Search
CVE Explorer
Search the full tracked CVE corpus across every vendor — by keyword, vendor, severity, CVSS band and publication date. Server-rendered; each filtered view has its own URL.
01
Filters
Submit to refine — state is held in the URL.
02
Results
62,958 matching · page 939/1260Each CVE id links to its NVD record.
| CVE | Severity | CVSS | Summary | Published |
|---|---|---|---|---|
| CVE-2022-48771(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. | Jun 20, 2024 |
| CVE-2022-48762(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: arm64: extable: fix load_unaligned_zeropad() reg indices In ex_handler_load_unaligned_zeropad() we erroneously extract the data and addr register indices from ex->type rather than ex->data. As ex->type will contain EX_TYPE_LOAD_UNALIGNED_ZEROPAD (i.e. 4): * We'll always treat X0 as the address register, since EX_DATA_REG_ADDR is extracted from bits [9:5]. Thus, we may attempt to dereference an arbitrary address as X0 may hold an arbitrary value. * We'll always treat X4 as the data register, since EX_DATA_REG_DATA is extracted from bits [4:0]. Thus we will corrupt X4 and cause arbitrary behaviour within load_unaligned_zeropad() and its caller. Fix this by extracting both values from ex->data as originally intended. On an MTE-enabled QEMU image we are hitting the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: fixup_exception+0xc4/0x108 __do_kernel_fault+0x3c/0x268 do_tag_check_fault+0x3c/0x104 do_mem_abort+0x44/0xf4 el1_abort+0x40/0x64 el1h_64_sync_handler+0x60/0xa0 el1h_64_sync+0x7c/0x80 link_path_walk+0x150/0x344 path_openat+0xa0/0x7dc do_filp_open+0xb8/0x168 do_sys_openat2+0x88/0x17c __arm64_sys_openat+0x74/0xa0 invoke_syscall+0x48/0x148 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0x88 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Code: f8695a69 71007d1f 540000e0 927df12a (f940014a) | Jun 20, 2024 |
| CVE-2022-48759(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). | Jun 20, 2024 |
| CVE-2022-48754(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). | Jun 20, 2024 |
| CVE-2022-48751(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Transitional solution for clcsock race issue We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. | Jun 20, 2024 |
| CVE-2022-48744(opens NVD record) | High | 7.5 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). | Jun 20, 2024 |
| CVE-2022-48743(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: net: amd-xgbe: Fix skb data length underflow There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. | Jun 20, 2024 |
| CVE-2022-48742(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. | Jun 20, 2024 |
| CVE-2022-48739(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. | Jun 20, 2024 |
| CVE-2022-48735(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix UAF of leds class devs at unbinding The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec. | Jun 20, 2024 |
| CVE-2022-48733(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. | Jun 20, 2024 |
| CVE-2022-48729(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix panic with larger ipoib send_queue_size When the ipoib send_queue_size is increased from the default the following panic happens: RIP: 0010:hfi1_ipoib_drain_tx_ring+0x45/0xf0 [hfi1] Code: 31 e4 eb 0f 8b 85 c8 02 00 00 41 83 c4 01 44 39 e0 76 60 8b 8d cc 02 00 00 44 89 e3 be 01 00 00 00 d3 e3 48 03 9d c0 02 00 00 <c7> 83 18 01 00 00 00 00 00 00 48 8b bb 30 01 00 00 e8 25 af a7 e0 RSP: 0018:ffffc9000798f4a0 EFLAGS: 00010286 RAX: 0000000000008000 RBX: ffffc9000aa0f000 RCX: 000000000000000f RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88810ff08000 R08: ffff88889476d900 R09: 0000000000000101 R10: 0000000000000000 R11: ffffc90006590ff8 R12: 0000000000000200 R13: ffffc9000798fba8 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fd0f79cc3c0(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000aa0f118 CR3: 0000000889c84001 CR4: 00000000001706e0 Call Trace: <TASK> hfi1_ipoib_napi_tx_disable+0x45/0x60 [hfi1] hfi1_ipoib_dev_stop+0x18/0x80 [hfi1] ipoib_ib_dev_stop+0x1d/0x40 [ib_ipoib] ipoib_stop+0x48/0xc0 [ib_ipoib] __dev_close_many+0x9e/0x110 __dev_change_flags+0xd9/0x210 dev_change_flags+0x21/0x60 do_setlink+0x31c/0x10f0 ? __nla_validate_parse+0x12d/0x1a0 ? __nla_parse+0x21/0x30 ? inet6_validate_link_af+0x5e/0xf0 ? cpumask_next+0x1f/0x20 ? __snmp6_fill_stats64.isra.53+0xbb/0x140 ? __nla_validate_parse+0x47/0x1a0 __rtnl_newlink+0x530/0x910 ? pskb_expand_head+0x73/0x300 ? __kmalloc_node_track_caller+0x109/0x280 ? __nla_put+0xc/0x20 ? cpumask_next_and+0x20/0x30 ? update_sd_lb_stats.constprop.144+0xd3/0x820 ? _raw_spin_unlock_irqrestore+0x25/0x37 ? __wake_up_common_lock+0x87/0xc0 ? kmem_cache_alloc_trace+0x3d/0x3d0 rtnl_newlink+0x43/0x60 The issue happens when the shift that should have been a function of the txq item size mistakenly used the ring size. Fix by using the item size. | Jun 20, 2024 |
