Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
14,469 matching · page 71/290Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2026-46296(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: spi: s3c64xx: fix NULL-deref on driver unbind A change moving DMA channel allocation from probe() back to s3c64xx_spi_prepare_transfer() failed to remove the corresponding deallocation from remove(). Drop the bogus DMA channel release from remove() to avoid triggering a NULL-pointer dereference on driver unbind. This issue was flagged by Sashiko when reviewing a controller deregistration fix. | Jun 8, 2026 |
| CVE-2026-46295(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Do IRR scan in __kvm_apic_update_irr even if PIR is empty Fall back to apic_find_highest_vector() when PID.ON is set but PIR turns out to be empty, to correctly report the highest pending interrupt from the existing IRR. In a nested VM stress test, the following WARNING fires in vmx_check_nested_events() when kvm_cpu_has_interrupt() reports a pending interrupt but the subsequent kvm_apic_has_interrupt() (which invokes vmx_sync_pir_to_irr() again) returns -1: WARNING: CPU: 99 PID: 57767 at arch/x86/kvm/vmx/nested.c:4449 vmx_check_nested_events+0x6bf/0x6e0 [kvm_intel] Call Trace: kvm_check_and_inject_events vcpu_enter_guest.constprop.0 vcpu_run kvm_arch_vcpu_ioctl_run kvm_vcpu_ioctl __x64_sys_ioctl do_syscall_64 entry_SYSCALL_64_after_hwframe The root cause is a race between vmx_sync_pir_to_irr() on the target vCPU and __vmx_deliver_posted_interrupt() on a sender vCPU. The sender performs two individually-atomic operations that are not a single transaction: 1. pi_test_and_set_pir(vector) -- sets the PIR bit 2. pi_test_and_set_on() -- sets PID.ON The following interleaving triggers the bug: Sender vCPU (IPI): Target vCPU (1st sync_pir_to_irr): B1: set PIR[vector] A1: pi_clear_on() A2: pi_harvest_pir() -> sees B1 bit A3: xchg() -> consumes bit, PIR=0 (1st sync returns correct max_irr) B2: set PID.ON = 1 Target vCPU (2nd sync_pir_to_irr): C1: pi_test_on() -> TRUE (from B2) C2: pi_clear_on() -> ON=0 C3: pi_harvest_pir() -> PIR empty C4: *max_irr = -1, early return IRR NOT SCANNED The interrupt is not lost (it resides in the IRR from the first sync and is recovered on the next vcpu_enter_guest() iteration), but the incorrect max_irr causes a spurious WARNING and a wasted L2 VM-Enter/VM-Exit cycle. | Jun 8, 2026 |
| CVE-2026-46294(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally | Jun 8, 2026 |
| CVE-2026-46293(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: clk: microchip: mpfs-ccc: fix out of bounds access during output registration UBSAN reported an out of bounds access during registration of the last two outputs. This out of bounds access occurs because space is only allocated in the hws array for two PLLs and the four output dividers that each has, but the defined IDs contain two DLLS and their two outputs each, which are not supported by the driver. The ID order is PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs by two while adding them to the array to avoid the problem. | Jun 8, 2026 |
| CVE-2026-46292(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: pmdomain: core: Fix detach procedure for virtual devices in genpd If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach(). | Jun 8, 2026 |
| CVE-2026-46291(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - guard HMAC key hex dumps in hash_digest_key Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | Jun 8, 2026 |
| CVE-2026-46290(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: x86/efi: Fix graceful fault handling after FPU softirq changes Since commit d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin() calls fpregs_lock() which uses local_bh_disable() instead of the previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count during the entire EFI runtime service call, causing in_interrupt() to return true in normal task context. The graceful page fault handler efi_crash_gracefully_on_page_fault() uses in_interrupt() to bail out for faults in real interrupt context. With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI firmware page faults unhandled. This escalates to die() which also sees in_interrupt() as true and calls panic("Fatal exception in interrupt"), resulting in a hard system freeze. On systems with buggy firmware that triggers page faults during EFI runtime calls (e.g., accessing unmapped memory in GetTime()), this causes an unrecoverable hang instead of the expected graceful EFI_ABORTED recovery. Fix by replacing in_interrupt() with !in_task(). This preserves the original intent of bailing for interrupts or NMI faults, while no longer falsely triggering from the FPU code path's local_bh_disable(). [ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a window where a softirq may be taken before fpregs_lock() is called, but after efi_rts_work.efi_rts_id has been assigned, and any page faults occurring in that window will then be misidentified as having been caused by the firmware. Instead, use !in_task(), which incorporates in_serving_softirq(). ] | Jun 8, 2026 |
