-2026-46290(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: x86/efi: Fix graceful fault handling after FPU softirq changes Since commit d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin() calls fpregs_lock() which uses local_bh_disable() instead of the previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count during the entire EFI runtime service call, causing in_interrupt() to return true in normal task context. The graceful page fault handler efi_crash_gracefully_on_page_fault() uses in_interrupt() to bail out for faults in real interrupt context. With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI firmware page faults unhandled. This escalates to die() which also sees in_interrupt() as true and calls panic("Fatal exception in interrupt"), resulting in a hard system freeze. On systems with buggy firmware that triggers page faults during EFI runtime calls (e.g., accessing unmapped memory in GetTime()), this causes an unrecoverable hang instead of the expected graceful EFI_ABORTED recovery. Fix by replacing in_interrupt() with !in_task(). This preserves the original intent of bailing for interrupts or NMI faults, while no longer falsely triggering from the FPU code path's local_bh_disable(). [ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a window where a softirq may be taken before fpregs_lock() is called, but after efi_rts_work.efi_rts_id has been assigned, and any page faults occurring in that window will then be misidentified as having been caused by the firmware. Instead, use !in_task(), which incorporates in_serving_softirq(). ] | Jun 8, 2026 |
| CVE-2026-46289(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: lib/scatterlist: fix length calculations in extract_kvec_to_sg Patch series "Fix bugs in extract_iter_to_sg()", v3. Fix bugs in the kvec and user variants of extract_iter_to_sg. This series is growing due to useful remarks made by sashiko.dev. The main bugs are: - The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended. - When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist. The series adds test cases to the kunit_iov_iter test that demonstrate all of these bugs. Additionally, there is a memory leak fix for the test itself. The bugs were orignally introduced into kernel v6.3 where the function lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in v6.5. Thus the actual fix is only marked for backports to v6.5+. This patch (of 5): When extracting from a kvec to a scatterlist, do not cross page boundaries. The required length was already calculated but not used as intended. Adjust the copied length if the loop runs out of sglist entries without extracting everything. While there, return immediately from extract_iter_to_sg if there are no sglist entries at all. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary. | Jun 8, 2026 |
| CVE-2026-46288(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in of_unittest_changeset() The variable 'parent' is assigned the value of 'nchangeset' earlier in the function, meaning both point to the same struct device_node. The call to of_node_put(nchangeset) can decrement the reference count to zero and free the node if there are no other holders. After that, the code still uses 'parent' to check for the presence of a property and to read a string property, leading to a use-after-free. Fix this by moving the of_node_put() call after the last access to 'parent', avoiding the UAF. | Jun 8, 2026 |
| CVE-2026-46287(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix RTNL assertion warning when remove module For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | Jun 8, 2026 |
| CVE-2026-46286(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: leds: qcom-lpg: Check for array overflow when selecting the high resolution When selecting the high resolution values from the array, FIELD_GET() is used to pull from a 3 bit register, yet the array being indexed has only 5 values in it. Odds are the hardware is sane, but just to be safe, properly check before just overflowing and reading random data and then setting up chip values based on that. | Jun 8, 2026 |
| CVE-2026-46285(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mtd: docg3: fix use-after-free in docg3_release() In docg3_release(), the docg3 pointer is obtained from cascade->floors[0]->priv before the loop that calls doc_release_device() on each floor. doc_release_device() frees the docg3 struct via kfree(docg3) at line 1881. After the loop, docg3->cascade->bch dereferences the already-freed pointer. Fix this by accessing cascade->bch directly, which is equivalent since docg3->cascade points back to the same cascade struct, and is already available as a local variable. This also removes the now-unused docg3 local variable. | Jun 8, 2026 |
| CVE-2026-46284(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix early boot crash on parameters without '=' separator If hugepages, hugepagesz, or default_hugepagesz are specified on the kernel command line without the '=' separator, early parameter parsing passes NULL to hugetlb_add_param(), which dereferences it in strlen() and can crash the system during early boot. Reject NULL values in hugetlb_add_param() and return -EINVAL instead. | Jun 8, 2026 |
| CVE-2026-46283(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: tpm: Use kfree_sensitive() to free auth session in tpm_dev_release() tpm_dev_release() uses plain kfree() to free chip->auth, which contains sensitive cryptographic material including HMAC session keys, nonces, and passphrase data (struct tpm2_auth). Every other code path that frees this structure uses kfree_sensitive() to zero the memory before releasing it: both tpm2_end_auth_session() and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path is the only one that does not, leaving key material in freed slab memory until it is eventually overwritten. Use kfree_sensitive() for consistency with the rest of the driver and to ensure session keys are scrubbed during device teardown. | Jun 8, 2026 |
| CVE-2026-46282(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport. | Jun 8, 2026 |