| CVE-2022-48727(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Avoid consuming a stale esr value when SError occur When any exception other than an IRQ occurs, the CPU updates the ESR_EL2 register with the exception syndrome. An SError may also become pending, and will be synchronised by KVM. KVM notes the exception type, and whether an SError was synchronised in exit_code. When an exception other than an IRQ occurs, fixup_guest_exit() updates vcpu->arch.fault.esr_el2 from the hardware register. When an SError was synchronised, the vcpu esr value is used to determine if the exception was due to an HVC. If so, ELR_EL2 is moved back one instruction. This is so that KVM can process the SError first, and re-execute the HVC if the guest survives the SError. But if an IRQ synchronises an SError, the vcpu's esr value is stale. If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2, causing an unrelated guest instruction to be executed twice. Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't update this register so don't need to check. | Jun 20, 2024 |
| CVE-2022-48726(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Protect mc during concurrent multicast leaves Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. | Jun 20, 2024 |
| CVE-2022-48721(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net/smc: Forward wakeup to smc socket waitqueue after fallback When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries. | Jun 20, 2024 |
| CVE-2022-48720(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. | Jun 20, 2024 |
| CVE-2022-48717(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: ASoC: max9759: fix underflow in speaker_gain_control_put() Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via: -> snd_ctl_elem_write_user() -> snd_ctl_elem_write() -> kctl->put() | Jun 20, 2024 |
| CVE-2022-48716(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd938x: fix incorrect used of portid Mixer controls have the channel id in mixer->reg, which is not same as port id. port id should be derived from chan_info array. So fix this. Without this, its possible that we could corrupt struct wcd938x_sdw_priv by accessing port_map array out of range with channel id instead of port id. | Jun 20, 2024 |
| CVE-2022-48711(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: tipc: improve size validations for received domain records The function tipc_mon_rcv() allows a node to receive and process domain_record structs from peer nodes to track their views of the network topology. This patch verifies that the number of members in a received domain record does not exceed the limit defined by MAX_MON_DOMAIN, something that may otherwise lead to a stack overflow. tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where we are reading a 32 bit message data length field into a uint16. To avert any risk of bit overflow, we add an extra sanity check for this in that function. We cannot see that happen with the current code, but future designers being unaware of this risk, may introduce it by allowing delivery of very large (> 64k) sk buffers from the bearer layer. This potential problem was identified by Eric Dumazet. This fixes CVE-2022-0435 | Jun 20, 2024 |
| CVE-2021-47620(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: refactor malicious adv data check Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced. | Jun 20, 2024 |
| CVE-2024-29013(opens NVD record) | Medium | 6.5 | Heap-based buffer overflow vulnerability in the SonicOS SSL-VPN allows an authenticated remote attacker to cause Denial of Service (DoS) via memcpy function. | Jun 20, 2024 |
| CVE-2024-29012(opens NVD record) | High | 7.5 | Stack-based buffer overflow vulnerability in the SonicOS HTTP server allows an authenticated remote attacker to cause Denial of Service (DoS) via sscanf function. | Jun 20, 2024 |
| CVE-2024-38620(opens NVD record) | High | 8.8 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. | Jun 20, 2024 |
| CVE-2021-47616(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA: Fix use-after-free in rxe_queue_cleanup On error handling path in rxe_qp_from_init() qp->sq.queue is freed and then rxe_create_qp() will drop last reference to this object. qp clean up function will try to free this queue one time and it causes UAF bug. Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init(). | Jun 19, 2024 |