| CVE-2026-46289(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: lib/scatterlist: fix length calculations in extract_kvec_to_sg Patch series "Fix bugs in extract_iter_to_sg()", v3. Fix bugs in the kvec and user variants of extract_iter_to_sg. This series is growing due to useful remarks made by sashiko.dev. The main bugs are: - The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended. - When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist. The series adds test cases to the kunit_iov_iter test that demonstrate all of these bugs. Additionally, there is a memory leak fix for the test itself. The bugs were orignally introduced into kernel v6.3 where the function lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in v6.5. Thus the actual fix is only marked for backports to v6.5+. This patch (of 5): When extracting from a kvec to a scatterlist, do not cross page boundaries. The required length was already calculated but not used as intended. Adjust the copied length if the loop runs out of sglist entries without extracting everything. While there, return immediately from extract_iter_to_sg if there are no sglist entries at all. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary. | Jun 8, 2026 |
| CVE-2026-46288(opens NVD record) | High | 8.4 | In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in of_unittest_changeset() The variable 'parent' is assigned the value of 'nchangeset' earlier in the function, meaning both point to the same struct device_node. The call to of_node_put(nchangeset) can decrement the reference count to zero and free the node if there are no other holders. After that, the code still uses 'parent' to check for the presence of a property and to read a string property, leading to a use-after-free. Fix this by moving the of_node_put() call after the last access to 'parent', avoiding the UAF. | Jun 8, 2026 |
| CVE-2026-46287(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix RTNL assertion warning when remove module For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | Jun 8, 2026 |
| CVE-2026-46286(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: leds: qcom-lpg: Check for array overflow when selecting the high resolution When selecting the high resolution values from the array, FIELD_GET() is used to pull from a 3 bit register, yet the array being indexed has only 5 values in it. Odds are the hardware is sane, but just to be safe, properly check before just overflowing and reading random data and then setting up chip values based on that. | Jun 8, 2026 |
| CVE-2026-46285(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mtd: docg3: fix use-after-free in docg3_release() In docg3_release(), the docg3 pointer is obtained from cascade->floors[0]->priv before the loop that calls doc_release_device() on each floor. doc_release_device() frees the docg3 struct via kfree(docg3) at line 1881. After the loop, docg3->cascade->bch dereferences the already-freed pointer. Fix this by accessing cascade->bch directly, which is equivalent since docg3->cascade points back to the same cascade struct, and is already available as a local variable. This also removes the now-unused docg3 local variable. | Jun 8, 2026 |
| CVE-2026-46284(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix early boot crash on parameters without '=' separator If hugepages, hugepagesz, or default_hugepagesz are specified on the kernel command line without the '=' separator, early parameter parsing passes NULL to hugetlb_add_param(), which dereferences it in strlen() and can crash the system during early boot. Reject NULL values in hugetlb_add_param() and return -EINVAL instead. | Jun 8, 2026 |