| CVE-2026-46281(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix buffer overflow in vrealloc_node_align() Commit 4c5d3365882d ("mm/vmalloc: allow to set node and align in vrealloc") added the ability to force a new allocation if the current pointer is on the wrong NUMA node, or if an alignment constraint is not met, even if the user is shrinking the allocation. On this path (need_realloc), the code allocates a new object of 'size' bytes and then memcpy()s 'old_size' bytes into it. If the request is to shrink the object (size < old_size), this results in an out-of-bounds write on the new buffer. Fix this by bounding the copy length by the new allocation size. | Jun 8, 2026 |
| CVE-2026-46280(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration. | Jun 8, 2026 |
| CVE-2026-46279(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/alloc_tag: clear codetag for pages allocated before page_ext initialization Due to initialization ordering, page_ext is allocated and initialized relatively late during boot. Some pages have already been allocated and freed before page_ext becomes available, leaving their codetag uninitialized. A clear example is in init_section_page_ext(): alloc_page_ext() calls kmemleak_alloc(). If the slab cache has no free objects, it falls back to the buddy allocator to allocate memory. However, at this point page_ext is not yet fully initialized, so these newly allocated pages have no codetag set. These pages may later be reclaimed by KASAN, which causes the warning to trigger when they are freed because their codetag ref is still empty. Use a global array to track pages allocated before page_ext is fully initialized. The array size is fixed at 8192 entries, and will emit a warning if this limit is exceeded. When page_ext initialization completes, set their codetag to empty to avoid warnings when they are freed later. This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and mem_profiling_compressed disabled: [ 9.582133] ------------[ cut here ]------------ [ 9.582137] alloc_tag was not set [ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1 [ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy) [ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550 [ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7 [ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246 [ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c [ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460 [ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324 [ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00 [ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360 [ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000 [ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0 [ 9.582211] PKRU: 55555554 [ 9.582212] Call Trace: [ 9.582213] <TASK> [ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10 [ 9.582216] ? check_bytes_and_report+0x68/0x140 [ 9.582219] __free_frozen_pages+0x2e4/0x1150 [ 9.582221] ? __free_slab+0xc2/0x2b0 [ 9.582224] qlist_free_all+0x4c/0xf0 [ 9.582227] kasan_quarantine_reduce+0x15d/0x180 [ 9.582229] __kasan_slab_alloc+0x69/0x90 [ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500 [ 9.582234] do_getname+0x96/0x310 [ 9.582237] do_readlinkat+0x91/0x2f0 [ 9.582239] ? __pfx_do_readlinkat+0x10/0x10 [ 9.582240] ? get_random_bytes_user+0x1df/0x2c0 [ 9.582244] __x64_sys_readlinkat+0x96/0x100 [ 9.582246] do_syscall_64+0xce/0x650 [ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0 [ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10 [ 9.582254] ? do_syscall_64+0x114/0x650 [ 9.582255] ? ksys_read+0xfc/0x1d0 [ 9.582258] ? __pfx_ksys_read+0x10/0x10 [ 9.582260] ? do_syscall_64+0x114/0x650 [ 9.582262] ? do_syscall_64+0x114/0x650 [ 9.582264] ? __pfx_fput_close_sync+0x10/0x10 [ 9.582266] ? file_close_fd_locked+0x178/0x2a0 [ 9.582268] ? __x64_sys_faccessat2+0x96/0x100 [ 9.582269] ? __x64_sys_close+0x7d/0xd0 [ 9.582271] ? do_syscall_64+0x114/0x650 [ 9.582273] ? do_syscall_64+0x114/0x650 [ 9.582275] ? clear_bhb_loop+0x50/0xa0 [ 9.582277] ? clear_bhb_l ---truncated--- | Jun 8, 2026 |
| CVE-2026-46278(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix segfault when updating ftrace mask Fix invalid data access by passing right data for debugfs entry. [ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 171.559248] Mem abort info: [ 171.562173] ESR = 0x0000000096000044 [ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits [ 171.573108] SET = 0, FnV = 0 [ 171.576448] EA = 0, S1PTW = 0 [ 171.579745] FSC = 0x04: level 0 translation fault [ 171.584760] Data abort info: [ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000 [ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000 [ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP [ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm... [ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT [ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT) [ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr] [ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr] [ 171.689593] sp : ffff8000835ebb90 [ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000 [ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000 [ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000 [ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000 [ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580 [ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30 [ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff [ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a [ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010 [ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0 [ 171.764871] Call trace: [ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P) [ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c [ 171.778341] simple_attr_write+0x18/0x24 [ 171.782296] debugfs_attr_write+0x50/0x98 [ 171.786341] full_proxy_write+0x6c/0xa8 [ 171.790208] vfs_write+0xd4/0x350 [ 171.793561] ksys_write+0x70/0x108 [ 171.796995] __arm64_sys_write+0x1c/0x28 [ 171.800952] invoke_syscall+0x48/0x10c [ 171.804740] el0_svc_common.constprop.0+0x40/0xe0 [ 171.809487] do_el0_svc+0x1c/0x28 [ 171.812834] el0_svc+0x34/0x108 [ 171.816013] el0t_64_sync_handler+0xa0/0xe4 [ 171.820237] el0t_64_sync+0x198/0x19c [ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036) [ 171.830073] ---[ end trace 0000000000000000 ]--- | Jun 8, 2026 |