| CVE-2021-47614(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a user-after-free in add_pble_prm When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE info list. Add the chunk entry to the PBLE info list only after successful setting of the SD in irdma_hmc_sd_one. | Jun 19, 2024 |
| CVE-2021-47613(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: fix completion handling The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed. | Jun 19, 2024 |
| CVE-2021-47611(opens NVD record) | High | 8.1 | In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present. | Jun 19, 2024 |
| CVE-2021-47610(opens NVD record) | Medium | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null ptr access msm_ioctl_gem_submit() Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception | Jun 19, 2024 |
| CVE-2021-47605(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: vduse: fix memory corruption in vduse_dev_ioctl() The "config.offset" comes from the user. There needs to a check to prevent it being out of bounds. The "config.offset" and "dev->config_size" variables are both type u32. So if the offset if out of bounds then the "dev->config_size - config.offset" subtraction results in a very high u32 value. The out of bounds offset can result in memory corruption. | Jun 19, 2024 |
| CVE-2021-47604(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe. | Jun 19, 2024 |
| CVE-2021-47600(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: dm btree remove: fix use after free in rebalance_children() Move dm_tm_unlock() after dm_tm_dec(). | Jun 19, 2024 |
| CVE-2021-47598(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: sch_cake: do not call cake_destroy() from cake_init() qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that. syzbot was able to trigger use after free: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline] WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Modules linked in: CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline] RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8 RSP: 0018:ffffc9000627f290 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44 RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000 FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0 Call Trace: <TASK> tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810 tcf_block_put_ext net/sched/cls_api.c:1381 [inline] tcf_block_put_ext net/sched/cls_api.c:1376 [inline] tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1bb06badb9 Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f. RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688 R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2 </TASK> | Jun 19, 2024 |
| CVE-2021-47588(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: sit: do not call ipip6_dev_free() from sit_init_net() ipip6_dev_free is sit dev->priv_destructor, already called by register_netdevice() if something goes wrong. Alternative would be to make ipip6_dev_free() robust against multiple invocations, but other drivers do not implement this strategy. syzbot reported: dst_release underflow WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173 Modules linked in: CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173 Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48 RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246 RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000 RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358 R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000 FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160 ipip6_dev_free net/ipv6/sit.c:1414 [inline] sit_init_net+0x229/0x550 net/ipv6/sit.c:1936 ops_init+0x313/0x430 net/core/net_namespace.c:140 setup_net+0x35b/0x9d0 net/core/net_namespace.c:326 copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470 create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226 ksys_unshare+0x57d/0xb50 kernel/fork.c:3075 __do_sys_unshare kernel/fork.c:3146 [inline] __se_sys_unshare kernel/fork.c:3144 [inline] __x64_sys_unshare+0x34/0x40 kernel/fork.c:3144 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f66c882ce99 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200 RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000 </TASK> | Jun 19, 2024 |
| CVE-2021-47587(opens NVD record) | Critical | 9.8 | In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. | Jun 19, 2024 |
| CVE-2021-47580(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix type in min_t to avoid stack OOB Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | Jun 19, 2024 |