| CVE-2026-46283(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: tpm: Use kfree_sensitive() to free auth session in tpm_dev_release() tpm_dev_release() uses plain kfree() to free chip->auth, which contains sensitive cryptographic material including HMAC session keys, nonces, and passphrase data (struct tpm2_auth). Every other code path that frees this structure uses kfree_sensitive() to zero the memory before releasing it: both tpm2_end_auth_session() and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path is the only one that does not, leaving key material in freed slab memory until it is eventually overwritten. Use kfree_sensitive() for consistency with the rest of the driver and to ensure session keys are scrubbed during device teardown. | Jun 8, 2026 |
| CVE-2026-46282(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport. | Jun 8, 2026 |
| CVE-2026-46281(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix buffer overflow in vrealloc_node_align() Commit 4c5d3365882d ("mm/vmalloc: allow to set node and align in vrealloc") added the ability to force a new allocation if the current pointer is on the wrong NUMA node, or if an alignment constraint is not met, even if the user is shrinking the allocation. On this path (need_realloc), the code allocates a new object of 'size' bytes and then memcpy()s 'old_size' bytes into it. If the request is to shrink the object (size < old_size), this results in an out-of-bounds write on the new buffer. Fix this by bounding the copy length by the new allocation size. | Jun 8, 2026 |
| CVE-2026-46280(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration. | Jun 8, 2026 |
| CVE-2026-46279(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/alloc_tag: clear codetag for pages allocated before page_ext initialization Due to initialization ordering, page_ext is allocated and initialized relatively late during boot. Some pages have already been allocated and freed before page_ext becomes available, leaving their codetag uninitialized. A clear example is in init_section_page_ext(): alloc_page_ext() calls kmemleak_alloc(). If the slab cache has no free objects, it falls back to the buddy allocator to allocate memory. However, at this point page_ext is not yet fully initialized, so these newly allocated pages have no codetag set. These pages may later be reclaimed by KASAN, which causes the warning to trigger when they are freed because their codetag ref is still empty. Use a global array to track pages allocated before page_ext is fully initialized. The array size is fixed at 8192 entries, and will emit a warning if this limit is exceeded. When page_ext initialization completes, set their codetag to empty to avoid warnings when they are freed later. This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and mem_profiling_compressed disabled: [ 9.582133] ------------[ cut here ]------------ [ 9.582137] alloc_tag was not set [ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1 [ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy) [ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550 [ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7 [ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246 [ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c [ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460 [ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324 [ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00 [ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360 [ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000 [ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0 [ 9.582211] PKRU: 55555554 [ 9.582212] Call Trace: [ 9.582213] <TASK> [ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10 [ 9.582216] ? check_bytes_and_report+0x68/0x140 [ 9.582219] __free_frozen_pages+0x2e4/0x1150 [ 9.582221] ? __free_slab+0xc2/0x2b0 [ 9.582224] qlist_free_all+0x4c/0xf0 [ 9.582227] kasan_quarantine_reduce+0x15d/0x180 [ 9.582229] __kasan_slab_alloc+0x69/0x90 [ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500 [ 9.582234] do_getname+0x96/0x310 [ 9.582237] do_readlinkat+0x91/0x2f0 [ 9.582239] ? __pfx_do_readlinkat+0x10/0x10 [ 9.582240] ? get_random_bytes_user+0x1df/0x2c0 [ 9.582244] __x64_sys_readlinkat+0x96/0x100 [ 9.582246] do_syscall_64+0xce/0x650 [ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0 [ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10 [ 9.582254] ? do_syscall_64+0x114/0x650 [ 9.582255] ? ksys_read+0xfc/0x1d0 [ 9.582258] ? __pfx_ksys_read+0x10/0x10 [ 9.582260] ? do_syscall_64+0x114/0x650 [ 9.582262] ? do_syscall_64+0x114/0x650 [ 9.582264] ? __pfx_fput_close_sync+0x10/0x10 [ 9.582266] ? file_close_fd_locked+0x178/0x2a0 [ 9.582268] ? __x64_sys_faccessat2+0x96/0x100 [ 9.582269] ? __x64_sys_close+0x7d/0xd0 [ 9.582271] ? do_syscall_64+0x114/0x650 [ 9.582273] ? do_syscall_64+0x114/0x650 [ 9.582275] ? clear_bhb_loop+0x50/0xa0 [ 9.582277] ? clear_bhb_l ---truncated--- | Jun 8, 2026 |