| CVE-2026-46277(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many(). | Jun 8, 2026 |
| CVE-2026-46276(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix zero-size GDS range init on RDNA4 RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory resources. The gfx_v12_0 initialisation code correctly leaves adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at zero to reflect this. amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for each of these resources regardless of size. When the size is zero, amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(), which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT. Guard against this by returning 0 early from amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM resource manager registration for hardware resources that are absent, without affecting any other GPU type. DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in the kernel config. This is apparently rarely enabled as these chips have been in the market for over a year and this issue was only reported now. Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html (cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) | Jun 8, 2026 |
| CVE-2026-11611(opens NVD record) | Medium | 6.5 | A flaw was found in 389 Directory Server. The Content Synchronization persistent search plugin allows unbounded memory growth when an authenticated client stops reading sync responses, enabling denial of service. Additional race conditions in plugin thread lifecycle can cause crashes during connection teardown or shutdown. | Jun 8, 2026 |
| CVE-2026-49975(opens NVD record) | High | 7.5 | Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests. This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67. | Jun 8, 2026 |
| CVE-2026-46275(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | Jun 8, 2026 |
| CVE-2026-46274(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: io-wq: check that the predecessor is hashed in io_wq_remove_pending() io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled work was the tail of its hash bucket. When doing this, it checks whether the preceding entry in acct->work_list has the same hash value, but never checks that the predecessor is hashed at all. io_get_work_hash() is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash bits are never set for non-hashed work, so it returns 0. Thus, when a hashed bucket-0 work is cancelled while a non-hashed work is its list predecessor, the check spuriously passes and a pointer to the non-hashed io_kiocb is stored in wq->hash_tail[0]. Because non-hashed work is dequeued via the fast path in io_get_next_work(), which never touches hash_tail[], the stale pointer is never cleared. Therefore, after the non-hashed io_kiocb completes and is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The io_wq is per-task (tctx->io_wq) and survives ring open/close, so the dangling pointer persists for the lifetime of the task; the next hashed bucket-0 enqueue dereferences it in io_wq_insert_work() and wq_list_add_after() writes through freed memory. Add the missing io_wq_is_hashed() check so a non-hashed predecessor never inherits a hash_tail[] slot. | Jun 8, 2026 |
| CVE-2025-71315(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs. | Jun 8, 2026 |
| CVE-2026-11577(opens NVD record) | Medium | — | Rejected reason: The reported behavior does not constitute a privilege escalation. Exploitation requires the attacker to already possess the manage-realm administrative role within the realm-management client. By design, the manage-realm role is intended to be equivalent in administrative authority to realm-admin. A user with manage-realm already has full administrative control over the realm. Therefore, importing users with realm-admin role mappings through POST /admin/realms/{realm}/partialImport does not grant any additional privileges beyond those already held by the administrator and does not represent a security vulnerability. | Jun 8, 2026 |
| CVE-2026-50751(opens NVD record) | Critical | 9.3 | A logic flow weakness in Remote Access and Mobile Access certificate validation in deprecated IKEv1 key exchange allows an unauthenticated remote attacker to bypass user authentication and establish a remote access VPN connection without a valid user password. | Jun 8, 2026 |
| CVE-2026-41724(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-41723(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-41722(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-25624(opens NVD record) | Medium | 5.7 | An administrative cross-site scripting (XSS) vulnerability exists in the web user interface dashboard layout of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Unvalidated user-supplied variables are echoed back to administrative profiles, facilitating vector payload processing behavior controls. | Jun 5, 2026 |
| CVE-2026-25623(opens NVD record) | Medium | 6.0 | An input validation command execution vulnerability exists in the browser management pipeline of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Authenticated administrators can leverage this exposure to obtain underlying terminal script code processing execution permissions. | Jun 5, 2026 |
| CVE-2026-25622(opens NVD record) | Medium | 6.0 | A Captive Portal Custom Handler command injection vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). On affected platforms, an administrative account logged into the user interface can exploit this input handling behavior to execute arbitrary platform shell commands. | Jun 5, 2026 |
| CVE-2026-25621(opens NVD record) | Medium | 6.0 | A Reports application infrastructure vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) due to insecure input validation. This issue uniquely affects version 17.4.0; earlier software releases are not exposed. | Jun 5, 2026 |