| CVE-2021-47577(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: io-wq: check for wq exit after adding new worker task_work We check IO_WQ_BIT_EXIT before attempting to create a new worker, and wq exit cancels pending work if we have any. But it's possible to have a race between the two, where creation checks exit finding it not set, but we're in the process of exiting. The exit side will cancel pending creation task_work, but there's a gap where we add task_work after we've canceled existing creations at exit time. Fix this by checking the EXIT bit post adding the creation task_work. If it's set, run the same cancelation that exit does. | Jun 19, 2024 |
| CVE-2021-47576(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 | Jun 19, 2024 |
| CVE-2024-38614(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: openrisc: traps: Don't send signals to kernel mode threads OpenRISC exception handling sends signals to user processes on floating point exceptions and trap instructions (for debugging) among others. There is a bug where the trap handling logic may send signals to kernel threads, we should not send these signals to kernel threads, if that happens we treat it as an error. This patch adds conditions to die if the kernel receives these exceptions in kernel mode code. | Jun 19, 2024 |
| CVE-2024-38612(opens NVD record) | High | 7.0 | In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path. | Jun 19, 2024 |
| CVE-2024-38611(opens NVD record) | High | 7.3 | In the Linux kernel, the following vulnerability has been resolved: media: i2c: et8ek8: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text) | Jun 19, 2024 |
| CVE-2024-38610(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. | Jun 19, 2024 |
| CVE-2024-38606(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate slices count returned by FW The function adf_send_admin_tl_start() enables the telemetry (TL) feature on a QAT device by sending the ICP_QAT_FW_TL_START message to the firmware. This triggers the FW to start writing TL data to a DMA buffer in memory and returns an array containing the number of accelerators of each type (slices) supported by this HW. The pointer to this array is stored in the adf_tl_hw_data data structure called slice_cnt. The array slice_cnt is then used in the function tl_print_dev_data() to report in debugfs only statistics about the supported accelerators. An incorrect value of the elements in slice_cnt might lead to an out of bounds memory read. At the moment, there isn't an implementation of FW that returns a wrong value, but for robustness validate the slice count array returned by FW. | Jun 19, 2024 |
| CVE-2024-38605(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix NULL module pointer assignment at card init The commit 81033c6b584b ("ALSA: core: Warn on empty module") introduced a WARN_ON() for a NULL module pointer passed at snd_card object creation, and it also wraps the code around it with '#ifdef MODULE'. This works in most cases, but the devils are always in details. "MODULE" is defined when the target code (i.e. the sound core) is built as a module; but this doesn't mean that the caller is also built-in or not. Namely, when only the sound core is built-in (CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m), the passed module pointer is ignored even if it's non-NULL, and card->module remains as NULL. This would result in the missing module reference up/down at the device open/close, leading to a race with the code execution after the module removal. For addressing the bug, move the assignment of card->module again out of ifdef. The WARN_ON() is still wrapped with ifdef because the module can be really NULL when all sound drivers are built-in. Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would lead to a false-positive NULL module check. Admittedly it won't catch perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no real problem as it's only for debugging, and the condition is pretty rare. | Jun 19, 2024 |
| CVE-2024-38599(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | Jun 19, 2024 |
| CVE-2024-38592(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash. | Jun 19, 2024 |
| CVE-2024-38590(opens NVD record) | High | 7.1 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level. | Jun 19, 2024 |
| CVE-2024-38587(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds. | Jun 19, 2024 |
| CVE-2024-38583(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. | Jun 19, 2024 |
| CVE-2024-38581(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c | Jun 19, 2024 |
| CVE-2024-38580(opens NVD record) | High | 7.8 | In the Linux kernel, the following vulnerability has been resolved: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines. | Jun 19, 2024 |