| CVE-2026-46278(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix segfault when updating ftrace mask Fix invalid data access by passing right data for debugfs entry. [ 171.549793] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 171.559248] Mem abort info: [ 171.562173] ESR = 0x0000000096000044 [ 171.566227] EC = 0x25: DABT (current EL), IL = 32 bits [ 171.573108] SET = 0, FnV = 0 [ 171.576448] EA = 0, S1PTW = 0 [ 171.579745] FSC = 0x04: level 0 translation fault [ 171.584760] Data abort info: [ 171.588012] ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000 [ 171.593734] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 171.598962] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 171.604471] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000083837000 [ 171.611358] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 171.618500] Internal error: Oops: 0000000096000044 [#1] SMP [ 171.624222] Modules linked in: powervr drm_shmem_helper drm_gpuvm... [ 171.656580] CPU: 0 UID: 0 PID: 549 Comm: bash Not tainted 7.0.0-rc2-g730b257ba723-dirty #13 PREEMPT [ 171.665773] Hardware name: BeagleBoard.org BeaglePlay (DT) [ 171.671296] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 171.678306] pc : pvr_fw_trace_mask_set+0x78/0x154 [powervr] [ 171.683959] lr : pvr_fw_trace_mask_set+0x4c/0x154 [powervr] [ 171.689593] sp : ffff8000835ebb90 [ 171.692929] x29: ffff8000835ebc00 x28: ffff000005c60f80 x27: 0000000000000000 [ 171.700130] x26: 0000000000000000 x25: ffff00000504af28 x24: 0000000000000000 [ 171.707324] x23: ffff00000504af50 x22: 0000000000000203 x21: 0000000000000000 [ 171.714518] x20: ffff000005c44a80 x19: ffff000005c457b8 x18: 0000000000000000 [ 171.721715] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaae8887580 [ 171.728908] x14: 0000000000000000 x13: 0000000000000000 x12: ffff8000835ebc30 [ 171.736095] x11: ffff00000504af2a x10: ffff00008504af29 x9 : 0fffffffffffffff [ 171.743286] x8 : ffff8000835ebbf8 x7 : 0000000000000000 x6 : 000000000000002a [ 171.750479] x5 : ffff00000504af2e x4 : 0000000000000000 x3 : 0000000000000010 [ 171.757674] x2 : 0000000000000203 x1 : 0000000000000000 x0 : ffff8000835ebba0 [ 171.764871] Call trace: [ 171.767342] pvr_fw_trace_mask_set+0x78/0x154 [powervr] (P) [ 171.772984] simple_attr_write_xsigned.isra.0+0xe0/0x19c [ 171.778341] simple_attr_write+0x18/0x24 [ 171.782296] debugfs_attr_write+0x50/0x98 [ 171.786341] full_proxy_write+0x6c/0xa8 [ 171.790208] vfs_write+0xd4/0x350 [ 171.793561] ksys_write+0x70/0x108 [ 171.796995] __arm64_sys_write+0x1c/0x28 [ 171.800952] invoke_syscall+0x48/0x10c [ 171.804740] el0_svc_common.constprop.0+0x40/0xe0 [ 171.809487] do_el0_svc+0x1c/0x28 [ 171.812834] el0_svc+0x34/0x108 [ 171.816013] el0t_64_sync_handler+0xa0/0xe4 [ 171.820237] el0t_64_sync+0x198/0x19c [ 171.823939] Code: 32000262 b90ac293 1a931056 9134e293 (b9000036) [ 171.830073] ---[ end trace 0000000000000000 ]--- | Jun 8, 2026 |
| CVE-2026-46277(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many(). | Jun 8, 2026 |
| CVE-2026-46276(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix zero-size GDS range init on RDNA4 RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory resources. The gfx_v12_0 initialisation code correctly leaves adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at zero to reflect this. amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for each of these resources regardless of size. When the size is zero, amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(), which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT. Guard against this by returning 0 early from amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM resource manager registration for hardware resources that are absent, without affecting any other GPU type. DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in the kernel config. This is apparently rarely enabled as these chips have been in the market for over a year and this issue was only reported now. Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html (cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) | Jun 8, 2026 |
| CVE-2026-11611(opens NVD record) | Medium | 6.5 | A flaw was found in 389 Directory Server. The Content Synchronization persistent search plugin allows unbounded memory growth when an authenticated client stops reading sync responses, enabling denial of service. Additional race conditions in plugin thread lifecycle can cause crashes during connection teardown or shutdown. | Jun 8, 2026 |
| CVE-2026-49975(opens NVD record) | High | 7.5 | Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests. This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67. | Jun 8, 2026 |
| CVE-2026-46275(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | Jun 8, 2026 |
| CVE-2026-46274(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: io-wq: check that the predecessor is hashed in io_wq_remove_pending() io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled work was the tail of its hash bucket. When doing this, it checks whether the preceding entry in acct->work_list has the same hash value, but never checks that the predecessor is hashed at all. io_get_work_hash() is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash bits are never set for non-hashed work, so it returns 0. Thus, when a hashed bucket-0 work is cancelled while a non-hashed work is its list predecessor, the check spuriously passes and a pointer to the non-hashed io_kiocb is stored in wq->hash_tail[0]. Because non-hashed work is dequeued via the fast path in io_get_next_work(), which never touches hash_tail[], the stale pointer is never cleared. Therefore, after the non-hashed io_kiocb completes and is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The io_wq is per-task (tctx->io_wq) and survives ring open/close, so the dangling pointer persists for the lifetime of the task; the next hashed bucket-0 enqueue dereferences it in io_wq_insert_work() and wq_list_add_after() writes through freed memory. Add the missing io_wq_is_hashed() check so a non-hashed predecessor never inherits a hash_tail[] slot. | Jun 8, 2026 |
| CVE-2025-71315(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs. | Jun 8, 2026 |
| CVE-2026-11577(opens NVD record) | Medium | — | Rejected reason: The reported behavior does not constitute a privilege escalation. Exploitation requires the attacker to already possess the manage-realm administrative role within the realm-management client. By design, the manage-realm role is intended to be equivalent in administrative authority to realm-admin. A user with manage-realm already has full administrative control over the realm. Therefore, importing users with realm-admin role mappings through POST /admin/realms/{realm}/partialImport does not grant any additional privileges beyond those already held by the administrator and does not represent a security vulnerability. | Jun 8, 2026 |
| CVE-2026-50751(opens NVD record) | Critical | 9.3 | A logic flow weakness in Remote Access and Mobile Access certificate validation in deprecated IKEv1 key exchange allows an unauthenticated remote attacker to bypass user authentication and establish a remote access VPN connection without a valid user password. | Jun 8, 2026 |
| CVE-2026-41724(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-41723(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-41722(opens NVD record) | High | 8.0 | VMware Cloud Foundation Operations contains multiple stored cross-site scripting vulnerabilities.A malicious actor with privileges to create policies, views or text-widgets may be able to inject scripts to perform administrative actions in VMware Cloud Foundation Operations. | Jun 8, 2026 |
| CVE-2026-25624(opens NVD record) | Medium | 5.7 | An administrative cross-site scripting (XSS) vulnerability exists in the web user interface dashboard layout of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Unvalidated user-supplied variables are echoed back to administrative profiles, facilitating vector payload processing behavior controls. | Jun 5, 2026 |
| CVE-2026-25623(opens NVD record) | Medium | 6.0 | An input validation command execution vulnerability exists in the browser management pipeline of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). Authenticated administrators can leverage this exposure to obtain underlying terminal script code processing execution permissions. | Jun 5, 2026 |
| CVE-2026-25622(opens NVD record) | Medium | 6.0 | A Captive Portal Custom Handler command injection vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). On affected platforms, an administrative account logged into the user interface can exploit this input handling behavior to execute arbitrary platform shell commands. | Jun 5, 2026 |
| CVE-2026-25621(opens NVD record) | Medium | 6.0 | A Reports application infrastructure vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) due to insecure input validation. This issue uniquely affects version 17.4.0; earlier software releases are not exposed. | Jun 5, 2026 |
| CVE-2026-25620(opens NVD record) | Medium | 6.0 | An encrypted password command injection vulnerability exists in the Captive Portal application framework of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). This issue uniquely affects version 17.4.0; earlier software releases are not exposed. | Jun 5, 2026 |
| CVE-2026-7473(opens NVD record) | Medium | 5.8 | On affected platforms running Arista EOS where a tunnel decapsulation configuration—such as VXLAN (Virtual Extensible LAN), decap-groups, or a GRE (Generic Routing Encapsulation) tunnel interface—is present, the switch will incorrectly decapsulate and forward other unexpected tunneled packet with a destination IP matching its configured decapsulation IP. This occurs because the switch does not verify the tunnel protocol type, potentially leading to the unexpected processing of non-configured tunnel traffic. This issue has been reported as being exploited in the wild. | Jun 5, 2026 |
| CVE-2026-50264(opens NVD record) | High | 7.8 | An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50263(opens NVD record) | Medium | 5.5 | A use-after-free flaw was found in the X.Org X server and Xwayland in CreateSaverWindow(). A client can trigger a use-after-free read after changing window attributes and forcing the screen saver, leading to information disclosure. | Jun 5, 2026 |
| CVE-2026-50262(opens NVD record) | Medium | 5.5 | An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default. | Jun 5, 2026 |
| CVE-2026-50261(opens NVD record) | High | 7.8 | A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50260(opens NVD record) | High | 7.8 | A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50259(opens NVD record) | High | 7.8 | A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50258(opens NVD record) | High | 7.8 | A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. The X server has multiple stack buffers sized XkbMaxShiftLevel * XkbNumKbdGroups but CheckKeyTypes() does not verify or clamp non-canonical key types to XkbMaxShiftLevel. A client can change key types to excessive shift levels and trigger stack overflows. This is caused by an incomplete fix of CVE-2025-26597. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50257(opens NVD record) | High | 7.8 | A use-after-free flaw was found in the X.Org X server and Xwayland in miSyncDestroyFence(). A client that sets up multiple fence triggers can trigger a use-after-free function pointer call. An attacker would connect to the X server to set up a fence and await that fence, then a second X connection destroys the fence, causing the use-after-free. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-50256(opens NVD record) | High | 7.8 | A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root. | Jun 5, 2026 |
| CVE-2026-11332(opens NVD record) | High | 7.8 | A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install. | Jun 5, 2026 |
| CVE-2026-41567(opens NVD record) | High | 7.2 | Moby is an open source container framework. In versions prior to 29.5.1 and in moby/moby v2 prior to v2.0.0-beta.14, when a compressed archive is uploaded to a container via `PUT /containers/{id}/archive` or piped through `docker cp -`, the daemon resolves decompression binaries (such as `xz` or `unpigz`) from the container's filesystem rather than the host's due to incorrect ordering of operations. A malicious container image containing a trojanized decompression binary can achieve arbitrary code execution with full daemon privileges, including host root UID and unrestricted capabilities, when a user uploads a compressed (xz or gzip) archive into that container. This issue is fixed in Docker Engine 29.5.1 and moby/moby v2.0.0-beta.14. Workarounds include only running containers from trusted images, using authorization plugins to restrict access to the `PUT /containers/{id}/archive` endpoint, and avoiding piping compressed archives into containers created from untrusted images | Jun 5, 2026 |
| CVE-2026-50589(opens NVD record) | Medium | 5.3 | In OpenStack Ironic 32 before 37.0.0, an unauthenticated malicious user could submit a crafted JSON string to some endpoints on the API or JSON-RPC service and effect a service crash. | Jun 5, 2026 |
| CVE-2026-11309(opens NVD record) | Medium | 4.3 | Insufficient policy enforcement in History in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) | Jun 5, 2026 |